PCI Fast Ethernet Adapter NetWare DOS ODI Workstation Driver for Netware (v3.xx & v4.xx) Installation Guide ======================================================================= Installation Procedure: ----------------------- Before you start with the installation process, make sure that the adapter is properly installed and configured. Besides, make sure that your NetWare operating system is properly installed. 1. Execute the following commands in order. LSL MX32MLID IPXODI NETX (or VLM) 2. You can now login to the server. Installation notes: ------------------- 1. Remember to specify LASTDRIVE=E in the CONFIG.SYS file if using the NETX as DOS requester. (specify LASTDRIVE=Z if using the VLM) 2. Since different versions of Netware servers use different default frame type, please make sure that both server & workstation are using the same frame. 3. A typical NET.CFG is given below. Link SUPPORT buffers 8 1514 mempool 4096 link driver MX32MLID frame Ethernet_802.2 frame Ethernet_802.3 frame Ethernet_II frame Ethernet_snap 4. If you want the driver to be run in a specific mode (Half/Full Deplux Mode), what you need to do is to remove the semi-colon in front of the corresponing mode (10HD,10FD,100HD or 100FD) in the NET.CFG file. A typical NET.CFG example to run driver on 100Mbps full deplux mode is given below. Link SUPPORT buffers 8 1514 mempool 4096 link driver MX32MLID frame Ethernet_802.2 frame Ethernet_802.3 frame Ethernet_II frame Ethernet_snap 100FD The default mode is AUTO. And actual transfer mode will be displayed while loading the driver to indicate either FD(Full-Duplex) or HD(Half Duplex). Brand and product names are trademarks of their respective companies. ==End Of File==Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.