1. Intel_Pro_120_B__Ethernet_Adapter.zip Driver
2. PCNFS.TXT File Contents

PCNFS.TXT Driver File Contents (Intel_Pro_120_B__Ethernet_Adapter.zip)

         	PCI Fast Ethernet Adapters 
	NDIS2 MAC Driver for SUN PC-NFS Installation Guide
=========================================================================

The driver named MXNICF contained in the directory
\NDIS20\DOS conforms to the Network Driver Interface
Specification (NDIS) defined by Microsoft/3Com.


NDIS Driver Installation on SUN PC-NFS
--------------------------------------
1. Edit the CONFIG.SYS file to include the following
   command line, and reboot the PC:

   Device=c:\dos\ansi.sys

2. Insert the PC-NFS Installation diskette into the
   PC's floppy drive. Type the following from DOS and
   press <Enter> to bring up the PC-NFS installation
   screen:

   INSTALL      <Enter>

3. Follow screen prompts to configure your screen
   display. For example, press <M> to choose mono display,
   or press <C> to choose color display, or press
   <ESC> to cancel the installation.

4. When the "Install the Basic PC-NFS files" window
   appears on screen, select "Install Full PC-NFS" from
   the choice list.

5. Specify the target PC-NFS installation directory by
   typing the appropriate path in the field provided. For
   example, C:\NFS. Press <Enter> to continue.

6. Carefully read and respond to each prompt that
   appears on screen, indicating the suitable
   selections for your system.

7. When you reach the prompt that reads, "Configure
   an Ethernet network connection," choose "Ethernet"
   from the choice list. Then press <Enter> to confirm
   your choice.

8. Choose the network adapter you will use. Select
   "NDIS" from the list shown on screen. Then press
   <Enter> to confirm your choice.

9. Follow screen instructions to complete the process. You
   will be prompted to insert some PC-NFS distribution
   diskettes. During the process, files from
   the diskettes will be copied into your hard disk
   drive.

10. When prompted to update your AUTOEXEC.BAT and
    CONFIG.SYS files, press "Y."

11. Your system will prompt you when the installation
    process is complete. It will display the following
    message:

       "PC-NFS installation is complete"

12. The system will create two subdirectories
    in the destination drive, namely, \LANMAN and \NFS.

13. Create the NETWORK.BAT, DRIVES,BAT and HOSTS files.
    Specify the PC name, IP address, server name
    and server IP address in these files.
    See the section on Sample Configuration Files
    for examples.

14. Copy the NETWORK.BAT, DRIVES.BAT and HOSTS files
    into the \NFS directory of your server.

15. Copy the MXNICF.DOS file from the \MSLANMAN.DOS\DRIVERS\ETHERNET 
    of your Driver Diskette to the newly created subdirectory (\LANMAN)
    on your destination drive.

    Note: The MXNICF.DOS file is also found in the \NDIS20\DOS
          directory of your Driver Diskette.
	  Rename protocol.nfs file in \lanman directory to a new
	  file name called protocol.ini.	  
	
16. Edit the CONFIG.SYS file using a text editor. Add
    the following command line before the NFS_NDIS
    driver specification:

      DEVICE=C:\LANMAN\MXNICF.DOS

17. Edit the PROTOCOL.INI file in the \LANMAN directory,
    replacing the following:

    a. Replace the section name [your-mac-module]
       with [MXNICF]
    b. Replace the command line "drivername = YOURMAC$" with
       "drivername = MXNICF$"
    c. Replace the command line "bindings = YOUR-MAC-MODULE"
       with "bindings = MXNICF$"
    d. Assign the media type and line speed as used in sample
       PROTOCOL.INI file.

18. Reboot your computer. Then start the application
    you need. For example:
    a. Execute NFSCONF.EXE to configure the system,
       such as mounting a virtual drive E:
    b. Execute TELNET.EXE to do terminal emulation

Sample Configuration Files
--------------------------

1. NETWORK.BAT

   REM stc* is a sample PC-NFS workstation name
   REM sun_srv is a sample PC-NFS server address
   NET START RDR stc*
   NET PCNFSD sun_srv
   NET NAME stc*

2. DRIVES.BAT

   REM specify connections to remote directory
   NET USE l:sun_srv:/usr2/down
   NET USE k:sun_srv:/mnt

3. HOSTS

   REM specify gateway address
   130.66.24.100 <gateway # updated>

   REM specify workstation's IP address
   130.66.24.101 stc

   REM specify server's IP address
   130.66.24.102 sun_srv

4. CONFIG.SYS

   shell=c:\command.com /P /E:526
   dos=high, UMB
   rem ----pcnfs install
   Device=c:\dos\ansi.sys
   DEVICE=C:\NFS\PCNFS.SYS  /m
   DEVICE=C:\NFS\SOCKDRV.SYS
   REM Specify PROTOCOL.INI directory
   DEVICE=C:\LANMAN\PROTMAN.SYS /i:C:\LANMAN
   REM MX98713 NDIS driver name
   device=C:\LANMAN\MXNICF.DOS
   DEVICE=C:\LANMAN\NFS-NDIS.SYS
   FILES=50
   BUFFERS=50
   LASTDRIVE=v
   STACKS=9,256

5. PROTOCOL.INI file at the \LANMAN directory

   [protocol manager]
      drivername = PROTMAN$

   [MXNICF]
   ; PROTOCOL.INI for the PCI Fast Ethernet Adapters
     DriverName = MXNICF$
   ;; Range: 0-7.
   ;; Usage: "Board=nn"
   ;------------------
   ;   Board = 0
   ;
   ;; Options: NWAY, TX10, TX10FD, TX100, TX100FD.
   ;; FD -> Full Duplex
   ;; Usage: "MEDIA_TYPE=xxxxx"
   ;-------------------------
   MEDIA_TYPE = "NWAY" (default value)
   ;
   ; End of this sample file

   [NFS-NDIS]
      drivername = NFSLINK1
      bindings = MXNICF

6. AUTOEXEC.BAT
   ...
   SET TZ=PST8
   SET path=C:\;C:\NFS;C:\LANMAN
   SET NFSDRIVE=D
   REM Add the following line to bind NDIS driver
   C:lanman\netbind
   PRT *
   REM Execute application you need, e.g. NFSRUN
   NFSRUN

Brand and product names are trademarks of their respective companies.

==End Of File==