README.TXT Driver File Contents (DRIVErs.zip)


                   Microsoft Windows 95 Installation
                   for CardBus Fast Ethernet PC Card


  CardBus is supported only in Windows 95 OEM Service Release#2 (OSR2 or
  version 4.00.95b) or Later. Version 4.00.950 and 4.00.95a do not support
  CardBus.

  Contents
  --------
    . How to determine your version
    . Installation Procedures for Win95 OSR2
    . How to update the driver


  How to determine your version
  -----------------------------

    1. Click on the Start

    2. Select Settings

    3. Select the Control Panel

    4. Double-click on the System icon

    5. Select General tab. The system version will be displayed


  Installation Procedures for Win95 OSR2
  --------------------------------------

    1. Start your PC, then insert the PC Card into an available PC Card slot
       in your PC.

    2. After starting Windows 95, the PCI Ethernet Controller will be detected 
       automatically, then the "Update Device Driver Wizard" window appears,
       and Windows displays the message

            "PCI Ethernet Controller"

    3. Insert the CardBus Fast Ethernet PC Card Installation diskette
       into any available floppy drives.

    4. Click the Next button in the "Update Device Driver Wizard" window.
       Win95 will start to search floppy drive for network driver,
       and Windows displays a appropriate product name according to a
       matched INF file.

    5. Click Finish button, when a Insert Disk dialog appears, press OK
       to proceed. Then type A: and press OK. Win95 starts to copy the 
       CardBus Fast Ethernet PC Card driver to the user's hard disk. When
       another Insert Disk dialog appears, press OK again and key-in your
       Win95 operation system source file directory and click OK to proceed. 

    6. Restart your computer if needed and the PC Card should working properly now.


  How to update the driver
  ------------------------

    Before update the driver please plug the PCMCIA card into PCMCIA slot.
    There are 2 steps of procedures to update a LAN driver of Win95.

        .Delete device registration
        .Delete the Driver file

      1. Delete device registration

        1.1 Double click the "System" Icon in "Control panel" Window
        1.2 Press the "Device Manager" button
        1.3 Double click "Network Adapters" to list the devices
        1.4 Select the device and press "Remove" button
        1.5 Press "OK" to confirm device removal

      2. Delete the driver file

        2.1 In DOS command mode, change directory to "\windows\system"
            if your Win95 is installed in "\windows"
        2.2 Delete the LAN driver. You may use "dir *.sys" to see the driver
            file name first

  After the file deletion, return to the Win95 windows mode. Remove the
  PCMCIA card and plug in again. The "New Hardware Found" dialog box should
  appear and start the driver installation.



Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.79