[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCMCIA
[LanguagesSupported]
ENG
[Options]
CB103ND3
[OptionsTextENG]
CB103ND3 = "CardBus Fast Ethernet Attached Port PC Card"
[Source Media Descriptions]
1 = "CardBus Fast Ethernet Attached Port PC Card Driver Diskette"
[Files-Sys]
1,CB103ND3.sys, SIZE=40000
[Files-Dll]
1,Resdlg.dll, SIZE=40000
[Files-Inf]
1, oemsetup.inf, SIZE=40000, RENAME=$(!UG_Filename)
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
SubroutnInf = "SUBROUTN.INF"
SoftwareType = "driver"
NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\Drivers\CB103ND3.sys"
Manufacturer = "PCMCIAs"
ProductMajorVersion = "4"
ProductMinorVersion = "31"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "CB103ND3"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\CB103ND3.sys"
NetRuleSoftwareType = "CB103ND3Sys ndisDriver CB103ND3Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """CB103ND3Sys"" yes no container"
NetRuleSoftwareClass = {"CB103ND3Driver basic"}
NetRuleSoftwareBindable = {"CB103ND3Driver CB103ND3Adapter non exclusive 100"}
ProductHardwareName = "CB103ND3"
NetRuleHardwareType = "CB103ND3 CB103ND3Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"CB103ND3Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
ProductSoftwareDescription = "CardBus Fast Ethernet Attached Port PC Card Driver"
ProductSoftwareTitle = "CardBus Fast Ethernet Attached Port PC Card Driver"
ProductHardwareDescription = "CardBus Fast Ethernet Attached Port PC Card"
ProductHardwareTitle = "CardBus Fast Ethernet Attached Port PC Card"
AdapterType = 5 ;; PCI board
; VendorID = 4332 ;; 0x10EC ;-Wilson 19.07.2001
; CFID = 2168000748 ;; 0x813910EC
; CFID = 2167935212 ;; 0x813810EC ;-Wilson 19.07.2001
CFID = 2869302225 ;; 0xAB0613D1 ;+Wilson 16.08.2001
[PcmciaKeys]
CardManufacturer = "CardBus" ;; Manufactutre Name
CardKeyName = "Fast Ethernet" ;; Product Name
PcmciaPath = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
PcmciaManufacturePath = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(CardManufacturer)
PcmciaProductPath = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(CardManufacturer)"\"$(CardKeyName)
PcmciaRMKeyName = $(!NTN_ServiceBase)"\resman"
PcmciaRMDBKeyName = $(!NTN_ServiceBase)"\resman\MacDataBase"
[GeneralConstants]
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
KeyProduct = ""
KeyParameters = ""
PcmciaKey = ""
PcmciaManufactureKey = ""
PcmciaProductKey = ""
NoTitle = 0
OldVersionExisted = FALSE
DriverPath = $(!STF_NTPATH)\drivers
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "CardBus Fast Ethernet Attached Port PC Card Setup"
[IRQChoices]
IRQ0 = "3",3
IRQ1 = "4",4
IRQ2 = "5",5
IRQ3 = "7",7
IRQ4 = "9",9
IRQ5 = "10",10
IRQ6 = "11",11
IRQ7 = "12",12
IRQ8 = "15",15
[IOBaseAddrChoices]
IOBase_1 = "0x1000",4096
IOBase_2 = "0x1800",6144
IOBase_3 = "0x2000",8192
IOBase_4 = "0x2800",10240
IOBase_5 = "0x3000",12288
IOBase_6 = "0x3800",14336
IOBase_7 = "0x4000",16384
IOBase_8 = "0x4800",18432
IOBase_9 = "0x5000",20480
IOBase_10 = "0x5800",22528
IOBase_11 = "0x6000",24576
IOBase_12 = "0x6800",26624
IOBase_13 = "0x7000",28672
IOBase_14 = "0x7800",30720
IOBase_15 = "0x8000",32768
IOBase_16 = "0x8800",34816
IOBase_17 = "0x9000",36864
IOBase_18 = "0x9800",38912
IOBase_19 = "0xA000",40960
IOBase_20 = "0xA800",43008
IOBase_21 = "0xB000",45056
IOBase_22 = "0xB800",47104
IOBase_23 = "0xC000",49152
IOBase_24 = "0xC800",51200
IOBase_25 = "0xD000",53248
IOBase_26 = "0xD800",55296
IOBase_27 = "0xE000",57344
IOBase_28 = "0xE800",59392
IOBase_29 = "0xF000",61440
IOBase_30 = "0xF800",63488
[MemoryAddrChoices]
MA_1 = "0xC8000", 819200
MA_2 = "0xC9000", 823296
MA_3 = "0xCA000", 827392
MA_4 = "0xCB000", 831488
MA_5 = "0xCC000", 835584
MA_6 = "0xCD000", 839680
MA_7 = "0xCE000", 843776
MA_8 = "0xCF000", 847872
MA_9 = "0xD0000", 851968
MA_10 = "0xD1000", 856064
MA_11 = "0xD2000", 860160
MA_12 = "0xD3000", 864256
MA_13 = "0xD4000", 868352
MA_14 = "0xD5000", 872448
MA_15 = "0xD6000", 876544
MA_16 = "0xD7000", 880640
MA_17 = "0xD8000", 884736
MA_18 = "0xD9000", 888832
MA_19 = "0xDA000", 892928
MA_20 = "0xDB000", 897024
MA_21 = "0xDC000", 901120
MA_22 = "0xDD000", 905216
MA_23 = "0xDE000", 909312
MA_24 = "0xDF000", 913408
[ConnectionChoices]
; Connect_0 = "(0) DEFAULT ", 0
Connect_1 = "(1) AUTO ", 1
Connect_2 = "(2) 10 Half Duplex", 2
Connect_3 = "(3) 10 Full Duplex", 3
Connect_4 = "(4) 100 Half Duplex", 4
Connect_5 = "(5) 100 Full Duplex", 5
[HexDigits]
Hex0 = 0
Hex1 = 1
Hex2 = 2
Hex3 = 3
Hex4 = 4
Hex5 = 5
Hex6 = 6
Hex7 = 7
Hex8 = 8
Hex9 = 9
HexA = A
HexB = B
HexC = C
HexD = D
HexE = E
HexF = F
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[FileDependentDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "EN230"
Caption = "CardBus Fast Ethernet Attached Port PC Card Setup"
Combo1Label = "Interrupt:"
Combo2Label = "I/O Port:"
Combo3Label = "Memory Address:"
Combo4Label = "Connection Type:"
IrqList = ^(IRQChoices, 1)
IoBaseList = ^(IOBaseAddrChoices, 1)
MemAddrList = ^(MemoryAddrChoices, 1)
ConnectionList = ^(ConnectionChoices, 1)
ConnectionValues = ^(ConnectionChoices, 2)
Combo1List = $(IrqList)
Combo1Out = $(IRQLevel)
Combo2List = $(IoBaseList)
Combo2Out = $(IOBaseValue)
Combo3List = $(MemAddrList)
Combo3Out = $(MemAddrValue)
Combo4List = $(ConnectionList)
Combo4Out = $(ConnectionValue)
ComboListItemsIn = {Combo1List, Combo2List, Combo3List, Combo4List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out}
CBOptionsGreyed = {}
RCCtlFocusOn = 403
[Identify]
read-syms Identification
shell "" DebugControl
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
shell "" DebugControl
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($0) == ""
set Status = STATUS_NOLANGUAGE
goto ExitReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto ExitReturnOptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) NOT-IN $(PlatformList)
ifstr(i) $($1) != ""
set Status = STATUS_NOTSUPPORTED
endif
endif
ExitReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
read-syms GeneralConstants
read-syms FileConstants
read-syms FileDependentDlg$(!STF_LANGUAGE)
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)
shell "" DebugControl
StartWait
set LanguageList = ^(LanguagesSupported, 1)
Ifstr(i) $(!NTN_InstallMode) == deinstall
set SubFunction = RemoveAdapter
else-Ifstr(i) $(!NTN_InstallMode) == install
set SubFunction = InstallAdapter
else-Ifstr(i) $(!NTN_InstallMode) == update
set SubFunction = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == configure
set SubFunction = ConfigureAdapter
else
set SubFunction = NoWay
endif
Shell "" $(SubFunction)
EndWait
return $($R0)
[InstallAdapter]
read-syms GeneralConstants
read-syms FileConstants
detect date
set CurrentTime = *($(Now),1)
set SrcDir = $(!p:SrcDir)
set Option = $(!p:Option)
set DoCopy = $(!p:DoCopy)
set AddCopy = $(!p:AddCopy)
set KeyProduct = $(KeyNull)
set DoSetup = TRUE
set OldVersionExisted = FALSE
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), +
$(ProductVersion)
ifstr(i) $($R1) != "OK"
Return STATUS_FAILED
endif
else
Shell $(UtilityInf), CardExistedDlg
ifstr(i) $($R1) != "OK"
Return STATUS_FAILED
endif
set OldVersionExisted = TRUE
endif
endif
IfStr(i) $(DoSetup) == TRUE
set IRQLevel = 11
set IOBaseValue = 4096 ;; 0x1000
set MemAddrValue = 884736 ;; 0xD8000
set ConnectionValue = "AutoSense"
set DLLPATH = ""
ifstr(i) $(DoCopy) == "YES"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
set DLLPATH = $(!STF_CWDDIR)
else
set BuiltIn = "YES"
ifstr(i) $(!NTN_Origination) == "NCPA"
Set BuiltIn = "NO"
endif
Shell $(UtilityInf) DoAskSource $(!STF_CWDDIR) $(SrcDir) $(BuiltIn)
set DLLPATH = $($R1)
set SrcDir = $($R1)
endif
endif
dowind =+
install "Install-Dll"
Shell "" AdapterSetup
IfStr(i) $($R0) != TRUE
Return STATUS_USERCANCEL
endif
IfStr(i) $(OldVersionExisted) == FALSE
Shell "" SetCopy $(DoCopy) $(AddCopy) $(SrcDir) "Install-Option"
IfStr(i) $($R0) == TRUE
Shell "" SetSoftware $(CurrentTime)
IfStr(i) $($R0) != TRUE
Return STATUS_FAILED
endif
endif
endif
Shell "" SetHardware $(CurrentTime)
IfStr(i) $($R0) == TRUE
Shell "" WriteParameters
endif
endif
IfStr(i) $($R0) == TRUE
Return STATUS_SUCCESSFUL
else
Return STATUS_FAILED
endif
[ConfigureAdapter]
set Option = $(!p:Option)
read-syms GeneralConstants
read-syms FileConstants
read-syms FileDependentDlg$(!STF_LANGUAGE)
set DLLPATH = $(!STF_CWDDIR)
ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf) RegistryErrorString CANNOT_CONFIGURE_SOFTWARE
Shell "" ShellError $($R0)
Return STATUS_FAILED
endif
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Shell $(UtilityInf) RegistryErrorString CANNOT_FIND_COMPONENT_SERVICE
Shell "" ShellError $($R0)
Return STATUS_FAILED
endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifstr(i) $($R0) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return STATUS_FAILED
endif
Set !KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(!KeyParameters) == $(KeyNull)
Shell $(UtilityInf) RegistryErrorString CANNOT_FIND_COMPONENT_SERVICE
Shell "" FatalError $($R0)
Return STATUS_FAILED
endif
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(!KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
Ifstr(i) $(ValueName) == "InterruptNumber"
set IRQLevel = $(ValueData)
else-ifstr(i) $(ValueName) == "IOBaseAddress"
set IOBaseValue = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryBaseAddress"
set MemAddrValue = $(ValueData)
else-ifstr(i) $(ValueName) == "DuplexMode"
set ConnectionIndex = $(ValueData)
endif
EndForListDo
set ConnectionValue = *($(ConnectionList), ~($(ConnectionValues), $(ConnectionIndex)))
ifstr(i) $(ConnectionValue) == ""
set ConnectionValue = *($(ConnectionList), 1)
endif
winagn =+
Shell "" AdapterSetup
IfStr(i) $($R0) != TRUE
Return STATUS_USERCANCEL
endif
Shell "" WriteParameters
IfStr(i) $($R0) == TRUE
Return STATUS_SUCCESSFUL
else
Return STATUS_FAILED
endif
[NoWay]
read-syms GeneralConstants
Shell "" ShellError "NoWay"
Return STATUS_FAILED
[RemoveAdapter]
read-syms GeneralConstants
read-syms FileConstants
set Option = $(!p:Option)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifstr(i) $($R0) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return STATUS_FAILURE
endif
Return STATUS_SUCCESSFUL
[UpgradeSoftware]
read-syms GeneralConstants
read-syms FileConstants
set SrcDir = $(!p:SrcDir)
set Option = $(!p:Option)
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Return STATUS_FAILED
endif
set DoCopy = YES
set AddCopy = YES
Shell "" SetCopy $(DoCopy) $(AddCopy) $(SrcDir) "Install-Update"
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) == $(KeyNull)
Return STATUS_FAILED
endif
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" $(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) == $(KeyNull)
Return STATUS_FAILED
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName) $(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) == $(KeyNull)
Return STATUS_FAILED
endif
CloseRegKey $(ServiceKey)
endif
Return STATUS_SUCCESSFUL
[AdapterSetup]
set Option = $(!p:Option)
read-syms FileDependentDlg$(!STF_LANGUAGE)
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)
read-syms GeneralConstants
read-syms FileConstants
set Combo1Out = $(!p:IRQLevel)
set-dectohex Combo2Out = $(!p:IOBaseValue)
set-dectohex Combo3Out = $(!p:MemAddrValue)
set Combo4Out = $(!p:ConnectionValue)
set DLLPATH = $(!p:DLLPATH)
ifstr(i) $(DLLPATH) != ""
Split-String $(DLLPATH) "\" TempList
QueryListSize ListSize $(TempList)
ifstr(i) *($(TempList), $(ListSize)) != "\"
set DLLPATH = $(DLLPATH)"\"
endif
endif
set AdapterStatus = FALSE
set NotifyFields = {NO, NO, NO, NO}
set EditTextIn = ""
set EditTextLim = ""
set EditFocusOn = ""
loadlibrary "CardBus Fast Ethernet Attached Port PC Card Driver Diskette" $(DLLPATH)resdlg.dll DllHandle
RetryDialog =+
EndWait
ui start "InputDlg" $(DllHandle)
StartWait
ifstr(i) $(DLGEVENT) == "CONTINUE"
set AdapterStatus = TRUE
endif
set !p:IRQLevel = $(Combo1Out)
set-hextodec !p:IOBaseValue = $(Combo2Out)
set-hextodec !p:MemAddrValue = $(Combo3Out)
set !p:ConnectionValue = $(Combo4Out)
set !p:ConnectionIndex = *($(ConnectionValues), ~($(ConnectionList), $(Combo4Out)))
ui pop 1
ifstr(i) $(DLGEVENT) == "CONTINUE"
IfStr(i) $(!STF_NCDETINFO) == {}
Set !p:BusType = 0
Set !p:BusNumber = 0
Else
Set !p:BusType = *($(!STF_NCDETINFO),5)
Set !p:BusNumber = *($(!STF_NCDETINFO),6)
EndIf
Endif
freelibrary $(DllHandle)
return $(AdapterStatus)
[SetCopy]
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
set DoCopy = $($0)
set AddCopy = $($1)
set SrcDir = $($2)
set InstallSection = $($3)
set Needcopy = FALSE
Ifstr(i) $(DoCopy) == "YES"
set NeedCopy = TRUE
else-ifstr(i) $(AddCopy) == "YES"
set NeedCopy = TRUE
else
Return TRUE
endif
set BuiltIn = "YES"
ifstr(i) $(!NTN_Origination) == "NCPA"
set BuiltIn = "NO"
endif
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) $(BuiltIn)
Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
Shell "" FatalError $($R0)
Return FALSE
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Return FALSE
Endif
Set SrcDir = $($R1)
install $(InstallSection)
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
Shell "" FatalError $($R0)
Return FALSE
endif
Return TRUE
[SetSoftware]
read-syms GeneralConstants
read-syms FileConstants
read-syms date
set Option = $(!p:Option)
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Ifstr(i) $($R0) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),$($0)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $($R0) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
return TRUE
[SetHardware]
read-syms GeneralConstants
read-syms FileConstants
read-syms date
set Option = $(!p:Option)
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set !KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),$($0)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $(!KeyParameters)
CloseRegKey $(KeyAdapterRules)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
CloseRegKey $(KeyAdapterRules)
return TRUE
[WriteParameters]
read-syms FileConstants
read-syms GeneralConstants
set Option = $(!p:Option)
set IoBase = $(!p:IOBaseValue)
set Irq = $(!p:IRQLevel)
set MemAddr = $(!p:MemAddrValue)
set MediaIndex = $(!p:ConnectionIndex)
set BusType = $(!p:BusType)
set BusNumber = $(!p:BusNumber)
set EarlyTxThreshold = 56
Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNumber)},+
{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(AdapterType)},+
;; {CardType,$(NoTitle),$(!REG_VT_DWORD),2},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(CFID)},+
{IOBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBase)},+
{MemoryBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(MemAddr)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(Irq)},+
{DuplexMode,$(NoTitle),$(!REG_VT_DWORD),$(MediaIndex)},+
;; {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
{EarlyTxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(EarlyTxThreshold) },+
{ChipOnCardbus,$(NoTitle),$(!REG_VT_DWORD),1},+
{TxMaxDMABurst, $(NoTitle),$(!REG_VT_DWORD),6},+
{RxMaxDMABurst, $(NoTitle),$(!REG_VT_DWORD),6},+
{TxInterFrameGap, $(NoTitle),$(!REG_VT_DWORD),3},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),0}}
Shell $(UtilityInf), AddValueList, $(!KeyParameters), $(NewValueList)
Set Status = $($R0)
Shell "" SetUpPcmcia
CloseRegKey $(!KeyParameters)
Ifstr(i) $(Status) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $(Status)
Shell "" ShellError $($R0)
Return FALSE
endif
Return TRUE
[ShellError]
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)
set DlgType = "MessageBox"
set STF_MB_TITLE = $(FunctionTitle)
set STF_MB_TEXT = $($0)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ifstr(i) $(STF_MB_TEXT) == ""
set STF_MB_TEXT = "Unknown Error"
endif
ui start "Error Message"
Return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[FatalError]
read-syms FileConstants
ifstr(i) $($0) == ""
set Message = "Unknown Error"
else
set Message = $($0)
endif
Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) FATAL $(Message)
Return
[VerifyError]
read-syms FileConstants
ifstr(i) $($0) == ""
set Message = "Unknown Error"
else
set Message = $($0)
endif
Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) WARNING $(Message)
Return $($R1)
[WarnError]
read-syms FileConstants
ifstr(i) $($0) == ""
set Message = "Unknown Error"
else
set Message = $($0)
endif
Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) NONFATAL $(Message)
Return
[DebugControl]
set !DebugOutputControl = 1
return
[SetUpPcmcia]
Read-Syms FileConstants
Read-Syms PcmciaKeys
Read-Syms GeneralConstants
Debug-Output "Opening PCMCIA DataBase"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaPath) $(MAXIMUM_ALLOWED) PcmciaKey
IfStr(i) $(PcmciaKey) == $(KeyNull)
Debug-Output "Failed to open "$(PcmciaPath)
Shell "" FatalError "Cannot Open PCMCIA Registry DataBase!"
Return FALSE
EndIf
Debug-Output "Opening PCMCIA Manufacture Key"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaManufacturePath) $(MAXIMUM_ALLOWED) PcmciaManufactureKey
IfStr(i) $(PcmciaManufactureKey) == $(KeyNull)
Debug-Output "Open failed - creating key"
CreateRegKey $(PcmciaKey) {$(CardManufacturer), 0, 0 } "" $(MAXIMUM_ALLOWED) "" PcmciaManufactureKey
IfStr(i) $(PcmciaManufactureKey) == $(KeyNull)
Debug-Output "Failed to create PCMCIA Manufacture key"
Shell "" FatalError "Cannot Create Manufacture Key in Registry DataBase PCMCIA!"
CloseRegKey $(PcmciaKey)
Return FALSE
EndIf
EndIf
Debug-Output "Opening PCMCIA Product Key = "$(PcmciaProductPath)
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaProductPath) $(MAXIMUM_ALLOWED) PcmciaProductKey
IfStr(i) $(PcmciaProductKey) == $(KeyNull)
Debug-Output "Open failed - creating key"
CreateRegKey $(PcmciaManufactureKey) {$(CardKeyName), 0, 0 } "" $(MAXIMUM_ALLOWED) "" PcmciaProductKey
IfStr(i) $(PcmciaProductKey) == $(KeyNull)
Shell "" FatalError "Cannot Create PCMCIA Product Key in Registry DataBase PCMCIA!"
CloseRegKey $(PcmciaManufactureKey)
CloseRegKey $(PcmciaKey)
Return FALSE
EndIf
EndIf
Debug-Output "Writing Driver Keyword"
SetRegValue $(PcmciaProductKey) {DeviceType, 0, $(!REG_VT_SZ), NET}
SetRegValue $(PcmciaProductKey) {Driver, 0, $(!REG_VT_SZ), $(ProductSoftwareName)}
CloseRegKey $(PcmciaProductKey)
CloseRegKey $(PcmciaManufactureKey)
CloseRegKey $(PcmciaKey)
Debug-Output "Opening CardWizard Resource Manager"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMKeyName) $(MAXIMUM_ALLOWED) PcmciaRMKey
ifstr $(PcmciaRMKey) == $(NULL)
Debug-Output "Systemsoft CardWizard service not present"
Debug-Output "Disable the Pcmcia.Sys"
set PcmciaSysKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaSysKeyName) $(MAXIMUM_ALLOWED) PcmciaSysKey
; SetRegValue $(PcmciaSysKey) {Start, 0, $(!REG_VT_DWORD),4} ; '4' disables the driver
CloseRegKey $(PcmciaSysKey)
else
set SystemsoftPresent = $(TRUE)
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMDBKeyName) $(MAXIMUM_ALLOWED) PcmciaRMDBKey
ifstr $(PcmciaRMDBKey) == $(NULL)
debug-output "Adding "$(PcmciaRMDBKeyName)
CreateRegKey $(PcmciaRMKey) {"MacDataBase" , 0, 0} "" $(MAXIMUM_ALLOWED) "" PcmciaRMDBKey
CloseRegKey PcmciaRMDBKey
endif
CloseRegKey $(PcmciaRMKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMDBKeyName) $(MAXIMUM_ALLOWED) PcmciaRMDBKey
ifstr $(PcmciaRMDBKey) == $(NULL)
Debug-Output "Systemsoft CardWizard service not present"
else
Debug-Output $(PcmciaRMDBKeyName)"\"$(CardManufacturer)
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMDBKeyName)"\"$(CardManufacturer) $(MAXIMUM_ALLOWED) PcmciaManufactureKey
ifstr $(PcmciaManufactureKey) == $(NULL)
debug-output "Adding "$(PcmciaRMDBKeyName)"\"$(CardManufacturer)
CreateRegKey $(PcmciaRMDBKey) {$(CardManufacturer), 0, 0} "" $(MAXIMUM_ALLOWED) "" PcmciaManufactureKey
else
debug-output "Manufacture sub key already exist"
endif
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMDBKeyName)"\"$(CardManufacturer)"\"$(CardKeyName) $(MAXIMUM_ALLOWED) PcmciaProductKey
ifstr $(PcmciaProductKey) == $(NULL)
debug-output "Adding "$(PcmciaRMDBKeyName)"\"$(CardManufacturer)"\"$(CardKeyName)
CreateRegKey $(PcmciaManufactureKey) {$(CardKeyName), 0, 0} "" $(MAXIMUM_ALLOWED) "" PcmciaProductKey
SetRegValue $(PcmciaProductKey) {MacDriverHandle, 0, $(!REG_VT_DWORD),0}
SetRegValue $(PcmciaProductKey) {MacDriverName,0,$(!REG_VT_SZ),$(ProductSoftwareName)}
SetRegValue $(PcmciaProductKey) {MacDriverState,0,$(!REG_VT_DWORD),1}
SetRegValue $(PcmciaProductKey) {MacDriverVersion,0,$(!REG_VT_DWORD),$(ProductMajorVersion)$(ProductMinorVersion)}
SetRegValue $(PcmciaProductKey) {MacSwapCapability,0,$(!REG_VT_DWORD),2}
else
debug-output "Device sub key already exist"
GetRegValue $(PcmciaProductKey),+"MacDriverName",GetData
ifstr *($(GetData),7) != $(ProductSoftwareName)
SetRegValue $(PcmciaProductKey) {MacDriverHandle, 0, $(!REG_VT_DWORD),0}
SetRegValue $(PcmciaProductKey) {MacDriverName,0,$(!REG_VT_SZ),$(ProductSoftwareName)}
SetRegValue $(PcmciaProductKey) {MacDriverState,0,$(!REG_VT_DWORD),1}
SetRegValue $(PcmciaProductKey) {MacDriverVersion,0,$(!REG_VT_DWORD),$(ProductMajorVersion)$(ProductMinorVersion)}
SetRegValue $(PcmciaProductKey) {MacSwapCapability,0,$(!REG_VT_DWORD),2}
endif
endif
CloseRegKey $(PcmciaProductKey)
CloseRegKey $(PcmciaManufactureKey)
CloseRegKey $(PcmciaRMDBKey)
endif
Debug-Output "All done with SetUpPcmcia"
return TRUE
;
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.