****************************************************************************
Fast Ethernet Controller Provider Inc.
PCI 10/100 Fast Ethernet Adapter
NDIS 5 Miniport Driver For Windows 98/98_SE Installation
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Copyright (C) 2000 Fast Ethernet Controller Provider Inc.
All rights reserved.
****************************************************************************
The driver conforms to the Network Driver Interface Specification (NDIS)5.0,
and used with Microsoft Windows OS.
Contents
--------
A) Install NDIS5.0 Miniport driver to Microsoft Windows 98/98_SE
B) Configure NDIS5.0 Miniport driver to Microsoft Windows 98/98_SE
A) Installing NDIS 5 Miniport driver to Microsoft Windows 98/98_SE
==================================================================
1. Plug the PCI 10/100 Fast Ethernet Adapter into one of the Master PCI
slots of your PCI platform.
2. Turn ON the power of PC then boot into Windows 98/98_SE.
3. Windows 98/98_SE will prompt "PCI Ethernet Controller" in "New Hardware
Found" dialog box and "Update Device Driver Wizard" dialog box.
4. Click "Next" button when "Search for the best driver for your device"
[Recommended] is on.
5. Insert the PCI 10/100 Fast Ethernet Adapter Driver Diskette in your
floppy drive.
6. Disable the "Floppy disk drives" check box. Click "Specify a location",
type "A:\WIN98" and then click "Next" button.
7. Windows 98/98_SE will prompt "PCI 10/100 Fast Ethernet Adapter" in "Add
New Hardware Wizard" dialog box.
8. Click "Next" button and Windows starts to copy files from Windows
98/98_SE CD-ROM to your hard disk.
9. Click "Finish" button from "Add New Hardware Wizard" dialog box.
10. Remove the Adapter Driver Diskette from your floppy drive.
11. Restart your computer to implement the network function.
B) Configuring NDIS5.0 Miniport driver to Microsoft Windows 98/98_SE
====================================================================
1. Click the "My Computer" icon in the Main Program Group.
2. Click the "Control Panel" icon from My Computer window.
3. Click the "Network" icon from the Control Panel window.
4. Select "PCI 10/100 Fast Ethernet Adapter" item from "Network" dialog box,
then click "Properties" button.
5. Click "Advanced" button from "PCI 10/100 Fast Ethernet Adapter Properties"
dialog box.
6. Select the Media Type value (AutoDetect, 10BaseT, 10BaseT Full_Duplex,
100BaseTX, 100BaseTX Full_Duplex) from "Value" item, then click OK
button from "PCI 10/100 Fast Ethernet Adapter Properties" dialog box.
7. Click OK button from "Network" dialog box.
8. Restart your computer for the new configuration to take effect.
Trademarks:
Microsoft Windows 98 and 98_SE is a trademark of Microsoft Corporation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.