Symbios Logic SDMS 4.0 PCI UnixWare 2.0 C8XX-4.04.00 BTLD Diskette Building Instructions: To create a C8XX BTLD disk to use with UnixWare 2.0, you must copy the raw dd image file onto a 1.44 MB floppy. The process for doing this will depend on what operating system you are using to create the disk. ---------- IF YOU ARE USING A UNIX SYSTEM: 1) Insert a 3.5" diskette into the floppy drive. 2) At the UNIX prompt type: dd if=/<path>/PKG40400.DD of=/dev/rfd0 The <path> is where the dd image is located. This command will dd the image to the floppy to create a C8XX BTLD disk. ---------- IF YOU ARE USING A DOS SYSTEM: 1) Use a utility which will copy a raw image onto a 1.44 MB floppy to copy the file "PKG40400.DD" onto a 3.5" diskette. (One such utility is "Rawrite" which is public domain. Instructions for using this utility are included in its accompanying "doc" file.) Upon copying the image to a 3.5" disk, it is ready to use as a C8XX BTLD disk with UnixWare 2.0.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.