ldistrib.txt Driver File Contents (Lan.zip)

Using Intel(R) Network Adapters with Linux* --
Information for Specific Linux Distributions
==============================================

December 12, 2003


Contents
========

- SuSE SLES 8 and United Linux 1.0 SP2 RC1/IA64 cause unresolved symbols		
- Caldera OpenLinux* 3.1
- Red Hat* 7.1
- SuSE* 7.1
- ACPI enable may cause Dual Port Pro/1000 adapters to fail
- Linux SNMP: Set operation fails on RH3.0-RC1
- Support

SuSE SLES 8 and United Linux 1.0 SP2 RC1/IA64 cause unresolved symbols
======================================================================

If you get unresolved symbol errors when loading the e1000 driver, perform 
the following:

1. cd /usr/src/linux
2. make cloneconfig
3. make dep

Then rebuild the driver.

Caldera* OpenLinux 3.1
======================

  Installing Intel ANS
  --------------------
  In Caldera OpenLinux* 3.1, the super-user's executable path does not 
  include /usr/sbin/, which is the default location selected by the makefile
  for Intel ANS installation. This causes problems later during the 
  configuration stage. To solve this, either permanently add /usr/sbin to 
  root's executable path, or modify the makefile to set BIN_DIR to a 
  preferred directory that is super-user specific and that appears in $PATH.

  Compiling Intel Drivers on Itanium(TM)-Based Systems
  ----------------------------------------------------
  When compiling the e100 and e1000 drivers, various unresolved symbol 
  errors may appear. These messages may be disregarded as the drivers will 
  install and function properly on Caldera OpenLinux 3.1 Itanium(TM)-based 
  systems.


Red Hat* 7.1
============

  Creating an RPM from tar / zipped File
  --------------------------------------
  When trying to generate an RPM from the .tar.gz file, a segmentation fault 
  (core dump) occurs. This failure occurs because Red Hat* 7.1 uses version 
  4.0.2 of the RPM utility. This version does not have the ability to handle
  parameterized macros, which are used within the e100 and e1000 spec files 
  to generate an RPM. Updating the RPM utility to a more current version 
  resolves the issue. The utility can be obtained from http://www.rpm.org.


ACPI enable may cause Dual Port PRO/1000 Adapters to fail
=========================================================

  If ACPI is turned on in the kernel, dual port adapters may not work. 
  This is due to a limitation in ACPI. Currently, this affects all new 
  versions of SuSE and the United Linux family.

Linux SNMP: Set operation fails on RH 3
=======================================

  Running the set operation using Red Hat 3 fails when using the
  net-snmp-5.0.8 package. This issue has been fixed in net-snmp-5.0.9 
  package.

Support
=======

For general information and support, go to the Intel support website at:

     http://support.intel.com

If an issue is identified with the released source code on the supported 
kernel with a supported adapter, email the specific information related to 
the issue to linux.nics@intel.com.


Copyright and Legal Disclaimers
===============================

Copyright(c) 2003 Intel Corporation. All rights reserved. 

Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 

Intel Corporation assumes no responsibility for errors or omissions in this 
document. Nor does Intel make any commitment to update the information 
contained herein. 

Intel, Itanium, and Pentium are trademarks or registered trademarks of Intel 
Corporation or its subsidiaries in the United States and other countries. 

*Other names and brands may be claimed as the property of others.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.84