1. 9504980.exe Driver
2. TRANSMIT.TXT File Contents

TRANSMIT.TXT Driver File Contents (9504980.exe)

     RELEASE NOTES CABRILLO HSC REL63                 07/30/99

OVERVIEW

REsolved problem with SCSI BIOS error on warm reboot of Windows.

CHANGES SINCE PREVIOUS VERSION (v0.62)

IMB Commands added:
- None

Fixed DCS Issues:
- DCS #18134 

DEPENDENCIES:
-None 

USAGE RESTRICTIONS:
-None

INTELLIGENT MANAGEMENT BUS (IMB)
LIST OF SUPPORTED APPLICATION COMMANDS
- Get Device ID
- Cold Reset
- Get Self Test Results
- Mfg Test On
- Broadcast 'Get Device ID'
- Write Port
- Read Port
- Write Memory
- Read Memory
- Set Fault Light 
- Get Enclosure Configuration
- Get Enclosure Status
- Get Slot Status
- (UNSUPPORTED) Power Fans

LIST OF SUPPORTED STORAGE COMMANDS
- Get FRU Inventory Area
- Read FRU Inventory Data
- Write FRU Inventory Data

LIST OF SUPPORTED SENSOR/EVENT COMMANDS
- Set Sensor Hysterisis
- Get Sensor Hysterisis
- Set Sensor Threshold
- Get Sensor Threshold
- Set Sensor Event Message Enable
- Get Sensor Event Message Enable
- Rearm Sensor Events
- Get Sensor Event Status
- Get Sensor Reading
- Set Event Receiver
- Get Event Receiver
- Event Message

LIST OF SUPPORTED FIRMWARE TRANSFER COMMANDS
- Enter Firmware Transfer Mode
- Firmware Program
- Firmware Read
- Get Firmware Range Checksum
- Exit Firmware Transfer Mode

SMALL COMPUTER SERIAL INTERFACE (SCSI)

MESSAGES
- Abort
- Bus Reset
- Command Complete
- Indentify
- Initiator Detected Error
- No Operation
- Message Parity Error
- Message Reject 

COMMANDS
- Inquiry
- Read Buffer
- Request Sense
- Send Diagnostic
- Test Unit Ready
- Write Buffer

SCSI ACCESSED FAULT TOLERANT ENCLOSURES (SAF-TE)
- Read Enclosure Configuration
- Read Enclosure Status
- Read Device Slot Status
- Write Device Slot Status
- Write Perform Slot Status
- Send Global Command

ROM CHECKSUM:  0x5A7C
OP CODE CHECKSUM: 0xA4AE

Operational mode:       Major 0, Minor 63
Flash update mode:      Major 0, Minor 20

FILE VERSION TAGS

BOOT FLASH FILES                v0.20
SCHEDULER FILES                 v0.25
IMB FILES                       v0.38_3
SENSOR FILES                    v0.32
HSC-SPECIFIC FILES              v0.63
HSC-SHARED                      v0.61_2

TOOLS USED IN BUILD
convert.exe     version 1.25 (pvcs v0.01)
h2inc.exe       version 1.01
h2mac.exe       version 1.01
c51             version 5.10
a51             version 5.10
bl51            version 3.52
nmake           version 1.60


 (end)

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.