RELEASE NOTES SITKA HSC REL61 TEST CODE 07/16/98 OVERVIEW Fixed the SCSI bus performance issue and migrated latest IMB/I2C library into the build to address the I2c retry issue. CHANGES SINCE PREVIOUS VERSION (v0.55) IMB Commands added: - None DEPENDENCIES: -None USAGE RESTRICTIONS: -None OTHER: -FRU Access implemented. -Sensor Access implemented. INTELLIGENT MANAGEMENT BUS (IMB) LIST OF SUPPORTED APPLICATION COMMANDS - Get Device ID - Cold Reset - Get Self Test Results - Mfg Test On - Broadcast 'Get Device ID' - Write Port - Read Port - Write Memory - Read Memory - Set Fault Light - Get Enclosure Configuration - Get Enclosure Status - Get Slot Status - (UNSUPPORTED) Power Fans LIST OF SUPPORTED STORAGE COMMANDS - Get FRU Inventory Area - Read FRU Inventory Data - Write FRU Inventory Data LIST OF SUPPORTED SENSOR/EVENT COMMANDS - Set Sensor Hysterisis - Get Sensor Hysterisis - Set Sensor Threshold - Get Sensor Threshold - Set Sensor Event Message Enable - Get Sensor Event Message Enable - Rearm Sensor Events - Get Sensor Event Status - Get Sensor Reading - Set Event Receiver - Get Event Receiver - Event Message LIST OF SUPPORTED FIRMWARE TRANSFER COMMANDS - Enter Firmware Transfer Mode - Firmware Program - Firmware Read - Get Firmware Range Checksum - Exit Firmware Transfer Mode SMALL COMPUTER SERIAL INTERFACE (SCSI) MESSAGES - Abort - Bus Reset - Command Complete - Indentify - Initiator Detected Error - No Operation - Message Parity Error - Message Reject COMMANDS - Inquiry - Read Buffer - Request Sense - Send Diagnostic - Test Unit Ready - Write Buffer SCSI ACCESSED FAULT TOLERANT ENCLOSURES (SAF-TE) - Read Enclosure Configuration - Read Enclosure Status - Read Device Slot Status - Write Device Slot Status - Write Perform Slot Status - Send Global Command ROM CHECKSUM: 0x6A61 HEX CODE FILE: SHSC61.HEX Operational mode: Major 0, Minor 61 Flash update mode: Major 0, Minor 20 FILE VERSION TAGS BOOT FLASH FILES v0.20 SCHEDULER FILES v0.19 IMB FILES v0.38_3 SENSOR FILES v0.32 HSC-SPECIFIC FILES v0.61 TOOLS USED IN BUILD convert.exe version 1.25 (pvcs v0.01) h2inc.exe version 1.01 h2mac.exe version 1.01 c51 version 5.10 a51 version 5.10 bl51 version 3.52 nmake version 1.60 (end)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.