D-Link DE-660+ Ethernet PC Card Installation for NetWare Server 4.11 Driver Contents ÍÍÍÍÍÍÍÍ Introduction Getting Started First time installation from the install menu The other time installation from the install menu Modifying an existing NetWare 4.11 Server Introduction ÍÍÍÍÍÍÍÍÍÍÍÍ This installation assumes that the PC Card drivers are working properly. Please consult INST_DOS.TXT for help with PC Card Drivers. Getting Started will describe the installation instructions. Getting Started ÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ****************************************************************** * Notes: * * The PC Card should be enabled by Card Enabler. * * Please run DSCDP.EXE before starting LAN driver. * * * * Two alternatives to enable the D-Link DE-660+ Ethernet PC * * Card: * * 1. Issue an executive file: * * * * At the DOS prompt, type: * * * * DSCDP [/iop:XXX] [/irq:X] * * * * For more details, refer to INST_DOS.txt. * * * * 2. Modify CONFIG.SYS * * * * Add the following instruction to CONFIG.SYS file * * * * DEVICE=<PATH>\DSCDP.EXE [/iop:XXX] [/irq:X] * * * * ; <PATH> is the directory containing DSCDP.EXE * * ; Please refer to the INST_DOS.TXT file for details. * ****************************************************************** First time installation from the install menu ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Start the NetWare Server. > CD \NWSERVER > SERVER Execute "LOAD INSTALL" after booting up. Type: LOAD INSTALL Select "Driver options", -> "Configure network drivers", and -> "Select a driver". Press <Insert> key to install an unlisted driver. Please insert driver diskette into floppy disk drive. Press <F3> to specify a different <PATH>. <PATH> is directory which includes both DE660P.LAN and DE660P.LDI Ex. A:\NETWARE\SERVER\NW411 Select "DE660P.LAN ....". Select "Save parameters and load driver" after configuring adapter setting. NetWare server will loading/binding driver automatically. Specify "I/O port" and "Interrupt number" while NetWare server is loading the driver, and these values should be consistent with the values set by DSCDP.EXE. After the driver has been loaded, check whether all the frame types you want are specified for this driver in AUTOEXEC.NCF. The other time installation from the install menu ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Start the NetWare Server. > CD \NWSERVER > SERVER Execute "LOAD INSTALL" after booting up. Type: LOAD INSTALL Select "Driver options", -> "Configure network drivers", and -> "Select a driver". Select "DE660P.LAN ...." in Select a driver window. Select "Save parameters and load driver" after configuring adapter setting. NetWare server will loading/binding driver automatically. Specify "I/O port" and "Interrupt number" while NetWare server is loading the driver, and these values should be consistent with the values set by DSCDP.EXE. After the driver has been loaded, check whether all the frame types you want are specified for this driver in AUTOEXEC.NCF. Modifying an existing NetWare 4.11 Server ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Make a sub-directory NLMS.OLD under NWSERVER directory. Ex. >MD \NWSERVER\NLMS.OLD Save MSM.NLM, ETHERTSM.NLM to NLMS.OLD sub-directory. Please insert driver diskette into floppy disk drive. Copy all provided NLM and LAN files into your dos directory which includes SERVER.EXE. Ex. >COPY A:\NETWARE\SERVER\NW411\MSM.NLM C:\NWSERVER >COPY A:\NETWARE\SERVER\NW411\ETHERTSM.NLM C:\NWSERVER >COPY A:\NETWARE\SERVER\NW411\DE660P.LAN C:\NWSERVER >COPY A:\NETWARE\SERVER\NW411\DE660P.LDI C:\NWSERVER Start the NetWare Server. > CD \NWSERVER > SERVER From the Novell Server side, execute "LOAD INSTALL". Type: LOAD INSTALL Select <NCF files options> Select <Edit AUTOEXEC.NCF file> Add the following commands into the server's AUTOEXEC.NCF file. Search Add C:\NWSERVER LOAD C:\NWSERVER\MSM.NLM LOAD C:\NWSERVER\ETHERTSM.NLM LOAD DE660P PORT=300 INT=3 FRAME=Ethernet_802.3 NAME=DE_1_E83 BIND IPX DE_1_E83 NET=1111 LOAD DE660P PORT=300 INT=3 FRAME=Ethernet_802.2 NAME=DE_1_E82 BIND IPX DE_1_E82 NET=1113 LOAD DE660P PORT=300 INT=3 FRAME=Ethernet_II NAME=DE_1_EII BIND IPX DE_1_EII NET=1115 LOAD DE660P PORT=300 INT=3 FRAME=Ethernet_SNAP NAME=DE_1_ESP BIND IPX DE_1_ESP NET=1117 Note: the PORT and INT parameters should be set as the values which are set by DSCDP.EXE. Restart the server again.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.