============================================================================= Intel(R) Server Board SE7210TP1-E BIOS RELEASE NOTES ============================================================================= Intel Enterprise Platform & Services Marketing Intel Corporation 2111 N.E. 25th Avenue, Hillsboro, OR 97124 USA ============================================================================= DATE: April 29, 2004 TO: Intel(R) server board SE7210TP1-E (15A) customers SUBJECT: Production BIOS Release Notes release 03.10 (build 0030) ============================================================================= Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel Corporation may have patents or pending patent applications, trademarks, copyrights, or other intellectual property rights that relate to the presented subject matter. The furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Intel is a registered trademark of Intel Corporation. *Other names and brands are the property of their respective owners. Copyright (c) 2004 Intel Corporation. ============================================================================= ABOUT THIS RELEASE ============================================================================= Build # : 0030 Build Stamp : SE7210TP10.15A.P.03.10.0030.042920040839 Build Date : 29 April 2004 Checksum : 089781C5 ============================================================================= BIOS COMPONENTS/CONTENTS ============================================================================= PXE 1 Ver. : Intel(R) Boot Agent GE v1.2.19, PXE 2.1 Build 083(WfM 2.0) PXE 2 Ver. : Intel(R) Boot Agent FE v4.1.13, PXE 2.1 Build 083(WfM 2.0) SCSI Ver. : Adaptec* AIC-7901 B0 v4.30S2 (for SCSI/HostRAID) SATA Ver. : Adaptec* Embedded SATA HostRAID BIOS v2.2-14 Build 2204 VGA Ver. : ATI* RAGE* XL GR-xlamis3y.109-4.332 BIOS Base : AMIBIOS 8.00.10 Processor stepping(s) supported: Intel(R) Pentium(R) 4 Processors 2.53GHz, 2.6GHz, 2.8GHz, 3.0GHz, 3.2GHz, 3.4GHz, 3.6GHz (with FSB 533Mhz/800Mhz) Microcode update versions: CPUID Microcode update ID 0F0Ah 14(M04F0A14) 0F12h 2E(M04F122E) 0F13h 05(M04F1305) 0F24h 1E(M04F241E) 0F25h 1B(M04F251B) 0F27h 37(M04F2737) 0F29h 17(M04F2917) 0F33h 07(M0DF3307) 0F34H 0C(m1df340c) ============================================================================= SUPPORTED FUNCTIONALITY ============================================================================= 1. Four DIMMs DDR266/DDR333/DDR400. 2. Intel(R) Pentium(R) 4 processors with 533MHz/800MHz system bus speed. 3. Multi-boot support. 4. System Flash BIOS ROM 5. COMA/COMB port 6. CD-ROM boot 7. Floppy port 8. PCI 32-bit slot/PCI-X 64-bit slot 9. ATI* Rage* XL VGA 10. Serial ATA RAID 11. Adaptec* AIC-7901 Single channel U320 SCSI 12. Dual LAN (Intel(R) 82547GI PRO/1000 Ethernet Controller, Intel(R) 82551QM PRO/100 Ethernet Controller 13. Clear CMOS 14. Legacy Power button 15. ACPI S0/S1/S4/S5 16. Setup screen 17. Summary screen during POST 18. Legacy USB keyboard / mouse / Floppy / CDROM / HD 19. ARM (ATAPI Removable Media) / IRM (IDE Removable Media) 20. Wake on LAN/RTC 21. Custom CMOS save/restore 22. Console Redirection 23. NMI detection for PERR/SERR 24. Intel Platform Security 25. ACPI SPCR (Serial Port Console Redirection) 26. BIS (Boot Integrity Service) 27. Intel(R) Memory Test 28. Intel(R) Bootblock NVRAM Manager 29. Intel(R) Diagnostic LED 30. User Flash Binary ============================================================================= SYSTEM FIRMWARE REQUIREMENTS/REVISIONS ============================================================================= NS87431 mBMC FW : 2.30 or later FRU/SDR Package : 5.8.A or later ============================================================================= IMPORTANT INSTALLATION NOTES ============================================================================= IMPORTANT NOTES: >>> BOOTBLOCK CHANGED, PLEASE RUN FBB.BAT TO UPDATE BIOS <<< 1. Decompress BIOS.ZIP and extract files afudos.exe, f.bat, fbb.bat, and stpgw030.rom to a bootable 1.44MB floppy diskette. 2. Boot the system and press <F2> to run BIOS Setup Utility. 3. Record existing BIOS setting. (Important to document current BIOS settings, in the event the BIOS update restores any default settings) 4. Exit BIOS. 5. Place the bootable floppy containing the new BIOS into drive A: of the system, and boot to pure DOS mode. (non-HIMEM environment) NOTICE: If you are updating from BIOS revision P01 to this new BIOS revision, it is important to follow the Boot Block update instructions below. 6. Run f.bat or fbb.bat (depending if the bootblock needs to be updated) - f.bat : Updates system ROM only, but bootblock does not change. - fbb.bat : Updates both system ROM and bootblock. **NOTE** : If running fbb.bat, jumper J1D1 'BIOS FLASH WP' should set to pins 2-3 to enable bootblock write. Jumper J1D1 'BIOS FLASH WP' should be set back to pins 1-2 once update is complete. JUMPER BLOCK J1D1 LOCATIONS: +------------------------------------------------------------------+ | CMOS CLR PSWD CLR BIOS FLASH WP RVCR BOOT | | Jumper Pins -> O O O O O O O O O O O O | | Jumper # -> 1 2 3 1 2 3 1 2 3 1 2 3 | +------------------------------------------------------------------+ 7. If for any reason the FLASH process fails, please follow the BIOS Recovery Instructions at the end of this document to recover the system BIOS. NOTE: If after a BIOS update you encounter a CMOS checksum error. Reboot system and press <F2> to enter BIOS Setup utility. Check your settings, then save and exit Setup. ============================================================================= KNOWN ISSUES/WORKAROUNDS ============================================================================= Build 0029: - P03 - System will hang when USB hot plug in the legacy mode. ============================================================================= FEATURES ADDED ============================================================================= Build 0029: - P03 -Synchronize the password field in Custom CMOS area with that in CMOS every time the password is updated in Setup. -Update PXE ROM for 82547GI, 82541PI and 82551QM. (v1.2.19 for Gigabit, v4.1.13 for 10/100Mbps) -Update ISM_00_00_93 eModule. -Update Serial ATA OpROM to V2.2-14 2204. -Update microcode M1DF340C for Prescott D-0 stepping. -Set text color to RED for all error messages. Build 0026: - P02 - Add CD-ROM and LS-120 recovery support to bootblock - Update new e-module from AMI: 8.00.00_CPU-P4_3C.00. - Update ISM module to ISM_00_00_89. - Update AFUDOS to v1.32. Build 0025: - 2.00 RC02 - Add Post Error Code displaying for all POST Error message. - Update ISM module to ISM_00_00_87. - Update AFUDOS.EXE to v1.30 - Update new e-modules from AMI. 8.00.00_CPU-P4_3B.11. 8.00.10_USB2.23.02-SB-HRICH_004 8.00.10_SMI-3.11.00-NB-CTWD_02 Build 0024: - 2.00 RC01 - Update new module of ISM_086, OEMINT15_26, CUSTCMOS_14 - Set [User Flash] default to disabled - Update AFUDOS.EXE to v1.27. - Program ADT7463 Fan Controller for Prescott processor in SKU#4. - Modify [NMI Control] for SDR 0.50 Build 0026: - 15A.P.01.10 - Update AFUDOS.EXE to v1.32 Build 0021: - 15A.RC01 - Disable LAN Console Support by default - Add INT15 function DA8Ch support Build 0019: - 15A.B11 - Disable CMOS Layout Checksum - Force Clear Event Log from CMOS bit (Q_CLEAR_ALL_EVENT_LOG) Build 0016: - 15A.B08 - Hotkey messages on Logo Splash Screen - Forced Network Boot - Update PXE Boot process - 15A SLP Support added - Update BBS Popup Menu for no Valid Boot Device - Update CMOS Setup defaults and reserve all CMOS registers used. Build 0014: - 15A.B06 - Update OEM ID in BIOS ID string - Update POST Hotkey messages & default keys - Update CMOS Setup defaults - Update 15A Logo Screen - Update BBS Popup Menu - Update Default Boot order ============================================================================= ISSUES FIXED ============================================================================= Build 0030: - P03.10 -Defect #71454, Cherry Brand* (ML4400) Keyboard does not work with SE7210TP1-E unless NUMLOCK is off in BIOS. -Defect #71446, Torrey Pines Fails to Recognize Hard Drive During Cold/Hard Boot. Build 0029: - P03 -Defect #71449, Program ADT7463 Tmin value dynamically according to current PWMmin (offset 65h) and Trange (offset 5fh[7:4]) value. -Defect #71432, Load BIOS "Custom Defaults" after system loses battery power or CMOS checksum BAD. -Defect #71087, Floppy B appeared when install ASC-39320D-R and LSI20320 on slot under Win2003. -Fixed the CMOS checksum may be destroyed sometimes (very rare, corner case Core issue). -Fixed the CPU ratio field in [CPU Configuration] sub-menu will always display for a locked CPU. -Defect #71450, Modification for POST Error Pause - change Error type to ¡§INFORMAL/WARNING¡¨ for some error messages including the Error Type for ¡§System Event Log Full¡¨. -Fix use of WinXP FAT format for BIOS flash recovery from USB device. Build 0028: - P02.20 - Fixed defect#71447 Red Hat* 9.0 cannot boot with serial console redirection unless the VGA and Keyboard is connected. - Fixed defect#71440 System can not enter Intel(R) RAID Controller SRCZCR console (RAID option utility). Build 0027: - P02.10 - Update Serial ATA Option ROM to v2.2-14 Build 2202 Build 0026: - P02 - Defect #71414, Modify the error message from Thermal Trip failure to Thermal failure due to PROCHOT# to avoid confusion to users. - Defect #71421, wrong message for clear CMOS by jumper. - Fixed, Wrong message for clear password by jumper. - Update SATA OPROM v2.2-14 Build 1231. - Defect #71355, Workaround for some Adaptec* RAID cards can not enter RAID Option Utility. (ASR-2200S). SplitRom eModule fix. - Enhancement for FLASH routine (Program/Erase). - Fixed, INT19 retry fail if no bootable device in system. Build 0025: - 2.00 RC02 - Defect #71376, Enable bi-direction PROCHOT for all SKUs. - Defect #71394, System hangs when DOS network drivers loaded and Adaptec* RAID config utility is executed. - Defect #71386, Add support for displaying 15 Hard Drives in Setup. - Defect #71401, BIOS detects a Floppy Drive even when a Floppy Drive is not present. - Defect #71388, Add POST Error Message for PCI Option ROM not enough. - Defect #71404, System Management fields in BIOS Setup is blank even though FRU/SDR has been programmed. - Defect #71395, System hangs during POST with USB printer or keyboard attached. - Defect #71378, Set bit13 in bus 0, dev 1Eh, func 0 offset 50h. (will cause SelfTest v4.3.0 fail) Build 0024: - 2.00 RC01 - Defect #71365, Remove text of ¡¥DB-9¡¦ and ¡¥RJ-45¡¦ for options of [BIOS Redirection Port]. - Defect #71311, WOL test fail when no click APM and enable PME. - Defect #71364, Set BIOS default to enabled for PXE of both NICs. - Defect #71375, System cannot detect NIC-2(10/100) PXE Boot Agent during POST. - Defect #71384, Set Supervisor Password, <F1> key has no function when entering the wrong password three times. - Remove ¡¥P¡¦ character in BIOS Setup for production BIOS. Build 0028: - 15A.P.01.30 - Defect #71416, Set the correct data segment I19R_CSEG for BBS in order to resolve issue in which some data in I13R_CSEG was being destroyed unexpectedly and causing the INT13 function call 15h to fail. Build 0027: - 15A.P.01.20 - Defect #71437, Fix system hang when using DOS XCOPY or COPY of OS files from CD or Network with new SATA HostRAID OpROM build 2202 from Adaptec. Build 0026: - 15A.P.01.10 - Defect #71402, Remove the Secure Mode Boot Setup feature due to Winbond SuperIO limitation/incompatibility. - Defect #71407, Fix SATA RAID array imaging issue with new SATA HostRAID OpROM build 1231 from Adaptec. Build 0025: - 15A.P.01.00 - Defect #71395, Update to USB modules 8.00.04_USB-2.23.02 and 8.00.10_USB2.23.02-SB-HRICH_003, and modify USB_DATA_AREA_SIZE to fix USB Hub issue with USB 2.0 HiSpeed. - Defect #71404, Correct allocated buffer size for FRU data read from mBMC. Build 0024: - 15A.RC04 - Defect #71394, Fix dummy Interrupt Service Routine so that it will properly issue an end-of-interrupt comannd when no ISR (driver) can service the interrupt. - Defect #71395, Revert to USB modules 8.00.04_USB-2.23.01 and 8.00.09_USB2.23.00-SB-HRICH_002 to resolve initialization issue using USB keyboard with built-in hub when USB 2.0 Controller Mode option set to HiSpeed. Build 0023: - 15A.RC03 - Change setup option for Scan User Flash Area to Disabled by default. - Fix BIOS Setup key message so it will still be updated on splash screen for <F2> hotkey press when there is a CMOS error. Build 0020: - 15A.B12 - Fix BBS Popup key detect and popup boot hotkey message update. ============================================================================= BIOS RECOVERY INSTRUCTIONS ============================================================================= - Build Recovery Diskette 1. Prepare a formatted floppy diskette. 2. Copy AMIBOOT.ROM to it. - Execute BIOS Recovery 1. User Forced Recovery - set Recovery Boot Jumper J1D1 'RCVR BOOT' to pin(2-3) - Insert the Recovery diskette into floppy drive - Power on system - System boot and the screen will display the flash progress. - When flash complete, power off system and set jumper back to Normal mode J1D1 'RCVR BOOT' pin(1-2) short. JUMPER BLOCK J1D1 LOCATIONS: +------------------------------------------------------------------+ | CMOS CLR PSWD CLR BIOS FLASH WP RVCR BOOT | | Jumper Pins -> O O O O O O O O O O O O | | Jumper # -> 1 2 3 1 2 3 1 2 3 1 2 3 | +------------------------------------------------------------------+ 2. Auto Recovery - If system ROM is damaged (checksum BAD), system will perform BIOS recovery automatically. [END OF RELEASE NOTES]Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.