Hardware specifications v1.02 Specifications for Intel's EtherExpress(TM) PRO/100B adapter ============================================================ System compatibility -------------------- PCI systems Media (Cable) connectors and wiring ----------------------------------- RJ45 Use Category 5 cabling at 100 Mbps for TX Use Category 3, 4, 5 cabling at 100 Mbps for T4 TX model supports 100BASE TX Fast Ethernet standard T4 model supports 100BASE T4 Fast Ethernet standard Data Rate mode -------------- 10 or 100 Mbps Interrupt levels ---------------- PCI: INTA SRAM Transmit/Receive Buffer ---------------------------- 16 Kbytes Power requirements ------------------ 0.9 Watts @ +5 VDC Isolation voltage ----------------- 200V RMS Operating temperature --------------------- 0 - 55 degrees C Humidity -------- 10% - 90% non-condensing Diagnostic LED -------------- Activity and Link 100 Mbps Diagnostic software ------------------- On-board On-network Responder * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.