LSI Logic MegaRAID Firmware Release ************************************ OEM Name: LSI Controllers Supported: MegaRAID SCSI 320-1 / MegaRAID SCSI 320-2 Release date: 07/20/2004 New Release Version: 1L33 BIOS Version: G118 Ctrl+M Version: U821 Boot Block Version: 1.7.6 LSI MPT SCSI firmware: 01.03.06.00-IT WebBIOS: 1.90 WebBIOS Interface Engine: V2.30 Controllers Supported: ===================== MegaRAID SCSI 320-1 (520) MegaRAID SCSI 320-2 (518) Installation: ====================== Note: You must make sure you are flashing this firmware to a MegaRAID SCSI 320-1/320-2 Controller from LSI Logic Corporation. Boot to an MS-DOS command prompt, and then type MFLASH. Your MegaRAID Controller should be detected and you are prompted to continue with the flash utility. Do not reboot your system until the flash process is complete.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.