Gateway, Inc.
DATE: February 22, 2005
SUBJECT: FRU/SDR & BMC Configuration Release Note JR-6.6.2
** This FRUSDR update requires that the based platform have the
following System software installed prior to running this FRUSDR release.
- mBMC firmware is 2.40 (or later)
- IMM (Professional and Advanced) BMC firmware is 0.23 (or later)
- HSC firmware for the SCSI backplane is 1.06 or later
- HSC firmware for the SATA backplane is 1.08 or later
Failure to load the listed system software before running this FRUSDR package
may render your system inoperable.
INSTALLATION PROCEDURE
The FRUSDR Loader is meant to be used as an MS-DOS application on a server.
The utility should be placed onto a bootable MS-DOS media and the system rebooted
prior to and after using. Running the utility in a Window's MS-DOS box is not
supported and will provide incorrect results.
1. Extract the contents of 9532011.zip.
2. Copy the extracted files to either a floppy disk, USB flash drive, or CD.
3. Boot the system to an MS-DOS prompt either using a floppy disk, bootable CD, or USB flash drive.
4. Execute run.bat. The flash runs automatically.
5. When completed, restart the server for normal operation.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.