Stingray Flash BIOS -02 FLASHING THE BIOS 1. Format a blank floppy disk with system files, so that it is bootable. There should be no CONFIG.SYS and AUTOEXEC.BAT files on the disk. 2. Copy the AWDFLASH.EXE and STI-V02.BIN files to the floppy disk. 3. Boot your system off the floppy disk. 4. At the prompt, type AWDFLASH STI-V02.BIN then press the [ENTER] key. That's it. Also, it is normally a good idea to clear the CMOS after flashing to be sure that any older settings are cleared out. You can then setup the new BIOS as you would like to.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.