**
**
** VIA Rhine Family Fast Ethernet Adapter
**
** PXE BOOTROM for Netware and Windows NT
**
** v2.20 Jan , 2003
**
**
Introduction:
=============
This document shows you how to install PXE Bootrom for PCI ethernet adapter
in Windows NT Server 3.5, 3.51, 4.0.
Contents of the Subdirectory:
=============================
PXE.TXT This file.
PXE.LOM The bootrom binary file for Lan On Motherboard.
PXE.NIC The bootrom binary file for Network Interface Card.
Installation:
=============
Before starting the installation process, make sure that the adapter
is properly installed and configured. You can use the diagnostic program
(A:\SETUP.EXE) to make sure your connection with the network is correct.
This is for network boot by using PnP/BEV (BBS). Whether to boot or not
according IPL priority. The proiority for IPL devices is configurable by
the user by editing the IPL Priority in BIOS setup.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.