Configuration Diskette Procedure:
1. Create a BOOTABLE diskette from the file 9507067.ZIP.
Label it as show below:
Gateway 7210 Server
BIOS Disk
Configuration Disk 1 (of 3)
2. Create a BOOTABLE diskette from the file 9506915.ZIP.
Label it as show below:
Gateway 7210 Server
FIRMWARE Disk
Configuration Disk 2 (of 3)
3. Create a BOOTABLE diskette from the file 9507088.ZIP.
Label it as show below:
Gateway 7210 Server
FRUSDR Disk
Configuration Disk 3 (of 3)
4. Boot the target system from Disk 1.
5. Turn the target system off when prompted.
6. Boot the target system from Disk 2.
7. Turn the target system off when prompted.
8. Boot the target system from Disk 3.
9. Turn the target system off when prompted.
10. Turn on the machine and go into BIOS setup:
Load System Defaults [F9]
Set the Date and Time (if Necessary)
Set Processor Retest to [Yes]
Set Reset Configuration Data to [Yes]
Set Clear Event Log to [Yes]
11. Save the settings to CMOS.
12. Turn the target sytem off.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.