; /****************************************************************************
; ** COPYRIGHT (C) 1994-1999 INTEL CORPORATION **
; ** HTTP://WWW.INTEL.COM/ **
; ** THIS FILE IS PART OF THE INTEL USB CABLE MODEM REFERENCE DESIGN **
; ****************************************************************************/
[version]
Signature = "$Chicago$"
Class = Net
ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318}
Provider = %OEM%
;LayoutFile = layout.inf ; Only for drivers distributed with windows
CatalogFile = netrcacm.cat ; File holds digital signature.
DriverVer=11/26/2001,30.2.19.0
Compatible = 1 ; works with Win2K and Win9x
[Manufacturer]
%V_MANUFACTURER% = Rca
[Rca]
;
; Display Name Section DeviceID
;_________________________________________________________________
%netrcacm.DeviceDesc% = netrcacm.ndi, USB\VID_069B&PID_0704
[SourceDisksNames]
1=%INSTALLDISK%,,
;1=%INSTALLDISK%,"2_17_0",0
[SourceDisksFiles]
netrcacm.sys=1
[ControlFlags]
;
; Provides limited control on UI displays and events during installation.
; Must for any device on an enumerable BUS like USB
;
ExcludeFromSelect = USB\VID_069B&PID_0704
;
; Windows 98 specific entry
;
[netrcacm.ndi]
CopyFiles = netrcacm.9x.CopyFiles
AddReg = netrcacm.id.reg, netrcacm.9x.reg, common.reg
DeviceID = "USB\VID_069B&PID_0704"
DriverVer=11/26/2001,30.2.19.0
;
; Windows 2000 specific entry
;
[netrcacm.ndi.NT]
Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI ??
BusType = 15 ; (was PCI == 5), PnpBus == 15
AddReg = common.reg, netrcacm.nt.reg ;
CopyFiles = netrcacm.nt.CopyFiles ;
DriverVer=11/26/2001,30.2.19.0
[netrcacm.ndi.nt.Services]
AddService = netrcacm, 2, netrcacm.Service, common.EventLog
;----------------------------------------------------------------------------
; Win9x id registry sections
; These are not needed by NT
;
[netrcacm.id.reg]
HKR, Ndi, DeviceID, 0, "USB\VID_069B&PID_0704"
;-----------------------------------------------------------------------------
; common registry entries
;
[common.reg]
HKR, NDI\params\ByteSwapFlag, ParamDesc, 0, "Byte Swap Flag"
HKR, NDI\params\ByteSwapFlag, default, 0, "ByteSwapFlag=0"
HKR, NDI\params\ByteSwapFlag, type, 0, "edit"
HKR, NDI\params\ByteSwapFlag, LimitText, 0, "128"
HKR, NDI\params\ByteSwapFlag, UpperCase, 0, "0"
HKR, NDI\params\ByteSwapFlag, flag, 1, "20","00","00","00"
;-----------------------------------------------------------------------------
; WIN2K (NT) specific
;
[netrcacm.nt.reg]
HKR, Ndi, Service, 0, "netrcacm"
; use ndis5 as the upper bound because NT supports it
HKR, Ndi\Interfaces, UpperRange, 0, "ndis5"
HKR, Ndi\Interfaces, LowerRange, 0, "ethernet"
[netrcacm.Service]
DisplayName = %netrcacm.Service.DispName%
ServiceType = 1 ;%SERVICE_KERNEL_DRIVER%
StartType = 3 ;%SERVICE_DEMAND_START%
ErrorControl = 1 ;%SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\netrcacm.sys
LoadOrderGroup = NDIS
AddReg = TextModeFlags.reg
[common.EventLog]
AddReg = common.AddEventLog.reg
[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported, 0x00010001, "7"
[TextModeFlags.reg]
HKR, , TextModeFlags, 0x00010001, "0x0001"
;----------------------------------------------------------------------------
; Win9x specific
;
[netrcacm.9x.reg]
HKR, , DevLoader, 0, "*ndis"
HKR, , DeviceVxDs, 0, "netrcacm.sys"
HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages"
; memphis appears to not support the ndis5 upper range, so use ndis3
HKR, Ndi\Interfaces,DefUpper, 0, "ndis3"
HKR, Ndi\Interfaces,DefLower, 0, "ethernet"
HKR, Ndi\Interfaces,UpperRange, 0, "ndis3"
HKR, Ndi\Interfaces,LowerRange, 0, "ethernet"
HKR, NDIS, LogDriverName, 0, "netrcacm"
HKR, NDIS, MajorNdisVersion, 1, "03"
HKR, NDIS, MinorNdisVersion, 1, "0A"
HKR, Ndi\Install, ndis3, 0, "netrcacm.install"
[netrcacm.install]
;CopyFiles = netrcacm.9x.CopyFiles
;-----------------------------------------------------------------------------
; DestinationDirs
;
[netrcacm.nt.CopyFiles]
netrcacm.sys,,,2
[netrcacm.9x.CopyFiles]
netrcacm.sys,,,2
[DestinationDirs]
DefaultDestDir = 10,system32\drivers ; manditory dest for all wdm drivers?
netrcacm.nt.CopyFiles = 12
netrcacm.9x.CopyFiles = 11
[Strings]
OEM = "RCA"
V_MANUFACTURER = "Thomson Consumer Electronics"
;
; String that gets displayed while installing the device
;
netrcacm.DeviceDesc = "RCA USB Cable Modem"
INSTALLDISK = "Install Disk"
;
; NT Service name
;
netrcacm.Service.DispName = "RCA USB based Digital Cable Modem Win2000 Driver"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.