;/*************************************************************************\ ; ** Copyright(C) 1997-2001 Motorola. All rights reserved. ** ; ** http://www.motorola.com ** ; ** This is the installation file for the Motorola USB Cable Modem ** ; ** ** ;\*************************************************************************/ [version] Signature = "$Chicago$" Class = Net ClassGUID = {4d36e972-e325-11ce-bfc1-08002be10318} Provider = %MOT% Compatible = 1 ; works with Win2K and Win9x CatalogFile = netmotcm.cat ;LayoutFile = layout.inf DriverVer=11/05/2001, 2.1.0.0 [Manufacturer] %MOT% = MOTOROLA [ControlFlags] ; Provides limited control on UI displays and events during installation. ; Must for any device on an enumerable BUS like USB ; Each PNP device should be included in this list ExcludeFromSelect = USB\VID_07B2&PID_4100 ExcludeFromSelect = USB\VID_07B2&PID_4200 ExcludeFromSelect = USB\VID_07B2&PID_4210 [MOTOROLA] ;Models section - has an entry for each device installed by this file ; ; Display Name Section DeviceID ;_________________________________________________________________ ;%ndiscm.DeviceDesc% = ndiscm.ndi, USB\VID_07B2&PID_4100 ;%ndiscm.DeviceDesc% = ndiscm.ndi, USB\VID_07B2&PID_4200 ; Display Name Section DeviceID ;_________________________________________________________________ %USB\VID_07B2&PID_4100.DeviceDesc% = ndisSB410.ndi, USB\VID_07B2&PID_4100 %USB\VID_07B2&PID_4200.DeviceDesc% = ndisSB420.ndi, USB\VID_07B2&PID_4200 %USB\VID_07B2&PID_4210.DeviceDesc% = ndisSB421.ndi, USB\VID_07B2&PID_4210 ;---------------------------------------------------------------------------- ; Motorola SB4100 USB Cable Modem ; [ndisSB410.ndi] ; Windows 98 specific entry AddReg = ndisSB410.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg DeviceID = "USB\VID_07B2&PID_4100" CopyFiles = ndiscm.9x.CopyFiles ;LogConfig = DefaultConfig [ndisSB410.ndi.NT] ; Windows 2000 specific entry Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI BusType = 15 ; USB, or any other PNP bus AddReg = common.reg, ndiscm.nt.reg ; CopyFiles = ndiscm.nt.CopyFiles ; [ndisSB410.ndi.nt.Services] ; Windows 2000 specific entry AddService = ndiscm, 2, ndiscm.Service, common.EventLog [ndisSB410.id.reg] ; Win9x id registry sections ; These are not needed by NT HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_4100" ;---------------------------------------------------------------------------- ; Motorola SB4200 USB Cable Modem ; [ndisSB420.ndi] ; Windows 98 specific entry AddReg = ndisSB420.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg DeviceID = "USB\VID_07B2&PID_4200" CopyFiles = ndiscm.9x.CopyFiles ;LogConfig = DefaultConfig [ndisSB420.ndi.NT] ; Windows 2000 specific entry Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI BusType = 15 ; USB, or any other PNP bus AddReg = common.reg, ndiscm.nt.reg ; CopyFiles = ndiscm.nt.CopyFiles ; [ndisSB420.ndi.nt.Services] ; Windows 2000 specific entry AddService = ndiscm, 2, ndiscm.Service, common.EventLog [ndisSB420.id.reg] ; Win9x id registry sections ; These are not needed by NT HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_4200" ;---------------------------------------------------------------------------- ; Motorola SB4210 USB Cable Modem ; [ndisSB421.ndi] ; Windows 98 specific entry AddReg = ndisSB421.id.reg, common.reg, ndiscm.flag.reg, ndiscm.9x.reg DeviceID = "USB\VID_07B2&PID_4210" CopyFiles = ndiscm.9x.CopyFiles ;LogConfig = DefaultConfig [ndisSB421.ndi.NT] ; Windows 2000 specific entry Characteristics = 0x84 ; NCF_PHYSICAL | NCF_HAS_UI BusType = 15 ; USB, or any other PNP bus AddReg = common.reg, ndiscm.nt.reg ; CopyFiles = ndiscm.nt.CopyFiles ; [ndisSB421.ndi.nt.Services] ; Windows 2000 specific entry AddService = ndiscm, 2, ndiscm.Service, common.EventLog [ndisSB421.id.reg] ; Win9x id registry sections ; These are not needed by NT HKR, Ndi, DeviceID, 0, "USB\VID_07B2&PID_4210" ;----------------------------------------------------------------------------- ; common registry entries ; [common.reg] HKR, Ndi\params\ByteSwapFlag, ParamDesc, 0, "Byte Swap Flag" HKR, Ndi\params\ByteSwapFlag, default, 0, "ByteSwapFlag=0" HKR, Ndi\params\ByteSwapFlag, type, 0, "edit" HKR, Ndi\params\ByteSwapFlag, LimitText, 0, "128" HKR, Ndi\params\ByteSwapFlag, UpperCase, 0, "0" ;----------------------------------------------------------------------------- ; WIN2K (NT) specific ; [ndiscm.nt.reg] HKR, Ndi, Service, 0, "ndiscm" ; use ndis5 as the upper bound because NT supports it HKR, Ndi\Interfaces, UpperRange, 0, "ndis5" HKR, Ndi\Interfaces, LowerRange, 0, "ethernet" [ndiscm.Service] DisplayName = %ndiscm.Service.DispName% ServiceType = 1 ;%SERVICE_KERNEL_DRIVER% StartType = 3 ;%SERVICE_DEMAND_START% ErrorControl = 1 ;%SERVICE_ERROR_NORMAL% ServiceBinary = %12%\NetMotCM.sys LoadOrderGroup = NDIS AddReg = TextModeFlags.reg [common.EventLog] AddReg = common.AddEventLog.reg [common.AddEventLog.reg] HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll" HKR, , TypesSupported, 0x00010001, 7 [TextModeFlags.reg] HKR, , TextModeFlags, 0x00010001, 0x0001 ;---------------------------------------------------------------------------- ; Win9x specific ; [ndiscm.flag.reg] ; flag is not needed by NT HKR, Ndi\params\ByteSwapFlag, flag, 1, 20,00,00,00 [ndiscm.9x.reg] HKR, , DevLoader, 0, "*ndis" HKR, , DeviceVxDs, 0, "netmotcm.sys" HKR, , EnumPropPages, 0, "netdi.dll,EnumPropPages" ; memphis appears to not support the ndis5 upper range, so use ndis3 HKR, Ndi\Interfaces,DefUpper, 0, "ndis3" HKR, Ndi\Interfaces,DefLower, 0, "ethernet" HKR, Ndi\Interfaces,UpperRange, 0, "ndis3" HKR, Ndi\Interfaces,LowerRange, 0, "ethernet" HKR, NDIS, LogDriverName, 0, "NetMotCM" HKR, NDIS, MajorNdisVersion, 1, 03 HKR, NDIS, MinorNdisVersion, 1, 0A ; this installs the driver only if ndis3 exists ;HKR, Ndi\Install, ndis3, 0, "ndiscm.install" ;[ndiscm.install] ;CopyFiles = ndiscm.9x.CopyFiles ;----------------------------------------------------------------------------- ; Files and Destination Directories ; [ndiscm.nt.CopyFiles] netmotcm.sys,,,2 [ndiscm.9x.CopyFiles] netmotcm.sys,,,2 [DestinationDirs] ndiscm.nt.CopyFiles = 12 ndiscm.9x.CopyFiles = 11 [SourceDisksNames] 1 = %USBCM%,,, ;1 = %USBCM%,netmotcm.sys,, [SourceDisksFiles] netmotcm.sys = 1 [Strings] MOT = "Motorola" USBCM = "USBCM" ; String that gets displayed while installing the device ; ndiscm.DeviceDesc = "Motorola SurfBoard USB Cable Modem" USB\VID_07B2&PID_4100.DeviceDesc = "Motorola SurfBoard 4100 USB Cable Modem" USB\VID_07B2&PID_4200.DeviceDesc = "Motorola SurfBoard 4200 USB Cable Modem" USB\VID_07B2&PID_4210.DeviceDesc = "Motorola SurfBoard 4210 USB Cable Modem" ; NT Service name ndiscm.Service.DispName = "Motorola SurfBoard USB Cable Modem Windows 2000 Driver"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.