READ ME for
Cornerstone Monitor
Inf file for Windows 95
Release 1.01
Inf Installation Instructions
Cornerstone Imaging Customer Support
Hardware Support
----------------
This Inf file supports the following Cornerstone displays:
50/115sf, P1600, 50/115 P1400
50/101sf, 21/81 P1500
45/101sf P1700
50/95, C1000, C1001 C900
40/95 V300
20/70
20/77
21/75
Inf Installation Instructions
=============================
Installation
------------
First determine which version of Windows 95 you are using.
To do this, place your mouse cursor over the "My Computer"
icon and perform a right click. From the list, select
properties. Look at the "General" tab. You should see
System:
Microsoft Windows 95
4.00.95xx
Look at the line that starts with 4.00. If your system
reports either 4.00.950 or 4.00.950a then proceed to
section 1.
If your system reports 4.00.950b proceed to section 2.
SECTION 1 -- Installing In Windows 95, (Classic)
=================================================
NOTE: Be sure to exit all applications before starting
the setup.
1. Begin by going to your Display Properties Page. You
can do this by right clicking on your desktop &
selecting Properties or by going to the Control Panel
& Double Clicking on the Display icon.
2. Go to the Settings tab.
3. Click the Change Display Type button.
4. In the Change Display Type Window, click the Change
button to the right of the Monitor Type Field.
5. In the Select Device Window, click the Have Disk
button.
6. Supply the location of Crnmon.inf file & click ok.
The default location is A:\. If you have copied the
file to a different drive, type the location in the
"Copy manufacturers files from" field.
7. From the list choose the appropriate Cornerstone
Monitor and click ok.
8. Once your selection appears in the Change Display
Type Window, click on close.
9. Follow the Onscreen prompts.
10. Adjust your monitor as needed. Consult your
Cornerstone Display Manual For further
information on adjusting screen size &
position.
SECTION 2 -- Installing In Windows 95, (OSR2)
=============================================
NOTE: Be sure to exit all applications before starting
the setup.
1. Begin by going to your Display Properties Page. You
can do this by right clicking on your desktop &
selecting Properties or by going to the Control Panel
& Double Clicking on the Display icon.
2. Go to the Settings tab.
3. Click the Advanced Properties button.
4. Click on the Monitor tab.
5. Click on the Change button.
6. In the Select Device Window, click the Have Disk
button.
7. Supply the location of Crnmon.inf file & click ok.
The default location is A:\. If you have copied the
file to a different drive, type the location in the
"Copy manufacturers files from" field.
8. From the list choose the appropriate Cornerstone
Monitor and click ok.
9. Once your selection appears in the Advanced Display
Properties Window, click on Ok.
10. Follow the Onscreen prompts.
11. Adjust your monitor as needed. Consult your
Cornerstone Display Manual For further
information on adjusting screen size &
position.
Cornerstone Imaging Customer Support
====================================
If you need technical assistance please contact Cornerstone
Imaging Customer Support at the following numbers:
BBS: 1 408 435 8943
Email: support@corimage.com
Customer Support in USA: 1 800 562 2552
Technical Support in USA: 1 888 338 6490
Headquarters in USA: 1 408 435 8900
Fax: 1 408 435 8998
Technical Support in Europe: +49 89 500 65 99
European Headquarters: +49 89 500 65 0
Fax in Europe: +49 89 500 65 65
BBS in Europe: +49 89 500 65 50
WWW Home Page: http://www.corimage.com
All Trademarks are property of their respective owners.
Microsoft Windows, and Internet Explorer is a trademark of
the Microsoft Corporation. Copyright (C), Cornerstone Imaging,
Inc., 1991, 1997.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.