README.TXT Driver File Contents (2000PX.EXE)

   Windows for Workgroups v3.11

   Introduction:
   -------------
   This document describes the  procedure to  install  Microsoft  Windows
   for Workgroups v3.11 driver  for ISA Plug&Play  ethernet  adapter.

   LOCATION OF DRIVER:     \WFW311\PNPND.386


   Setup Procedure:
   ----------------
      After you run into Windows for Workgroup 3.11:

      1. Select the "Network Setup" icon in the Network Group.

      2. Click on the "Drivers..." button.

      3. If you are replacing a previous LAN adapter, select the Remove
         button to delete that adapter.

      4. Click on the "Add Adapter" button.

      5. Choose Unlisted or Updated Network Adapter.

      6. Insert the adapter driver disk in drive A and specify the path
         A:\WFW311 for the location of the driver.

      7. Close the windows and restart your computer so that changes can
         take effect.


   NOTES:
   ------
      1. Parameters for the PROTOCOL.INI file:

         AdapterID : This  keyword is provided by PNPND, and is required
                     when  more  than  one  ethernet  adapters exist in a
                     system.

      2. Installing Multiple LAN Adapters:
         There are two different method to complete the installation:
         (a) Under  DOS  mode, you can modify the AdapterID in file
             C:\WFW311\PROTOCOL.INI by yourself.
         (b) Or you can enter Windows for WorkGroup and follow the above
             setup procedurc, then click on "Setup" button. select the
             "Advanced" button and enter the AdapterID in Value item.
             select OK and close NETWORK SETUP.

      3. Sample PROTOCOL.INI:
         Windows for Workgroups creates the PROTOCOL.INI for you.  This is
         provided for reference.  This is a sample with Microsoft Netbeui
         and IPX/SPX Compatible Transport with Netbios.

         [network.setup]
         version=0x3110
         netcard=ISAPNP,1,ISAPNP,3
         transport=ms$nwlinknb,NWLINK
         transport=ms$ndishlp,MS$NDISHLP
         transport=ms$netbeui,NETBEUI
         lana0=ISAPNP,1,ms$netbeui
         lana1=ISAPNP,1,ms$nwlinknb
         lana2=ISAPNP,1,ms$ndishlp


         [protman]
         DriverName=PROTMAN$
         PRIORITY=MS$NDISHLP

         [ISAPNP]
         DriverName=PNPND$
         AdapterID=@0000B4123456

         [PNPNDIS]
         Adapters=ISAPNP

         [NWLINK]
         BINDINGS=ISAPNP

         [MS$NDISHLP]
         DriverName=ndishlp$
         BINDINGS=ISAPNP

         [NETBEUI]
         DriverName=netbeui$
         SESSIONS=10
         NCBS=12
         BINDINGS=ISAPNP
         LANABASE=0

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.65