1. 2000PX.EXE Driver
2. README.TXT File Contents

README.TXT Driver File Contents (2000PX.EXE)

   Windows for Workgroups v3.10

   Introduction:
   -------------
   This document describes the	procedure to  install  Microsoft  Windows
   for Workgroups v3.10 driver for ISA Plug&Play  ethernet  adapter.  

   Location of Driver:	   \NDIS\PNPND.DOS


   Sample Configuration Files:
   ---------------------------
      AUTOEXEC.BAT
	C:\WINDOWS\NET START
    *** C:\WINDOWS\MSIPX	       (Added if running NetWare)
    *** C:\WINDOWS\NETX 	       (Added if running NetWare)


      CONFIG.SYS (install will add these lines)

	 DEVICE=C:\WINDOWS\PROTMAN.DOS /I:C:\WINDOWS
	 REM	For Normal Driver
  DEVICE=C:\WINDOWS\PNPND.DOS       ***


    ***  DEVICE=C:\WINDOWS\MSIPX.SYS   (Added if running NetWare)
	 DEVICE=C:\WINDOWS\WORKGRP.SYS
	 LASTDRIVE=P


      PROTOCOL.INI (install creates this file)	(For normal driver)

	[network.setup]
	version=0x3100
	netcard=ISAPNP,1,ISAPNP 				   ***
	transport=ms$netbeui,MS$NETBEUI
   ***	transport=ms$ipx,MS$IPX        (Added if running NetWare)
	lana0=ISAPNP,1,ms$netbeui				   ***
   ***	lana0=ISAPNP,1,ms$ipx	       (Added if running NetWare)  ***

	[protman]
	DriverName=PROTMAN$
	PRIORITY=MS$NETBEUI

	[ISAPNP]						   ***
 DriverName=PNPND$        ***
	Adapters=ISAPNP 					   ***
	AdapterID=@0000B4123456

	[MS$NETBEUI]
	DriverName=netbeui$
	SESSIONS=10
	NCBS=32
	BINDINGS=ISAPNP 					   ***
	LANABASE=0

   ***	[MS$IPX]		       (Added if running NetWare)
   ***	Drivername=IPX$ 	       (Added if running NetWare)
   ***	MediaType=Novell/Ethernet      (Added if running NetWare)
   ***	Bindings=ISAPNP 	       (Added if running NetWare)  ***




      New Windows for Workgroups Installation:
      ----------------------------------------

      1. When installing Windows for Workgroups, you are prompted for a
         network driver.  Select the "Unlisted or Updated Network Driver".

      2. Insert the ethernet adapter driver disk containing OEMSETUP.INF
         and PNPND.DOS files.

      3. Specify the directory for the driver (A:\WFW31) and select the
         ISA PNP Adapter driver.

      4. Select Advanced options, and make sure the parameters match the
         card settings.  Check keyword "AdapterID" which is provided by
         PNPND.DOS. The installation program copies the necessary files
         and creates PROTOCOL.INI for use with the adapter.

      5. Continue the installation per Windows for Workgroups instructions.


      Existing Windows for Workgroups Installation:

      1. Select the "Control Panel" icon in the Main Group.

      2. Select the "Network" icon.

      3. Select the "Adapters" button.

      4. Select the Add option.

      5. Select "Unlisted or Updated Network Adapter"

      6. Insert the adapter driver disk with OEMSETUP.INF and PNPND.DOS
         and specify the path A:\WFW31.

      7. Select the ISA PNP adapter driver.

      8. The installation program copies the necessary files and
         creates PROTOCOL.INI for use with the adapter.

      9. Select "Close" and when prompted, restart computer for changes to
         take effect and complete the installation.


      NOTE:  You must have a terminated cable attached to the adapter
	     when you start Windows for Workgroups.  If you don't, Windows
	     for Workgroups hangs.

   TO ADD NETWARE:
   ---------------
      1. Select the "Control Panel" icon in the Main Group.

      2. Select the "Network" icon.

      3. Select the "Networks" button.

      4. Select "Novell NetWare" and select the add button.

      5. Select "OK" and close the Network icon.

      6. Select reboot computer and restart Windows.

   NOTES:
   ------
      1. Parameters for the PROTOCOL.INI file:

  AdapterID : This keyword is provided by PNPND, and is
              required when  more  than one  ISA PNP adapters
              exist on one system.

      2. Installing Multiple LAN Adapters:
         There are two different method to complete it:
         (a) Under  DOS  mode, you can modify the AdapterID in file
             C:\WFW31\PROTOCOL.INI by yourself.

         (b) Or you can enter Windows for WorkGroup and follow above
             setup procedurc step 2,then click on "Setup.." button,
             select "Advanced...", fill AdapterID in Value item.
             Last step to select OK and close NETWORK SETUP.