Ether Support Publishing \NT\NT40.TXT
Ether SN2000 Ethernet Adapter Installation
for Windows NT 4.0
Getting Started
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Start your Windows NT 4.0 PC normally and inserting the adapter
into your computer.
Open "My Computer" -> "Control Panel" -> "Networks" icons.
Select "adapter" -> "add" -> "Have disk" items.
Type the following (assume the driver is located at C:\NT40)
C:\NT40
Windows NT 4.0 will copy the driver files from the release driver disk.
It also will pop up the configuration window, you can assign the
"Connection Type" and "Network Address" here.
After finishing file copy, Windows NT 4.0 will ask you to reboot the PC.
Select YES.
Restart the computer.
Driver keywords:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Open "My Computer" -> "Control Pannel" -> "Network" ->
Network Address You can set the Ethernet address for your adapter.
It is not recommended to use this keyword. Please
use default value if possible.
As you know two or more adapter in the same network
with same Ethernet address will cause a little
poblem.
When using this keyword you need to input exactly
6 bytes of Ethernet address using one of the
following format:
xx-xx-xx-xx-xx-xx
OR
xxxxxxxxxxxx
Default: read address from adapter ROM.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.