3Com (R) Corporation EtherDisk (R) Diskette for the 3C90x EtherLink 10/100 PCI NIC Family Installing a NIC for NetWare in Windows for Workgroups 3.11 -------------------------------------------------------------------------- IMPORTANT: You must have software from Novell or a version of Windows for Workgroups with NetWare support in order to install NetWare support for Windows for Workgroups. For full NetWare support with Windows for Workgroups, use the NetWare installation diskettes provided by Novell. The installation program will prompt you for the necessary files from the 3Com EtherDisk diskettes. To install an EtherLink NIC in a NetWare client running Windows for Workgroups 3.11 WITHOUT the Novell installation diskettes: 1. Make sure that the NIC has been configured properly in the PC by reviewing the configuration and diagnostic tests. 2. Use the ComsLink program to install the NetWare ODI client software in DOS. For instructions, refer to the user guide or run the HELP.EXE file on EtherDisk diskette 3. 3. In Windows for Workgroups, locate the Network section (the Network icon). Open the Network group and double-click Network Setup. 4. Click on Networks in the Network Setup window. To install the Microsoft Network with NetWare: a. Choose Install Microsoft Windows Network. b. Select Other. c. Choose either Novell NetWare[Workstation Shell 3.X] or Novell NetWare[Workstation Shell 4.0 and above] from the pull-down menu. Shell 3.X is used for NETX.EXE and Shell 4.0 is for the VLM requester. d. Click OK when you are finished. e. Continue at step 5. To install Novell NetWare only: a. Choose Install Windows Support for the following network only: b. Choose either Novell NetWare[Workstation Shell 3.X] or Novell NetWare[Workstation Shell 4.0 and above] from the pull-down menu. Shell 3.X is used for NETX.EXE and Shell 4.0 is for the VLM requester. c. Continue at step 14. 5. To install the network NIC, click Drivers. 6. In the Network Drivers window, click Add adapter. 7. From the list of network NICs, select Unlisted or Updated Network Adapter, and then click OK. 8. Network setup now requires the vendor-provided network driver diskette. Insert the EtherDisk diskette 2 in drive A: and type the following path for the location of the NDIS driver: A:\WFW311 Click OK. 9. From the Unlisted or Updated Network Adapter screen, select the 3Com EtherLink NIC, and then click OK. The Network Setup screen now lists the adapter, along with the default protocol stacks: 3Com EtherLink NIC (NDIS2/NDIS3) IPX/SPX Compatible Transport with NetBIOS Microsoft NetBEUI 10. Click setup in the Network Drivers window. 11. Click the down arrow under Driver Type and select the ODI driver, and then click OK. 12. Click Close in the Network Drivers window to accept these settings. 13. Click OK in the Network Setup window to start the installation. 14. Windows for Workgroups may give you a chance to add or change your user name, workgroup, and computer name. If your network administrator supplies you this information, use it. If not, you can create this information yourself. When you have finished, click OK. NOTE: It may be necessary to use your Novell or Windows for Workgroups network support diskettes during the installation. Later versions of NetWare include a file that Windows for Workgroups will not copy for you. If you get an error stating that NWGDI.DLL is missing, you must copy the file manually into the SYSTEM subdirectory of your WINDOWS directory. 15. The Windows Setup program may ask if you want to replace the Enhanced Mode Protocol Manager or your Novell NetWare files with the version you are installing now. Click Yes to All. 16. If the Windows Setup program asks for the NDIS.386 file, insert Microsoft Windows for Workgroups 3.11 Disk 7 and click OK. 17. If prompted for the EL90X.386 driver, insert the 3Com EtherDisk diskette 2 in the A:\ drive. Type the following path to load the NDIS 3 driver: A:\WFW311 Click OK. 18. If prompted for the EL90X.DOS driver, insert the 3Com EtherDisk diskette 3 in the A:\ drive. Type the following path to load the NDIS 2 driver: A:\NDIS2\DOS Click OK. 19. The PROTOCOL.INI and SYSTEM.INI files have now been modified. Windows for Workgroups saves the old versions with the extension .001, where the number is incremented every time a new version of the file is generated. Click OK. 20. When prompted, restart the computer. (%VER WFWNETWR.TXT - NetWare installation for WFW 3.11 - V4.0.2)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.