1. Win2k_XP_v2.0.0919_370.zip Driver
2. Hpt3xx.inf File Contents

Hpt3xx.inf Driver File Contents (Win2k_XP_v2.0.0919_370.zip)

;
; HPT3XX.INF
;
; INF file of HPT370/372 IDE RAID controller for Windows XP
; Copyright (c) 2000-2001 HighPoint Technologies, Inc. All rights reserved
;
[Version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%HIGHPOINT%
;CatalogFile=HPT3xx.CAT
DriverVer=09/19/2001,2.0.0919

[DestinationDirs]
DefaultDestDir  = 12 ; DIRID_DRIVERS

[ControlFlags]
;
; Exclude the following devices from Select Device list.
; These represent 'combination' driver nodes, for which there are separate items to be
; presented to the user.  These combination nodes are only used when figuring out what
; driver node to associate with a pre-existing service.
;
;ExcludeFromSelect = SCSI\ProcessorHPT_____RCM_DEVICE______
;ExcludeFromSelect = *

[Manufacturer]
%HighPoint%=HighPoint

;[NODRV]
;
; The empty service entry is to fool the class installer - without a service
; entry this install section would be rejected as being part of a win9x inf.
;
;AddReg=NODRV_AddReg


;[NODRV.Services]
;AddService = , %SPSVCINST_ASSOCSERVICE%   ; null service install

[HighPoint]
%PCI\VEN_1103&DEV_0004&REV_03.DeviceDesc%=Hpt3xxPCI,PCI\VEN_1103&DEV_0004&REV_03
%PCI\VEN_1103&DEV_0004&REV_04.DeviceDesc%=Hpt3xxPCI,PCI\VEN_1103&DEV_0004&REV_04
%PCI\VEN_1103&DEV_0004&REV_05.DeviceDesc%=Hpt3xxPCI,PCI\VEN_1103&DEV_0004&REV_05
;%SCSI\ProcessorHPT_____RCM_DEVICE______.DeviceDesc% = NODRV, SCSI\ProcessorHPT_____RCM_DEVICE______

[Hpt3xxPCI.NT]
CopyFiles=@Hpt3xx.sys
Reboot

[Hpt3xxPCI.NT.Services]
AddService = Hpt3xx, %SPSVCINST_ASSOCSERVICE%, Hpt3xxPCI_Service_Inst, Miniport_EventLog_Inst

[Hpt3xxPCI_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\Hpt3xx.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_pci_addreg

;*************************************************************
;These addreg sections should be used when installins services to indicate
;which interface types are safe for PNP and which aren't.  INTERFACE_TYPE
;is defined in NTDDK.H

[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001

;*************************************************************
;The EventLog entries are the same for all SCSI miniports.
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,"%%SystemRoot%%\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7

[SourceDisksNames]
1 = %InstallDisk%,\disk1,,,

[SourceDisksFiles]
;Hpt3xx.inf = 1,,
Hpt3xx.sys = 1,,

;[NODRV_AddReg]
;Dummy AddReg section

[strings]
HighPoint="HighPoint Technologies, Inc."
PCI\VEN_1103&DEV_0004&REV_03.DeviceDesc="HPT370 UDMA/ATA100 RAID Controller"
PCI\VEN_1103&DEV_0004&REV_04.DeviceDesc="HPT370 UDMA/ATA100 RAID Controller"
PCI\VEN_1103&DEV_0004&REV_05.DeviceDesc="HPT372 UDMA/ATA133 RAID Controller"
;SCSI\ProcessorHPT_____RCM_DEVICE______.DeviceDesc = "HighPoint RCM Device"
InstallDisk="HighPoint HPT370/372 IDE RAID Driver Diskette"

;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001