Workstation for OS2 ODI Client
Installation Procedure : (Location of Driver: \NWCLIENT\OS2\PCIOS2.SYS)
========================
1. Copy the PCIOS2.SYS file into the NETWARE subdirectory of your
hard disk from the Driver Diskette A:\NWCLIENT\OS2.
2. Add or replace the PCIOS2.SYS in the CONFIG.SYS file.
3. Edit the NET.CFG file that you copied over.Edit the file per your
requirements (see examples below). If there are two frame types
listed, whichever frame type is listed first,that is the one that
the driver will load. See below for examples.
4. Reboot your system to get service of network.
Sample Configuration Files:
CONFIG.SYS :
DEVICE=C:\NETWARE\LSL.SYS ; OS/2 Requester supported
DEVICE=C:\NETWARE\DDAEMON.SYS ; OS/2 Requester supported
DEVICE=C:\NETWARE\PCIOS2.SYS ;
DEVICE=C:\NETWARE\IPX.SYS ; OS/2 Requester supported
NET.CFG :
LINK DRIVER PCIOS2
FRAME ETHERNET_802.3
FRAME ETHERNET_802.2
NOTE:
-----
You can bind several frame types to the IPX protocol to support various
configurations. Include this in the Link Driver PCIOS2 section of the
NET.CFG file. A sample is shown below:
Link Driver PCIOS2
frame Ethernet_802.3
frame Ethernet_802.2
frame Ethernet_II
frame Ethernet_snap
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.