LAN Manager Workstation/Server
Setup driver procedures on LAN Manager workstation/server :
-----------------------------------------------------------
Location of Driver:(DOS) \MSLANMAN.DOS\DRIVERS\ETHERNET\PCIND\PCIND.DOS
(OS/2)\MSLANMAN.OS2\DRIVERS\ETHERNET\PCIND\PCIND.OS2
1. Run the appropriate Microsoft Lan Manager SETUP for computer you
are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
item , insert the PCIND driver disk,select the driver and follow
the directions.
2. When completed, reboot your computer.
NOTES:
1. Parameters for the PROTOCOL.INI file:
DRIVERNAME: This is the one required parameter. See example at top
of this document for syntax.
AdapterID : This keyword is provided by PCIND, and is required
when more than one PCI Ethernet Adapters exist on one
system. You must modify the AdapterID value in file,
\LANMAN\PROTOCOL.INI, by yourself.
2. Sample PROTOCOL.INI for LAN Manager:
[PROTMAN]
DRIVERNAME = PROTMAN$
DYNAMIC = YES
PRIORITY = NETBEUI
[NETBEUI_XIF]
Drivername = netbeui$
SESSIONS = 6
NCBS = 12
BINDINGS = "PCIND_NIF"
LANABASE = 0
[PCIND_NIF]
;
; PCIND PROTOCOL.INI Sample Adapter
;
DriverName = PCIND$
AdapterID = @0123456789A
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.