1. rtl8029as.zip Driver
2. LMOS2.TXT File Contents

LMOS2.TXT Driver File Contents (rtl8029as.zip)

*****************************************************************************
*									    *
*		    LR2000 PLUS PnP Ethernet Adapter			    *
*									    *
*	       NDIS2 Driver for MS LAN MANAGER OS2 Server		    *
*									    *
*****************************************************************************

Introduction:
=============

  The  Ethernet  NDIS2	Driver	for  LAN  MANAGER OS2 Server confirms to the
  Network Driver Interface Specification(NDIS2). This document shows you how
  to setup the driver and how to  use  the enhanced functions by setting the
  custom keywords in configuration file.


Contents of the Subdirectory:
=============================

    LMOS2.TXT		   This file.
    LRPND.OS2		   The NDIS2 driver for LAN MANAGER OS2 Server.
    PROTOCOL.INI	   Sample protocol.ini file.
    ..\..\NIF\LR2000P.NIF  The installation information file.


Installation:
=============

  Before starting with the installation process, make sure that the adapter
  is properly installed and configured. You  can use the diagnostic program
  (A:\SETUP.EXE) to make sure your connection with the network is correct.

  Installing driver procedure on LAN MANAGER OS2 Server:
  -----------------------------------------------------------

  1) If you install LAN Manager for the first time, you Install LAN Manager
     to your HardDisk by running SETUP.EXE program from the setup diskette.
     Upon completion of the workstation's last disk installation, you  will
     be asked if you want to import additional network drivers.Answer "YES".

     If  you  have  already  installed	LAN  Manager in your hard disk, run
     SETUP.EXE	from HardDisk and select "Actions"->"Import Network Driver"
     option.

  2) Insert the NDIS2 driver diskette into drive 'A'and follow the steps on
     the  screen . Select  the	"LR2000 PLUS PnP Ethernet Adapter" card and
     press "ENTER", then SETUP.EXE program  will copy  the necessary  NDIS2
     driver programs from the driver diskette to your hard disk , according
     to LAN MANAGER file structure.

  3) Reboot your computer for the changes to take effect.



  NOTE:
  -----
  Multiple Lan Adapters in a system:
     If you want to install mutiple Lan adapter in your system, you have to
     use the keyword, PNPID, in PROTOCOL.INI file at LAN MANAGER  directory
     to let driver locate the right adapter. You can run A:\SETUP.EXE under
     DOS prompt to show all the Ethernet addresses of your adapters.


Configuration Files:
====================

    Sample of configuration file:
    -----------------------------
    (Suppose the Lan Requester package is installed at C:\NET directory)

    File Name:		C:\CONFIG.SYS
    ----------
	DEVICE=C:\IBMCOM\MACS\LRPND.OS2

    File Name:		C:\STARTUP.CMD
    ----------
	NET START SERVER
	@if errorlevel 2 C:\IBMLAN\NETPROG\lserr.exe

    File Name:		C:\IBMCOM\PROTOCOL.INI
    ----------
	[IBMLXCFG]
	   ...
	   LRPND_nif = LRPND.nif
	   ...
	[NETBEUI_nif]
	   ...
	   Bindings = LRPND_nif
	   ...
	[ODI2NDI_nif]
	   ...
	   Bindings = LRPND_nif
	   ...
	[TCPIP_nif]
	   ...
	   Bindings = LRPND_nif
	[LRPND_nif]
	   DriverName	 = LRPND$
	   Iobase	 = 0x0300
	   Interrupt	 = 5
	   EARLYRECEIVE  = 0
	   EARLYTRANSMIT = 0
	   FULLDUPLEX	 = 0
	   PNPID	 = 0



    Custom Keywords:
    ----------------
	PNPID="hhhhhhhhhhhh"        This keyword is the Ethernet Address of
				    the adapter you want to drive. If there
				    are  more than one ethernet adapters in
				    your  system ,  you  have  to  use this
				    keyword to let driver locate  the right
				    adapter. However, you don't have to use
				    this property or let  the  value  to be
				    zero (i.e. PNPID=0) if  there  is  only
				    one adapter in your system.

				    Note:  Please  remember  to  enter	the
					   double quotes.

	EARLYTRANSMIT		    This  keyword  is  used to enable turbo
				    transmission mode for accelerating data
				    transmission.

	EARLYRECEIVE		    This keyword is  used  to  enable turbo
				    transmission mode for accelerating data
				    receiption.

	FULLDUPLEX		    This  keyword  is used  to enable  full
				    duplex mode.

	Note:	For  PnP mode,the IOBASE and INTERRUPT keywords are ignored
		in your PROTOCOL.INI file.