Artisoft LANtastic version 6.1 Power Suite Installation ---------------------------------------- LANtastic version 6.1 uses the DOS NDIS driver located in \NDIS.DOS. Use the following instructions (or those located in your LANtastic documentation) to install the LANtastic client software and the Adaptec DOS NDIS or ODI driver. Both DOS and Windows installation instructions are described below. DOS Installation Instructions ---------------------------------------- 1. Insert the LANtastic Diskette #1 in your diskette drive and start the installation program by typing: a:\install.exe 2. After providing your registration information, select the LANtastic options you wish to install from the "Power Suite Features" selection screen. 3. From the "LANtastic Setup screen," select your Computer Name (must be unique), Maximum number of users that can access your machine at once, the installation directories for the LANtastic program and control files, specify whether you wish to share drives and printers, and then specify the LANtastic files you wish to install. 4. Set up any automatic drive connections on the "Connections Setup" screen. 5. On the "Universal Client Options" screen, specify if you want to access Windows NT, Windows 95, or Windows for Workgroups servers (using the SMB protocol), or NetWare servers (using the NCP protocol). NOTE: If you want to add NetWare NCP support, you will need to select the "Artisoft Noderunner Adapter" in Step 8, and then, after finishing your installation, make configuration file changes manually, as described in the "Using NCP for NetWare Connections" below. 6. On the "LANtastic Options" screen, specify whether you want support for HP JetDirect printers or Workstation Cache installed. 7. On the "Other Options" screen, specify if you want to install the Install Services (requires 25 MB of disk space). 8. On the "Network Adapter Setup" screen, choose the "Use NDIS driver for non-Artisoft adapter" option, and specify "a:\ndis.dos" as the directory path to your NDIS driver. Next, place your Adaptec diskette in drive a:, and select the "Search" option. Next, select "OK" to confirm your choice. 9. On the "LANtastic Setup Summary" screen, confirm all of your previous choices by selecting "Install." 10. You will be prompted for each LANtastic installation diskette sequentially so that all necessary files may be copied. Upon completion of the file copy process, you will be prompted to reboot your system so that your installation can take effect. Windows Installation Instructions ---------------------------------------- When you install LANtastic for Windows, the DOS interface is also installed automatically. 1. Insert the LANtastic Diskette #1 in drive a:. Select Run from the Windows Program Manager File menu. Start the intallation program by typing: a:SETUP <Enter> 2. Choose "Continue" from the "Welcome Screen" to view the "Registration Screen." Enter your registration information and choose "Yes." 3. The "LANtastic Power Suite Features Selection Screen" will appear. Select the options you wish to install (be sure to select the "LANtastic Network Operating System"), and then choose "Quick Install" (or "Custom Install" if you wish to install LANtastic's Windows NT (SMB) or NetWare (NCP) support, or you want to enable the workstation Cache utility or enable HP JetDirect printer support). Select "OK" to go to the next screen. 4. The next screen will allow you to enter your computer name (must be unique), enable drive and printer sharing on your computer, specify whether you want to install online manuals (5 MB required), or change the default installation directory. If you selected "Custom Install" in Step 3, you will also need to specify the maximum number of users that can connect to your computer, and the LANtastic files you wish to install. Make your choices and then select "OK." 5. The next screen will allow you to define one or more automatic connections to other computers or printers. Only the "Custom Install" option will allow you to set up automatic connections to Windows or NetWare servers. 6. If you chose "Custom Install," the next three screens allow you to select custom options. The first allows you to enable connectivity to Windows (Windows NT, Windows 95, Windows for Workgroups) and NetWare servers. The next allows you to enable HP JetDirect printer support. The third lets you configure the system as an installation server (requires 25 MB of disk space). NOTE: If you want to add NetWare NCP support, you will need to select the "Artisoft Noderunner Adapter" in Step 7, and then, after finishing your installation, make configuration file changes manually, as described in the "Using NCP for NetWare Connections" below. 7. The next screen, "Network Adapter Setup," allows you to configure your network adapter. Select the "Use NDIS driver for non-Artisoft adapter" option. Insert your Adaptec diskette in drive a:, specify "a:\ndis.dos" as the path to your NDIS driver, and select the "Search" option. Then, selct "OK." 8. At the "Setup Summary" screen, make any necessary changes to your selections, and choose "Install" to begin copying the LANtastic files to your system. You will be prompted to install the LANtastic installation diskettes sequentially until all system files are copied. Upon completion of the file copy process, you will be prompted to reboot your system so that your installation can take effect. Using NCP for NetWare Connections ---------------------------------------- You must select the "Artisoft Noderunner Adapter" as your adapter during the LANtastic installation process to enable NetWare NCP support. After the LANtastic installation is complete, follow the instructions below to manually edit your configuration files to replace the Artisoft Noderunner adapter with your Adaptec adapter. 1. Copy the EMPCI.COM DOS ODI driver from the \DOSODI directory on your Adaptec diskette to the \LANTASTI directory on your computer. 2. Using any text editor, edit the \LANTASTI\STARTNET.BAT file, and change: NRODI to: EMPCI 3. Edit the NET.CFG file in your \LANTASTI directory, and replace the line: LINK DRIVER NRODI with: LINK DRIVER EMPCI Remove any references to PORT or INT from within the LINK DRIVER EMPCI section. Those parameters are not valid for your adapter. 4. Edit the STARTNET.CFG file in your \LANTASTI directory, and add the command NCP_SUPPORT under the [REDIR] section: [REDIR] NCP_SUPPORT Sample LANtastic Configuration Files ---------------------------------------- CONFIG.SYS ---------------- DEVICE=C:\WINDOWS\HIMEM.SYS DEVICE=C:\WINDOWS\EMM386.EXE NOEMS LASTDRIVE=Z FILES=100 DOS=UMB DOS=HIGH SHELL=C:\COMMAND.COM C:\ /E:1024 /P SET TEMP=C:\TEMP BUFFERS=30 DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI DEVICE=C:\LANTASTI\EMPCI.DOS AUTOEXEC.BAT ---------------- . . CALL C:\LANTASTI\STARTNET.BAT . . . STARTNET.BAT ---------------- @Echo off C: cd C:\LANTASTI SET LAN_CFG=C:\LANTASTI Echo ===== Begin LANtastic configuration ===== PATH C:\LANTASTI;%PATH% SET LAN_DIR=C:\LANTASTI.NET NETBEUI AI-NDIS BIND_TO=EMPCI_NIF AILANBIO @STARTNET.CFG REDIR NAME @STARTNET.CFG SERVER C:\LANTASTI.NET @STARTNET.CFG rem If CONNECT.BAT exists, run it to set up connections. IF EXIST CONNECT.BAT GOTO :CONNECT rem Otherwise set up connections specified during install. NET LPT TIMEOUT 10 GOTO :CONNECT_DONE :CONNECT Echo Setting up LANtastic connections from CONNECT.BAT rem Build CONNECT.BAT like this: "NET SHOW/CONNECT > C:\LANTASTI\CONNECT.BAT" rem (or run the batch file SETNET.BAT) CALL CONNECT.BAT :CONNECT_DONE Echo ===== End LANtastic configuration ===== cd \ \LANTASTI\PROTOCOL.INI ---------------- [PROTMAN] DriverName=PROTMAN$ Dynamic=Yes Priority=NETBEUI [NETBEUI_XIF] DriverName=netbeui$ Sessions=6 NCBS=12 Bindings=EMPCI_NIF LANABASE=1 [MS$DLC] Drivername=msdlc$ bufqelements=128 dlcretries=5 stations=7 swap=0 ;Change line below to saps=<number of printer tasks> saps=7 Bindings=EMPCI_NIF [EMPCI_NIF] DriverName=EMPCI$ ; ; See "\readme\ndis.txt" for a description of optional parametersDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.