1. e4000-04.exe Driver
2. Release.txt File Contents

Release.txt Driver File Contents (e4000-04.exe)

DATE: 1/07/97
ROMID:	0AAJF004
· Added the LANWORKS Bootrom LSA/PXE version .99b.04 to the System BIOS in the lower 128KB of the flash part.
· Updated DMI, Added SYSID support interface requirements UUID and 1394 ID.
· Resolved IOMEGA ATAPI Zip 100 drives responding incorrectly during POST as a Floptical device.
· Resolved issues with RTC with the SMI Handler.
· Added CMOS option to enable/disable CS4236b Audio controller.
· Added BIOS support for the LS-120 (Floptical) Drive. 
· Resolved LS-120 (Floptical) Drive not working when present with some ATAPI CDROMs on the same channel. 
· Added the Advanced Power Management Upgrade based on a new setup question "Processor" that allows the user to select the PM method that the processor of the system will use.
· Modified Advanced Power Management to disable resume timer capability.
· Added CMOS option enable/disable ACPI.
· Updated ACPI
 	Added code to allow the system to search the PCI bus for the PIIX4 Dev #/Fun #.
 	Changed the Index/Data ports for the SMC672 Super IO.
 	Removed ASL Code for thermal zones.
 	Added Motherboard resource for LM78.
 	Changed Dev#/Func# for all PCI Devices. 
· Updated ASL code for ACPI.
· Updated shutdown code to set bit 0 and bit 12 of SR15 and CSR4 (TXDPOLL & DRX bits) to prevent the memory exception when aborting from the Lanworks bootrom.
· Correction made to the code that AMD provided for magic packet.  TSDPOLL bit is now cleared in CSR4. 
· Added code prior to enabling magic packet to issue a soft reset to the LAN Controller and to force the LAN Controller into an Auto-Detect Mode.
· Removed Bus Mastering for LAN Controller
· Modified power-up check code.