1. e4000-04.exe Driver
2. Readme.txt File Contents

Readme.txt Driver File Contents (e4000-04.exe)

*************************WARNING**********************
ONLY LOAD THIS BIOS ON A SYSTEM WITH THE CURRENT BIOS VERSION 0AAJFxxx.
******************************************************
Instructions on updating the BIOS:

1. Create a MS-DOS or Windows 95 boot disk.
	A. Format a blank floppy disk in drive A: using the format command
	B. Ex. FORMAT A: /U /S
2. Copy all the files from the compressed file to the disk created in Step 1.
3. Depending on the Operating System or environment close all applications and shutdown the system.
	A. Windows 95 (Click the START button on the taskbar) choose shutdown.
	B. Windows NT (press CTRL + ALT + DEL) choose shutdown.
	C. Windows 3.x from the Program Manager choose the file option on the menu, select Close Program Manager and answer Yes.
4. Put the floppy disk in drive A, type A: and press <enter> key.
5. Restart the system with CTRL + ALT + DEL or Turn on the system with the power button.
6. At the "A" prompt, type the word FLASH and press <enter> key.
7. The system will now begin to update the BIOS.
8. After the system BIOS is updated, the system will shutdown.
9. The BIOS should now be successfully installed.

Instructions on loading BIOS Defaults:

1. Turn on the system using the power button.
2. During the memory count a message press F1 to enter setup is displayed.
3. Press the F1 key.
4. Press the F5 key to load setup defaults.
5. Press the F10 key to save and exit setup.
6. The BIOS is now successfully installed with defaults.