;----------------------------------------------------------------------- ; FILE: oemsetup.inf ; Version: 5.0 ; PURPOSE: GUI setup file for Adaptec SCSI Host Adapters for Windows NT ; Changes: ; 9/1/95 Make changes in registry for adding APA-1460 into PCMCIA ; database. ; 9/18/95 Make Scsidisk a system device if it is disabled in the ; registry. ; 4/1/96 Make Scsidisk a boot device, and Scsicdrm a system device ; 7/14/97 Added support to distinguish between aic-78xx drivers for ; NT 3.5x and NT 4.0. We display different text messages ; which refer the user to enter different directories for ; the different drivers. ; ;----------------------------------------------------------------------- ;----------------------------------------------------------------------- ; OPTION TYPE ; ----------- ; This identifies the Option type we are dealing with. The different ; possible types are: ; ; COMPUTER, VIDEO, POINTER, KEYBOARD, LAYOUT, SCSI, TAPE, PRINTER, ... ;----------------------------------------------------------------------- [Identification] OptionType = SCSI ;----------------------------------------------------------------------- ; LANGUAGES SUPPORTED ; ------------------- ; ; The languages supported by the INF, For every language supported ; we need to have a separate text section for every displayable text ; section. ; ;----------------------------------------------------------------------- [LanguagesSupported] ENG ;----------------------------------------------------------------------- ; OPTION LIST ; ----------- ; This section lists the Option key names. These keys are locale ; independent and used to represent the option in a locale independent ; manner. ; ;----------------------------------------------------------------------- [Options] "sparrow" = sparrow "ARROW" = arrow "T358" = T358 "T348" = T348 "aha2920" = fd16_700 "78xx35" = 78NT35 "78xx40" = 78NT40 "78U235" = 78U235 "78U240" = 78U240 "aha154x" = aha154x "aha174x" = aha174x ;----------------------------------------------------------------------- ; OPTION TEXT SECTION ; ------------------- ; These are text strings used to identify the option to the user. There ; are separate sections for each language supported. The format of the ; section name is "OptionsText" concatenated with the Language represented ; by the section. ; ;----------------------------------------------------------------------- [OptionsTextENG] "sparrow" = "Adaptec 151x/152x/AIC 6260/6360, APA-1425/50/60" "ARROW" = "Adaptec 274x/284x/AIC-777x" "T358" = "Adaptec APA-358 MiniSCSI EPP Driver" "T348" = "Adaptec APA-348 MiniSCSI Plus Driver" "aha2920" = "Adaptec AHA-2920 (PCI)" "78xx35" = "Adaptec PCI SCSI Controller: AHA-294x/AHA-394x/AHA-4944 or AIC-78xx(NT 3.51)" "78xx40" = "Adaptec PCI SCSI Controller: AHA-294x/AHA-394x/AHA-4944 or AIC-78xx(NT 4.0)" "78U235" = "Adaptec PCI Ultra2 SCSI Controller: AHA-294xU2W/295xU2W/AIC-789x(NT 3.5x)" "78U240" = "Adaptec PCI Ultra2 SCSI Controller: AHA-294xU2W/295xU2W/AIC-789x(NT 4.0)" "aha154x" = "Adaptec AHA-154x/AHA-164x" "aha174x" = "Adaptec AHA-174x" ;----------------------------------------------------------------------------------------- ; SCSI MINIPORT DRIVERS: ; ; Order of the information: ; ; Class driver = Type, Group, ErrorControl, Tag, EventMessageFile, TypesSupported ; ;----------------------------------------------------------------------------------------- [MiniportDrivers] sparrow = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 1, %SystemRoot%\System32\IoLogMsg.dll , 7 arrow = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 2, %SystemRoot%\System32\IoLogMsg.dll , 7 T358 = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 3, %SystemRoot%\System32\IoLogMsg.dll , 7 T348 = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 4, %SystemRoot%\System32\IoLogMsg.dll , 7 fd16_700 = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 5, %SystemRoot%\System32\IoLogMsg.dll , 7 78NT35 = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 6, %SystemRoot%\System32\IoLogMsg.dll , 7 78NT40 = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 7, %SystemRoot%\System32\IoLogMsg.dll , 7 78U235 = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 17, %SystemRoot%\System32\IoLogMsg.dll , 7 78U240 = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 20, %SystemRoot%\System32\IoLogMsg.dll , 7 aha154x = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 8, %SystemRoot%\System32\IoLogMsg.dll , 7 aha174x = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 9, %SystemRoot%\System32\IoLogMsg.dll , 7 [AdaptecInstall] ; <ID> = REGISTRY_KEY 78NT40 = aic78xx 78NT35 = aic78xx 78U235 = aic78u2 78U240 = aic78u2 ;--------------------------------------------------------------------------- ; 1. Identify ; ; DESCRIPTION: To verify that this INF deals with the same type of options ; as we are choosing currently. ; ; INPUT: None ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL ; $($R1): Option Type (COMPUTER ...) ; $($R2): Diskette description ;--------------------------------------------------------------------------- [Identify] ; ; read-syms Identification ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Inside Identify" set Status = STATUS_SUCCESSFUL set Identifier = $(OptionType) set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;------------------------------------------------------------------------ ; 2. ReturnOptions: ; ; DESCRIPTION: To return the option list supported by this INF and the ; localised text list representing the options. ; ; ; INPUT: $($0): Language used. ( ENG | FRN | ... ) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE ; STATUS_FAILED ; ; $($R1): Option List ; $($R2): Option Text List ;------------------------------------------------------------------------ [ReturnOptions] ; ; set Status = STATUS_FAILED set OptionList = {} set OptionTextList = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) goto returnoptions else set Status = STATUS_NOLANGUAGE goto finish_ReturnOptions endif ; ; form a list of all the options and another of the text representing ; returnoptions = + set OptionList = ^(Options, 0) set OptionTextList = ^(OptionsText$($0), 1) set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ; ; 3. InstallOption: ; ; FUNCTION: To copy files representing Options ; To configure the installed option ; To update the registry for the installed option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; $($2): SourceDirectory ; $($3): AddCopy (YES | NO) ; $($4): DoCopy (YES | NO) ; $($5): DoConfig (YES | NO) ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ; [InstallOption] ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Inside InstallOption" ;=========================================================================== ;registry changes for APA-1460 PCMCIA support under NT3.51 (JSG - 9/4/95) set KeyName = "System\CurrentControlSet\Services\Pcmcia\DataBase" OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) PcmciaKeyHandle ifstr(i) $(PcmciaKeyHandle) != "" OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\Adaptec, Inc." $(!REG_KEY_ALL_ACCESS) TestKeyHandle ifstr(i) $(TestKeyHandle) == "" CreateRegKey $(PcmciaKeyHandle) {"Adaptec, Inc.",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" AdptKeyHandle CreateRegKey $(AdptKeyHandle) {"APA-1460 SCSI Host Adapter",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" APAKeyHandle SetRegValue $(APAKeyHandle) {Driver,0,$(!REG_VT_SZ),"sparrow"} CloseRegKey $(APAKeyHandle) CloseRegKey $(AdptKeyHandle) endif CloseRegKey $(TestKeyHandle) endif CloseRegKey $(PcmciaKeyHandle) ;end of PCMCIA Database registry changes ;=========================================================================== ;=========================================================================== ;Make Scsidisk a boot device if currently set to disabled. (JSG - 9/18/95) set KeyName = "System\CurrentControlSet\Services\Scsidisk" OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) ScsidiskKeyHandle ifstr(i) $(ScsidiskKeyHandle) != "" GetRegValue $(ScsidiskKeyHandle) Start StartInfo ifint *($(StartInfo),4) == 4 SetRegValue $(ScsidiskKeyHandle) {Start,0,$(!REG_VT_DWORD),0} endif endif CloseRegKey $(ScsidiskKeyHandle) ;end of ScsiDisk registry changes ;=========================================================================== ;=========================================================================== ;Make Scsicdrm a system device if currently set to disabled. (JSG - 4/1/95) set KeyName = "System\CurrentControlSet\Services\Scsicdrm" OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) ScsicdrmKeyHandle ifstr(i) $(ScsicdrmKeyHandle) != "" GetRegValue $(ScsicdrmKeyHandle) Start StartInfo ifint *($(StartInfo),4) == 4 SetRegValue $(ScsicdrmKeyHandle) {Start,0,$(!REG_VT_DWORD),1} endif endif CloseRegKey $(ScsicdrmKeyHandle) ;end of Scsicdrm registry changes ;=========================================================================== ; ; Set default values for ; set Status = STATUS_FAILED set DrivesToFree = {} ; ; extract parameters ; set Option = $($1) set SrcDir = $($2) set AddCopy = $($3) set DoCopy = $($4) set DoConfig = $($5) ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "About to check Language Support" ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) else set Status = STATUS_NOLANGUAGE goto finish_InstallOption endif read-syms Strings$($0) ; ; check to see if Option is supported. ; set OptionList = ^(Options, 0) ifcontains $(Option) in $(OptionList) else Debug-Output "SCSI.INF: SCSI option is not supported." goto finish_InstallOption endif set OptionList = "" ; ; Option has been defined already ; set MiniportDriver = #(Options, $(Option), 1) set Type = $(#(MiniportDrivers, $(MiniportDriver), 1)) set Group = #(MiniportDrivers, $(MiniportDriver), 2) set ErrorControl = $(#(MiniportDrivers, $(MiniportDriver), 3)) set Tag = #(MiniportDrivers, $(MiniportDriver), 4) set EventMessageFile = #(MiniportDrivers, $(MiniportDriver), 5) set TypesSupported = #(MiniportDrivers, $(MiniportDriver), 6) set Start = $(!SERVICE_BOOT_START) ;=========================================================================== ; ; MHG: 1/26/98 ; ; This ifstr(i) statement was added because this OEMSETUP.INF file ; was failing whenever we attempted to install a non-AIC78XX host ; adapter. We added this section dated 12/5/97 to provide support ; for our Ultra2 PCI host adapters and got it from their group, but ; it produces an error when any other non-AIC78XX host adapter is used. ; ; To work around this problem, we now check to see if the U2 board ; has been selected to install. If it has, we do the MemMapped I/O ; support registry entry addition. ; ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "About to start first check section" ifstr(i) $(Option) == "78U240" ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Doing new MemMapped Stuff" ; MHG: This was added for Memory Mapped I/O support for the Ultra2 Series ; 12/5/97 ; ; Registry update set SNode = #(AdaptecInstall, $(MiniportDriver), 1) set KeyName = "System\CurrentControlSet\Services\"$(SNode) OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) AdptKeyHandle ifstr(i) $(AdptKeyHandle) != "" OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"Parameters\Device" $(!REG_KEY_ALL_ACCESS) TestKeyHandle ifstr(i) $(TestKeyHandle) == "" CreateRegKey $(AdptKeyHandle) {"Parameters",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" ParamKeyHandle CreateRegKey $(ParamKeyHandle) {"Device",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" DevKeyHandle SetRegValue $(DevKeyHandle) {DriverParameters,0,$(!REG_VT_SZ),"/MEMMAP"} CloseRegKey $(DevKeyHandle) CloseRegKey $(ParamKeyHandle) endif CloseRegKey $(TestKeyHandle) endif CloseRegKey $(AdptKeyHandle) ; ;end Registry Update from 12/5/97 ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Done with MemMapped Stuff" else-ifstr(i) $(Option) == "78U235" ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Checking ==78u235" set SNode = #(AdaptecInstall, $(MiniportDriver), 1) set KeyName = "System\CurrentControlSet\Services\"$(SNode) OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) AdptKeyHandle ifstr(i) $(AdptKeyHandle) != "" OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"Parameters\Device" $(!REG_KEY_ALL_ACCESS) TestKeyHandle ifstr(i) $(TestKeyHandle) == "" CreateRegKey $(AdptKeyHandle) {"Parameters",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" ParamKeyHandle CreateRegKey $(ParamKeyHandle) {"Device",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" DevKeyHandle SetRegValue $(DevKeyHandle) {DriverParameters,0,$(!REG_VT_SZ),"/MEMMAP"} CloseRegKey $(DevKeyHandle) CloseRegKey $(ParamKeyHandle) endif CloseRegKey $(TestKeyHandle) ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Shouldn't see this 1" endif CloseRegKey $(AdptKeyHandle) ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Shouldn't see this 2" ; ;end Registry Update from 12/5/97 ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Shouldn't see this 3" ; ; End 1/26/98 Changes ; endif ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "Ready To Move On" ;=========================================================================== ; ; MHG : The next 8 lines added for the 358 and 348 ; ; shell "registry.inf" GetServicesEntryStart $(MiniportDriver) ; ifint $($ShellCode) == $(!SHELL_CODE_OK) ; ifstr(i) $($R0) == "STATUS_SUCCESSFUL" ; ifstr(i) $($R1) == $(!SERVICE_BOOT_START) ; set Start = $(!SERVICE_BOOT_START) ; endif ; endif ; endif ; ; MHG : End of special insert for 358 and 348 ; installtheoption = + ; ; Code to add files to copy list ; ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "About to copy files to copy list" ifstr(i) $(AddCopy) == "YES" set DoActualCopy = NO set FileToCheck = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2) LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck) ifstr(i) $(STATUS) == NO set DoActualCopy = YES endif ifstr(i) $(DoActualCopy) == NO shell "subroutn.inf" DriversExist $($0) $(String1) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "SCSI.INF: shelling DriversExist failed" goto finish_InstallOption endif ifstr(i) $($R0) == STATUS_CURRENT else-ifstr(i) $($R0) == STATUS_NEW set DoActualCopy = YES else-ifstr(i) $($R0) == STATUS_USERCANCEL Debug-Output "SCSI.INF: User cancelled SCSI installation" goto finish_InstallOption else Debug-Output "SCSI.INF: Error reported in DriversExist routine in SUBROUTN.INF" goto finish_InstallOption endif endif ifstr(i) $(DoActualCopy) == YES ; ; MHG 7/11/97: Added this section to display text in the dialog box ; which asks the user to type in the directory path ; for the miniport driver. If the user selected to install ; the aic78xx miniport, we display one string, otherwise ; we display another generic string. ; ;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS "About to Ask for path" ; ; We first check for the WinNT 4.0 version of our PCI driver being ; loaded. If the 4.0 driver is selected, display 4.0 text message. ; ifstr(i) $(Option) == "78xx40" shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String4) goto PathObtained ; ; Since 4.0 driver not selected, check for 3.51 driver for PCI and ; display message. ; else-ifstr(i) $(Option) == "78xx35" shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String5) goto PathObtained ; else ; ; ; ; If we get here, we can assume the user has selected a driver ; ; other than our aic78xx based series. Display a generic message ; ; ; shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2) ; endif endif ; ; End of MHG 7/11/97 changes ; ; ; MHG 9/30/97: Now we check to see if the user is installing the ; Ultra2 PCI SCSI Host Adapter. ; ifstr(i) $(Option) == "78U240" shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String6) goto PathObtained ; ; If 4.0 driver not selected, check for the 3.51 driver for the ; Ultra2 PCI SCSI Host Adapter and display proper message. ; else-ifstr(i) $(Option) == "78U235" shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String7) goto PathObtained else ; ; If we get here, we can assume the user has selected a driver ; other than our aic78xx based series. Display a generic message ; shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2) endif endif ; ; End of MHG 9/30/97 Changes for Ultra2 Support. ; PathObtained = + ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "SCSI.INF: shelling DoAskSourceEx failed" goto finish_InstallOption endif ifstr(i) $($R0) == STATUS_SUCCESSFUL set SrcDir = $($R1) ifstr(i) $($R2) != "" set DrivesToFree = >($(DrivesToFree), $($R2)) endif else Debug-Output "SCSI.INF: User cancelled asking source." goto finish_InstallOption endif install Install-AddCopyOption ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS" Debug-Output "Adding SCSI files to copy list failed" goto finish_InstallOption endif else set DoCopy = NO endif endif ifstr(i) $(DoCopy) == "YES" read-syms ProgressCopy$($0) install Install-DoCopyOption ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE" Debug-Output "Copying files failed" goto finish_InstallOption else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT" set Status = STATUS_USERCANCEL goto finish_InstallOption endif endif ifstr(i) $(DoConfig) == "YES" ; ; first run a privilege check on modifying the setup node ; shell "registry.inf" CheckSetupModify ifint $($ShellCode) != $(!SHELL_CODE_OK) goto finish_InstallOption endif ifstr(i) $($R0) != STATUS_SUCCESSFUL goto finish_InstallOption endif ; ; then make a new SCSI entry, the entry is created automatically ; enabled ; ; ; MHG : Here we are trying to differentiate between PCI and non-PCI ; miniport installation. If we are installing PCI we need to ; set the ServiceNode by using the AdaptecInstall, otherwise ; we can assume that the MiniportDriver value is already correct. ; This must actually be done is a couple placed but we will try it ; here first. ; ifstr(i) $(MiniportDriver) == "aic78xx" set ServiceNode = #(AdaptecInstall,$(MiniportDriver),1) ; ; MHG 9/30/97: Add Ultra2 Check ; else-ifstr(i) $(MiniportDriver) == "aic78u2" set ServiceNode = #(AdaptecInstall,$(MiniportDriver),1) else set ServiceNode = $(MiniportDriver) endif endif set ServiceBinary = System32\drivers\#(Files-ScsiMiniportDrivers, $(MiniportDriver), 2) set ServicesValues = { + {Type, 0, $(!REG_VT_DWORD), $(Type) }, + {Start, 0, $(!REG_VT_DWORD), $(Start) }, + {Group, 0, $(!REG_VT_SZ), $(Group) }, + {ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, + {Tag, 0, $(!REG_VT_DWORD), $(Tag) }, + {BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } + } set ParametersValues = "" set DeviceValues = {} set EventLogValues = { + {EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, + {TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } + } ; ; MHG 7/14/97: Here we need to see if we are installing an aic78xx ; family of PCI host adapter. If we are, we need to ; install the server with the name ADAPTEC instead ; of aic78xx or any other cryptic value. ; ifstr(i) $(Option) == "78xx40" set ServiceNode = #(AdaptecInstall,$(MiniportDriver),1) goto Add78xxServiceEntry else-ifstr(i) $(Option) == "78xx35" set ServiceNode = #(AdaptecInstall,$(MiniportDriver),1) goto Add78xxServiceEntry endif endif ; ; MHG 9/30/97: Now let's see if we need to install the Ultra2 ; version for the user. ; ifstr(i) $(Option) == "78U240" set ServiceNode = #(AdaptecInstall,$(MiniportDriver),1) goto Add78xxServiceEntry else-ifstr(i) $(Option) == "78U235" set ServiceNode = #(AdaptecInstall,$(MiniportDriver),1) goto Add78xxServiceEntry endif endif ; ; Looks like we are not installing one of the aic78xx family memebers. ; Now we can add the service entry with the normal host adapter ; miniport driver name. ; shell "registry.inf" MakeServicesEntry $(ServiceNode) + $(ServicesValues) + $(ParametersValues) + $(DeviceValues) + $(EventLogValues) + Parameters goto DoneWithServiceEntry ; ; We jump here if we are installing the aic78xx family ; Add78xxServiceEntry = + ;set ServiceNode = "ADAPTEC" shell "registry.inf" MakeServicesEntry $(ServiceNode) + $(ServicesValues) + $(ParametersValues) + $(DeviceValues) + $(EventLogValues) + Parameters ; ; Done with service entry stuff. ; DoneWithServiceEntry = + ; ; End MHG changes 7/14/97 ; ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "Couldn't execute MakeServicesEntry in registry.inf" goto finish_InstallOption endif ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "MakeServicesEntry failed for SCSI" goto finish_InstallOption endif endif set Status = STATUS_SUCCESSFUL finish_InstallOption = + ForListDo $(DrivesToFree) LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE" EndForListDo Return $(Status) [Install-AddCopyOption] ; ; Add the files to the copy list ; AddSectionKeyFileToCopyList Files-ScsiMiniportDrivers + $(MiniportDriver) + $(SrcDir) + $(!STF_WINDOWSSYSPATH)\drivers exit [Install-DoCopyOption] ; ; Copy files in the copy list ; CopyFilesInCopyList exit ;------------------------------------------------------------------------- ; 4. DeInstallOption: ; ; FUNCTION: To remove files representing Option ; To remove the registry entry corresponding to the Option ; ; INPUT: $($0): Language to use ; $($1): OptionID to install ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_NOLANGUAGE | ; STATUS_USERCANCEL | ; STATUS_FAILED ;------------------------------------------------------------------------- [DeInstallOption] ;=========================================================================== ;to remove registry changes for APA-1460 PCMCIA support under NT3.51 (JSG - 9/4/95) set KeyName = "System\CurrentControlSet\Services\Pcmcia\DataBase" OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) PcmciaKeyHandle OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\Adaptec, Inc." $(!REG_KEY_ALL_ACCESS) TestKeyHandle ifstr(i) $(TestKeyHandle) != "" DeleteRegTree $(PcmciaKeyHandle) "Adaptec, Inc." endif CloseRegKey $(TestKeyHandle) CloseRegKey $(PcmciaKeyHandle) ;end of PCMCIA Database registry changes ;=========================================================================== ; ; Set default values for ; set Status = STATUS_FAILED ; ; extract parameters ; set Option = $($1) ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) else set Status = STATUS_NOLANGUAGE goto finish_DeInstallOption endif read-syms Strings$($0) ; ; check to see if Option is supported. ; set OptionList = ^(Options, 0) ifcontains $(Option) in $(OptionList) else goto finish_DeInstallOption endif set OptionList = "" ; ; fetch details about option ; set MiniportDriver = #(Options, $(Option), 1) set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2) set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile) ; ; check to see if file is installed ; if not give success ; LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath) ifstr(i) $(STATUS) == "NO" set Status = STATUS_SUCCESSFUL goto finish_DeInstallOption endif shell "registry.inf" GetServicesEntryStart $(MiniportDriver) ifstr(i) $($R0) != "STATUS_SUCCESSFUL" ; this could happen if there is no start value or there is no ; key, in which case the option is not installed set Status = STATUS_SUCCESSFUL goto finish_DeInstallOption endif ifstr(i) $($R1) == $(!SERVICE_BOOT_START) shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(String3) ifstr(i) $($R0) != STATUS_SUCCESSFUL goto do_removal endif ifstr(i) $($R1) == "CANCEL" goto finish_DeInstallOption endif endif do_removal =+ ; ; disable the registry entry ; shell "registry.inf" RemoveServicesEntry $(MiniportDriver) ifint $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "SCSI.INF: Failed to shell RemoveServicesEntry" goto finish_DeInstallOption endif ifstr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "SCSI.INF: Failed to disable services entry" goto finish_DeInstallOption endif ; ; we won't remove the file because we can only do so during the next boot. ; if the user chooses to reinstall the same driver during this boot ; he will still end up deleting the driver on next boot. if the file ; should be deleted a warning should be put up saying that the user should ; not try to reinstall the driver during this boot ; ; AddFileToDeleteList $(FilePath) set Status = STATUS_SUCCESSFUL finish_DeInstallOption =+ return $(Status) ;------------------------------------------------------------------------- ; 5. GetInstalledOptions: ; ; FUNCTION: To find out the list of options which are installed ; ; INPUT: $($0): Language to Use ; ; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL | ; STATUS_FAILED ; ; $($R1): List of options installed ; $($R2): Option installed Text List ;------------------------------------------------------------------------- [GetInstalledOptions] set Status = STATUS_FAILED set InstalledOptions = {} set InstalledOptionsText = {} ; ; Check if the language requested is supported ; set LanguageList = ^(LanguagesSupported, 1) Ifcontains(i) $($0) in $(LanguageList) else set Status = STATUS_NOLANGUAGE goto finish_GetInstalledOptions endif set OptionList = ^(Options, 0) ForListDo $(OptionList) set MiniportDriver = #(Options, $($), 1) set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2) set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile) LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath) ifstr(i) $(STATUS) == "YES" shell "registry.inf" GetServicesEntryStart $(MiniportDriver) ifint $($ShellCode) == $(!SHELL_CODE_OK) ifstr(i) $($R0) == STATUS_SUCCESSFUL ifstr(i) $($R1) != $(!SERVICE_DISABLED) set OptionText = #(OptionsText$($0), $($), 1) set InstalledOptions = >($(InstalledOptions), $($)) set InstalledOptionsText = >($(InstalledOptionsText), $(OptionText)) endif endif endif endif EndForListDo set Status = STATUS_SUCCESSFUL finish_GetInstalledOptions =+ Return $(Status) $(InstalledOptions) $(InstalledOptionsText) ;************************************************************************** ; PROGRESS GUAGE VARIABLES ;************************************************************************** [ProgressCopyENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT is not correcly installed. Are you sure you want "+ "to cancel copying files?" ProCancelCap = "Setup Message" ProText1 = "Copying:" ProText2 = "To:" [StringsENG] String1 = "SCSI Adapter" String2 = "Please enter the full path to the OEM SCSI "+ "Adapter files. These files are located in the "+ "root directory on the Adaptec EZ-SCSI Drivers Disk." + "Then choose Continue." String3 = "The SCSI Adapter has been marked as a boot device. Removing "+ "it may cause the system not to boot."$(!LF)$(!LF)"Are you sure "+ "you want to remove the Adapter." ; String4 = "If you are running Windows NT 4.0 please insert the"+ ; "EZ-SCSI Setup Disk into your floppy drive and enter"+ ; "the following path below: \WINNT\4_0. If you are using"+ ; "Windows NT 3.51 please enter this path: \WINNT\3_5." + ; "Then choose Continue." String4 = "You have chosen to install the Windows NT 4.0 miniport driver "+ "for the following Adaptec PCI SCSI Host Adapter family: "$(!LF)$(!LF)+ "AHA-294x/AHA-394x/AHA-4944 or AIC-78xx. "$(!LF)$(!LF)+ "Click Continue to install driver." String5 = "You have chosen to install the following Adaptec PCI SCSI Host Adapter family: "+ "AHA-294x/AHA-394x/AHA-4944 or AIC-78xx. "$(!LF)+ "Enter this path below and click Continue: \3_5" String6 = "You have chosen to install the Windows NT 4.0 miniport driver "+ "for the following Adaptec PCI Ultra2 SCSI Host Adapter family: "$(!LF)$(!LF)+ "AHA-294xU2W/AHA-295xU2W/AIC-7890/91. "$(!LF)$(!LF)+ "Click Continue to install driver." String7 = "You have chosen to install the following Adaptec PCI Ultra2 SCSI Host Adapter family: "+ "AHA-294xU2W/AHA-295xU2W/AIC-7890/91. "$(!LF)+ "Enter this path below and click Continue: \3_5" [Source Media Descriptions] 1 = "Adaptec SCSI Controller Drivers Disk 1 of 1", TAGFILE = disk1 [Files-ScsiMiniportDrivers] sparrow = 1, sparrow.sys, SIZE=999 arrow = 1, arrow.sys, SIZE=999 T358 = 1, T358.SYS, SIZE=999 T348 = 1, T348.SYS, SIZE=999 78NT35 = 1, aic78xx.sys, SIZE=999 78NT40 = 1, aic78xx.sys, SIZE=999 aha154x = 1, aha154x.sys, SIZE=999 aha174x = 1, aha174x.sys, SIZE=999 fd16_700 = 1, fd16_700.sys, SIZE=999 78U235 = 1, aic78u2.sys, SIZE=999 78U240 = 1, aic78u2.sys, SIZE=999Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.