README.TXT Driver File Contents (7505178.exe)

NetWare Server Driver Installation Notes

There are three NetWare server drivers available on this CD.
Please read the following information to determine the 
correct driver to use.

\NWSERVER\E100B.LAN
This is the most current AHSM 3.31 spec driver and will work with all 
versions of NetWare except 3.11 as long as the MSM version is 3.61 or
greater.  You will get the following error message if the MSM is too
old:

"a symbol not being present......." 

To correct this you can use the driver in the 
\nwserver\nw3x4x.old directory. It follows the older
AHSM 3.30 spec and will run with older versions of MSM.


\NWSERVER\NW3X4X.OLD\E100B.LAN
This is the AHSM 3.30 spec driver is be used with non current
versions of MSM.  We recommend that you update your MSM and use
the AHSM 3.31 spec driver where possible.


\NWSERVER\311LAN\E100B.LAN
This driver supports NetWare 3.11 and should only be used
in a NetWare 3.11 server


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.45