; OEMSETUP.INF - This file is used by Setup to install QLA23xx Windows Server 2003/2000 SCSI PnP Miniport Driver
; Copyright 1996-2003 QLogic Corporation
[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%QLOGIC%
CatalogFile=ql2300.cat
DriverVer=06/27/2003,8.2.3.10
[SourceDisksNames]
1=%Floppy_Desc%,,,
[SourceDisksFiles]
ql2300.sys=1
qlsdm.dll=1
cocpyinf.dll = 1
[DestinationDirs]
ApiFileList = 11
DefaultDestDir = 12 ; DIRID_DRIVERS
CoCopyINF.CopyFiles = 11
[ApiFileList]
qlsdm.dll
[Manufacturer]
%QLOGIC%=QLOGIC
;*******************************
;QLogic Manufacturer device list
[QLOGIC]
%ql2300.DeviceDesc% = ql2300_Inst, PCI\VEN_1077&DEV_2300&SUBSYS_00091077, PCI\VEN_1077&DEV_2312&SUBSYS_00091077, PCI\VEN_1077&DEV_2312&SUBSYS_01001077, PCI\VEN_1077&DEV_2312&SUBSYS_01011077, PCI\VEN_1077&DEV_2312&SUBSYS_01021077, PCI\VEN_1077&DEV_2312&SUBSYS_01031077, PCI\VEN_1077&DEV_2312&SUBSYS_01091077, PCI\VEN_1077&DEV_2312&SUBSYS_011A1028, PCI\VEN_1077&DEV_2312&SUBSYS_013B1028, PCI\VEN_1077&DEV_2312&SUBSYS_013C1028, PCI\VEN_1077&DEV_2312&SUBSYS_027D1014, PCI\VEN_1077&DEV_2312&SUBSYS_010C1077, PCI\VEN_1077&DEV_2312&SUBSYS_010D1077, PCI\VEN_1077&DEV_2312&SUBSYS_01000E11, PCI\VEN_1077&DEV_2312&SUBSYS_01010E11, PCI\VEN_1077&DEV_2312&SUBSYS_01020E11, PCI\VEN_1077&DEV_2312&SUBSYS_12BA103C, PCI\VEN_1077&DEV_2312&SUBSYS_12C2103C, PCI\VEN_1077&DEV_2312&SUBSYS_34BA8086, PCI\VEN_1077&DEV_2312&SUBSYS_01021749
[ControlFlags]
ExcludeFromSelect = PCI\VEN_1077&DEV_2300&SUBSYS_00091077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_00091077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01001077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01011077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01021077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01031077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01091077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_011A1028
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_013B1028
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_013C1028
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_027D1014
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_010C1077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_010D1077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01000E11
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01010E11
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01020E11
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_12BA103C
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_12C2103C
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_34BA8086
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01021749
[ql2300_Inst]
CopyFiles = @ql2300.sys
CopyFiles = ApiFileList
AddReg = ql2300_Registry_Update
AddReg = qlsdm_Registry_Update
CopyInf = qlpseudo.inf
[ql2300_Inst.CoInstallers]
AddReg = CoCopyINF.AddReg
CopyFiles = CoCopyINF.CopyFiles
[ql2300_Inst.HW]
AddReg = ql2300_AddReg.HW
[ql2300_Registry_Update]
HKLM,SYSTEM\CurrentControlSet\Services\ql2300\Parameters\Device,DriverParameters,0x00000000,"UseSameNN=0"
HKLM,SYSTEM\CurrentControlSet\Services\ql2300\Parameters\Device,MaximumSGList,0x00010001,0x41
HKLM,SYSTEM\CurrentControlSet\Services\ql2300\Parameters\Device,NumberOfRequests,0x00010001,0x96
HKLM,SYSTEM\CurrentControlSet\Services\Disk,TimeOutValue,0x00010001,0x3C
[ql2300_AddReg.HW]
HKR,"ScsiPort","TotalSenseDataBytes",0x00010001,0xFF
[qlsdm_Registry_Update]
HKLM,SOFTWARE\SNIA\HBA\QL2X00,LibraryFile,0x00000000,"%11%\qlsdm.dll"
[ql2300_Inst.Services]
AddService = ql2300, %SPSVCINST_ASSOCSERVICE%, ql2300_Service_Inst, Miniport_EventLog_Inst
[ql2300_Service_Inst]
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_BOOT_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\ql2300.sys
LoadOrderGroup = SCSI Miniport
AddReg = pnpsafe_pci_addreg
[CoCopyINF.AddReg]
HKR,,CoInstallers32,0x10000,"cocpyinf.DLL,CoCopyINF"
[CoCopyINF.CopyFiles]
cocpyinf.dll,,,0x10
[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001
[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg
[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,%%SystemRoot%%"\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7
[Strings]
QLOGIC = "QLogic"
ql2300.DeviceDesc = "QLogic QLA23xx PCI Fibre Channel Adapter"
Floppy_Desc = "QLogic Software Diskette"
;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER = 1
SERVICE_BOOT_START = 0
SERVICE_ERROR_NORMAL = 1
REG_EXPAND_SZ = 0x00020000
REG_DWORD = 0x00010001
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.