2 Server: NetWare 3.12 & 4.10 servers NetWare* 3.12 and 4.10 Server Driver Installation Notes ======================================================= Location of driver: \NWSERVER\E100B.LAN (ODI Assembly Specification version 3.3) Location of NLMs: Novell's automated services (LANDR9.EXE or greater) NOTE: LANDRx.EXE is a Novell archive that contains the latest server NLMs and support files. The x in LANDRx.EXE is subject to change with each new release of the archive. These instructions are for use with the ODI Assembly Specification v3.30 NLMs. The \NWSERVER\E100B.LAN driver on this disk is written to this specification. To load the driver on NetWare 4.10 or 3.12 requires updated ETHERTSM, MSM and the new NBI.NLM. Obtain these files from Novell's automated services. For NetWare 4.10: NBI.NLM (ver 1.49, 08/30/96 or newer) MSM.NLM (ver 3.18, 08/22/96 or newer) ETHERTSM.NLM (ver 3.11, 07/03/96 or newer) For NetWare 3.12: NBI31X.NLM (ver 1.49, 08/30/96 or newer) MSM31X.NLM (ver 3.18, 08/22/96 or newer) ETHERTSM.NLM (ver 3.11, 07/03/96 or newer) Note: NBI.NLM (or NBI31X.NLM) must be loaded before MSM and ETHERTSM. NetWare 3.12 needs MSM31X.NLM renamed to MSM.NLM. Sample load commands ==================== LOAD C:<PATH>\E100B SLOT=n FRAME=ETHERNET_802.2 BIND IPX TO E100B NET=xxxxxxxx General Instructions ==================== 1 Install NetWare 3.12 or 4.10 according to the NetWare instructions. 2 Copy the PRO/100+ server driver (\NWSERVER\E100B.LAN) and any updated NLMs, to the NetWare server's hard drive. If you can't log in to the server (before starting the server) copy the E100B.LAN driver from the \NWSERVER directory on the Configuration and Drivers disk to the root directory of the server's hard drive. If you can log into the server, copy the driver to the SYSTEM subdirectory. If you do this, you won't need to specify a path on the load line. If you copy it to another directory, make sure the LOAD statement includes the correct path. 3 Start the server. At the server console, load NBI, MSM and ETHERTSM (for NetWare 3.12 load NBI31X, MSM31X and ETHERTSM) in this order. Next, load and bind the server driver as follows: LOAD C:<PATH>\E100B SLOT=x FRAME=ETHERNET_802.2 BIND IPX TO E100B NET=xxxxxxxx Where: SLOT=x Specifies the NBI (NetWare Bus Interface) slot number. Substitute x with the valid value for the adapter. You will be prompted with the slot number(s) of installed PRO/100+ adapters. The NBI numbers are different from the slot number indicated in the SETUP.EXE utility. NET=xxxxxxxx is the unique network address for that LAN segment. The default frame type is 802.2. If your workstation needs to use the 802.3 frame type, see the section later in this document about using multiple frame types on one adapter. 4 Add the load and bind statements you need to the server's AUTOEXEC.NCF file so the PRO/100+ adapter driver loads automatically each time the server starts. Hints and tips -------------- 1 If the error message MSGetPhysical is encountered: Upgrade the ETHERTSM.NLM and MSM31x.NLM and be sure to rename MSM31x.NLM to MSM.NLM 2 Installing multiple adapters: If you have multiple adapters in a single server, each adapter must have a different NET number and SLOT number. Also, you may want to name each adapter. For example: LOAD C:\E100B SLOT=3 NAME=LAN_A BIND IPX TO LAN_A NET=222 LOAD C:\E100B SLOT=4 NAME=LAN_B BIND IPX TO LAN_B NET=333 3 If you have problems loading the driver on multiple adapters and the initialization fails due to "Insufficient RCBs," increase the number of buffers allocated to the server. Add the following to STARTUP.NCF: SET MINIMUM PACKET RECEIVE BUFFERS = 100 (or larger) SET MAXIMUM PACKET RECEIVE BUFFERS = 500 (or larger) The MINIMUM value you specify must be at least 30 times the number of PRO/100+ adapters in the computer. Recommended settings: 1-3 adapters: 100 4 adapters: 150 The MAXIMUM you can specify depends on the amount of memory in the server, but it must be greater than the MINIMUM. 4 Installing one adapter with multiple frame types: When binding multiple frame types to one adapter, enter a LOAD and BIND statement for each frame type. Each LOAD statement uses the same SLOT number, but each BIND statement needs a unique network number. You must also include a name on each load line to avoid being prompted for the adapter to bind IPX to. Example: LOAD C:\E100B SLOT=3 FRAME=ETHERNET_802.3 NAME=LAN8023 BIND IPX TO LAN8023 NET=77777 LOAD C:\E100B SLOT=3 FRAME=ETHERNET_802.2 NAME=LAN8022 BIND IPX TO LAN8022 NET=88888 5 Optional LOAD line parameters. See the NetWare Server Parameters readme (NWPARAM.TXT) for additional information. * Third-party trademarks are the property of their respective owners.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.