oemsetup.inf Driver File Contents (i23scsi32v82366.zip)

; OEMSETUP.INF - This file is used by Setup to install QLA23xx Windows Server 2003/2000 SCSI PnP Miniport Driver
; Copyright 1996-2003 QLogic Corporation 

[version]
signature="$Windows NT$"
Class=SCSIAdapter
ClassGUID={4D36E97B-E325-11CE-BFC1-08002BE10318}
Provider=%QLOGIC%
CatalogFile=ql2300.cat
DriverVer=02/20/2004,8.2.3.66

[SourceDisksNames]
1=%Floppy_Desc%,,,


[SourceDisksFiles]
ql2300.sys=1
qlsdm.dll=1
cocpyinf.dll = 1

[DestinationDirs]
ApiFileList = 11
DefaultDestDir = 12 ; DIRID_DRIVERS
CoCopyINF.CopyFiles = 11

[ApiFileList]
qlsdm.dll


[Manufacturer]
%QLOGIC%=QLOGIC

;*******************************
;QLogic Manufacturer device list
[QLOGIC]
%ql2300.DeviceDesc% = ql2300_Inst, PCI\VEN_1077&DEV_2300&SUBSYS_00091077, PCI\VEN_1077&DEV_2312&SUBSYS_00091077, PCI\VEN_1077&DEV_2312&SUBSYS_01001077, PCI\VEN_1077&DEV_2312&SUBSYS_01011077, PCI\VEN_1077&DEV_2312&SUBSYS_01021077, PCI\VEN_1077&DEV_2312&SUBSYS_01031077, PCI\VEN_1077&DEV_2312&SUBSYS_01091077, PCI\VEN_1077&DEV_2312&SUBSYS_011A1028, PCI\VEN_1077&DEV_2312&SUBSYS_013B1028, PCI\VEN_1077&DEV_2312&SUBSYS_013C1028, PCI\VEN_1077&DEV_2312&SUBSYS_027D1014,  PCI\VEN_1077&DEV_2312&SUBSYS_01000E11, PCI\VEN_1077&DEV_2312&SUBSYS_01010E11, PCI\VEN_1077&DEV_2312&SUBSYS_01020E11, PCI\VEN_1077&DEV_2312&SUBSYS_12BA103C, PCI\VEN_1077&DEV_2312&SUBSYS_12C2103C, PCI\VEN_1077&DEV_2312&SUBSYS_34BA8086,  PCI\VEN_1077&DEV_2312&SUBSYS_01021749


[ControlFlags]
ExcludeFromSelect = PCI\VEN_1077&DEV_2300&SUBSYS_00091077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_00091077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01001077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01011077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01021077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01031077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01091077
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_011A1028
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_013B1028
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_013C1028
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_027D1014
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01000E11
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01010E11
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01020E11
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_12BA103C
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_12C2103C
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_34BA8086
ExcludeFromSelect = PCI\VEN_1077&DEV_2312&SUBSYS_01021749


[ql2300_Inst]
CopyFiles = @ql2300.sys
CopyFiles = ApiFileList
AddReg  = ql2300_Registry_Update
AddReg  = qlsdm_Registry_Update
CopyInf = qlpseudo.inf


[ql2300_Inst.CoInstallers]
AddReg    = CoCopyINF.AddReg
CopyFiles = CoCopyINF.CopyFiles

[ql2300_Inst.HW]
AddReg  = ql2300_AddReg.HW

[ql2300_Registry_Update]
HKLM,SYSTEM\CurrentControlSet\Services\ql2300\Parameters\Device,DriverParameters,0x00000000,"UseSameNN=1;buschange=0"
HKLM,SYSTEM\CurrentControlSet\Services\ql2300\Parameters\Device,MaximumSGList,0x00010001,0x41
HKLM,SYSTEM\CurrentControlSet\Services\ql2300\Parameters\Device,NumberOfRequests,0x00010001,0x96
HKLM,SYSTEM\CurrentControlSet\Services\Disk,TimeOutValue,0x00010001,0x3C

[ql2300_AddReg.HW]
HKR,"ScsiPort","TotalSenseDataBytes",0x00010001,0xFF

[qlsdm_Registry_Update]
HKLM,SOFTWARE\SNIA\HBA\QL2X00,LibraryFile,0x00000000,"%11%\qlsdm.dll"



[ql2300_Inst.Services]
AddService = ql2300, %SPSVCINST_ASSOCSERVICE%, ql2300_Service_Inst, Miniport_EventLog_Inst

[ql2300_Service_Inst]
ServiceType    = %SERVICE_KERNEL_DRIVER%
StartType      = %SERVICE_BOOT_START%
ErrorControl   = %SERVICE_ERROR_NORMAL%
ServiceBinary  = %12%\ql2300.sys
LoadOrderGroup = SCSI Miniport
AddReg         = pnpsafe_pci_addreg

[CoCopyINF.AddReg]
HKR,,CoInstallers32,0x10000,"cocpyinf.DLL,CoCopyINF"

[CoCopyINF.CopyFiles]
cocpyinf.dll,,,0x10


[pnpsafe_pci_addreg]
HKR, "Parameters\PnpInterface", "5", 0x00010001, 0x00000001

[Miniport_EventLog_Inst]
AddReg = Miniport_EventLog_AddReg

[Miniport_EventLog_AddReg]
HKR,,EventMessageFile,%REG_EXPAND_SZ%,%%SystemRoot%%"\System32\IoLogMsg.dll"
HKR,,TypesSupported,%REG_DWORD%,7

[Strings]
QLOGIC = "QLogic"
ql2300.DeviceDesc = "QLogic Fibre Channel Adapter"
Floppy_Desc = "QLogic Software Diskette"


;*******************************************
;Handy macro substitutions (non-localizable)
SPSVCINST_ASSOCSERVICE = 0x00000002
SERVICE_KERNEL_DRIVER  = 1
SERVICE_BOOT_START     = 0
SERVICE_ERROR_NORMAL   = 1
REG_EXPAND_SZ          = 0x00020000
REG_DWORD              = 0x00010001
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.79