1. SP2020.zip Driver
2. PWLAN.TXT File Contents

PWLAN.TXT Driver File Contents (SP2020.zip)

		ISA  NE-Series Ethernet Adapter
		 Power Lan driver Installation
		===============================


To install this adapter with Power Lan system, user
can use 3 different methods as following:

      A) Install Power Lan driver with the NE-Series adapter

      B) Install DOS/ODI drivers for Power Lan

      C) Install Packet drivers for Power Lan


A) Install Power Lan Driver with the NE-Series adapter
   ===================================================

   To install Power Lan driver with this adapter

   1.) Use Power Lan install program, and select "NE2000" item.

   2.) Change Iobase and IRQ setting by SETUP program
       and using the same port at NXNE2000 command line parameter:
       /lp:Iobase /li:IRQ

   Example  -----  PLSTART.BAT

       if %PLTREE%. == . set PLTREE=C:\PL
       REM
       REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
       REM
       %PLTREE%\PROGRAMS\nxne2000  /ln:0 /ses:14 /nam:17 /lp:300 /li:3
       REM


B) Install DOS/ODI driver for Power Lan
   =============================================

   To install DOS/ODI driver at Power Lan system:

   1.) Copy DOS/ODI driver "NWMLID.COM from A:\NETWARE\ODI\DOSODI
       to C:\PL\PROGRAMS

   2.) Copy Novell's driver "LSL.COM from A:\NETWARE\ODI\DOSODI to
       C:\PL\PROGRAMS

   3.) Create NET.CFG file as following example at C:\PL\PROGRAMS

   4.) Use Power Lan install program, and select "ODI" item,
       then add "LSL.COM" and "NWMLID.COM" before NXODI.EXE
       at C:\PL\ADMIN\SYS\PLSTART.BAT's "start NETBIOS" section


   Example  -----  PLSTART.BAT

       if %PLTREE%. == . set PLTREE=C:\PL
       REM
       REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
       REM
       LSL
       %PLTREE%\NWMLID		    ------> DOS/ODI driver
       %PLTREE%\PROGRAMS\nxodi	/ln:0 /ses:14 /nam:17
       REM

   Example  -----  NET.CFG

       Link Driver NWMLID
	      Frame ETHERNET_II
	      Protocol IPX  8137 ETHERNET_II
	      Port 300
	      INT 3



C) Install Packet driver for Power Lan
   =============================================

   To install packet driver at Power Lan system:

   1.) Copy packet driver "NWPD.COM" from A:\PKTDRV to
       C:\PL\PROGRAMS

   2.) Use Power Lan install program, and select "NXPACKET" item,
       then add packet driver "NWPD.COM" before NXPACKET.EXE
       at C:\PL\ADMIN\SYS\PLSTART.BAT's "start NETBIOS" section


   Example  -----  PLSTART.BAT

       if %PLTREE%. == . set PLTREE=C:\PL
       REM
       REM - - - - - - - - - - - - - - - - - - Start NETBIOS - - - - - - - - - - - -
       REM
       %PLTREE%\NWPD 0x60	    ------> packet driver
       %PLTREE%\PROGRAMS\nxpacket  /ln:0 /ses:14 /nam:17 /li:0x60



-- THE END --


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.