Release Notes Driver Name : QLogic Fibre Channel ScsiMiniport Driver Version : 9.0.2.12 Date : 04/07/2005 OS platform : Windows Server 2003/Windows 2000 FW version : 3.03.13 IPX Table of Contents I. Overview II. Enhancements III. Bug Fixes IV. Known Issues V. Additional Information I. Overview The following document provides details of QLogic's Fibre Channel ScsiMiniport driver changes between version 9.0.1.12 and 9.0.2.12. II. Enhancements 9.0.2.12 QL 3.03.13 - 04/07/05 * RISC code 3.03.13 Fix DFCT140706 (9.0.1.13/14 3.3.12) - FW dump 8002/1BC2/1B9C during the path failure test (run I/Os and disconnect one cable from the HBA to the switch) on 2 Guadalupe systems. The 8002 error is caused by the ownership of an exchange was not picked up by receive sequencer on time. 9.0.1.14 QL 3.03.12 - 02/28/05 * RISC code 3.03.12 * Add support for AMD29LV40, ST M29W040, and Macronix MX29LV040 flash chips * Add full support of Emphasis and Swing for 2312/2322 * Add flash support for Macronix and Guadalupe 9.0.1.13 QL 3.03.08 - 01/05/05 * RISC code 3.03.08 * Add full support of Emphasis and Swing for 2312/2322 * Add flash support for Macronix and Guadalupe III. Bug Fixes 9.0.2.11 QL 3.03.12 - 03/08/05 * Fix mark device offline issue * Fix the driver to detect VSA target using valid data buffer 9.0.2.10 QL 3.03.12 - 03/04/05 * Fix device scan issue in loop environment 9.0.1.14 QL 3.03.12 - 02/28/05 * Close OPT200955/20356 - v9.0.1.12 Driver is incorrectly displaying the data buffer content (for debug purpose) for the OEM specific Scsi Passthrough I/O request even an error is being reported, causing invalid memory access * Close ER40280 - Unable to get back all configured devices (targets) after a cable pull and reinsertion on a Switch with 9 targets attached. 9.0.1.13 QL 3.03.08 - 01/05/05 * Close rQm 263595: QLogic driver only returns partial data on some Rubah passthrough commands * Close Er39380: Loopback test fails on qla2360 HBA * Fix firmware load logic IV. Known Issues None. V. Additional Information None.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.