QMSJ Application Notes 4/7/03 1. For information on installation instructions and options make sure to review the QMSJ user's guide. 2. The default QMSJ write operation password is "config". Make sure to change this password after install to ensure security is not compromised. 3. Make sure that if a previous version of QMSJ is installed run the uninstall before upgrading. 4. ** Note the TCP/IP transport will have to be loaded to talk to the QMSJ agent. ** 4.2 Netware systems do not come with the TCPIP protocol loaded by default make the following modifications to the AUTOEXEC.NCF: LOAD TCPIP LOAD <ethernet card> SLOT=<slot> FRAME=ENTERNET_II NAME=<name> BIND IP <name> ADDR=<ip address> MASK=<mask> LOAD SCMD /BS 5. Operation of QMSJ on NetWare 6.x servers requires that the network protocol IPX/SPX be installed. 6. After the Novell Netware agent installation is complete one must start the QMSJ agent by doing one of the following: A. reboot the Netware server that the agent was installed on. B. type the following on the Netware server console that the agent was installed on: RPCSTART LOAD QLREMOTE.NLM *** Note this assumes you have already loaded the QLogic Novell Netware HAM driver *** 7. The QMSJ online web help can only be viewed by Internet Explorer (version 4.0 or greater) or Netscape Communicator (version 4.5 or greater). 8. The QMSJ application tries to help in not allowing the user to connect to the same host more than once (causes issues with policies and wasted system resources). This adds the requirement that all host IP address MUST resolve to a host name to allow connection to complete. If DNS is not used you must edit the local host file on the system where you are running the QMSJ GUI and add the host name to IP mapping manually. NT: <install drive>:\\winnt\\system32\\drivers \\etc\\hosts Netware: SYS:ETC\\HOSTS 9. The File Choosers in QMSJ at times does not respond to double click traversal of the file system. The work around for now is select the directory and click the Open button to the right to traverse the directory or open a specific file. 10. On Netware 4.2 the IP Address and Hostname information can't be retrieved to be displayed in the 'Novell Netware Disk Selection' step of the application install. Only the drive letter will be displayed. 11. On Netware the following modification to CONFIG.SYS is required to run QMSJ. In CONFIG.SYS file on NetWare server boot drive: FILES = 100 BUFFERS = 50 12. The video resolution must be set to 256 colors or higher to run the QMSJ GUI. 13. During the uninstall of QMSJ from a Netware server the following message: 'Can not stat sys:etc/rpcnet.cfg' will be displayed at the server's prompt. This does not affect the operation of the Netware server and can be ignored. 14. The administrator account password must not be blank when changing the QMSJ application password. This is a Windows 2003 security restriction.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.