1. 6820u10edos3195nt40nw312.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (6820u10edos3195nt40nw312.zip)

                ÚÄÄÄÄÄÄÄ ACARD SCSI-2 UTILITY ÄÄÄÄÄÄÄ¿
                ³    ACARD SCSI-2 NetWare Driver     ³
                ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ

 NET6820.DSK suport NetWare 386 v3.1x and v4.0 SCSI-2 disk module
 and ASPI managers. ACARD SCSI-2 netware driver have full support for
 standard SCSI disk drives, 'NetWare Ready' drives, and removable media
 disk drives (including optical drives).

 NET6820.DSK also contain a built-in ASPI manager.  This allows for other
 NetWare Loadable Modules (NLMs) to gain access to the SCSI-2 host adapter.
 NET6820.DSK compatible with built-in SCSI driver which are CDROM.nlm,
 ASPITRAN.DSK and ASPICD.DSK.


 :load ATP850S



Example <A>
  OS       : Netware 3.12(Diskette)
  System   : 486-66 with 8 MB memory
  Fdd      : 1.44 MB(Drive A)
  Hdd      : 1.2 GB (Drive C)
  LAN Card : WD8003 compatible Ethernet
  *Install procedure :
     1. Make a small DOS partiton(20 MB).
     2. Make a directory c:\server.312
     3. Copy ACARD SCSI-2 driver to directory c:\server.312 .
     4. copy  ASPITRAN.DSK to
        directory c:\server.312
     5. copy lan driver WD31.lan to c:\server.312
     5. Insert Netware 3.12 Install Diskette and Run Install from Drive A:
     6. Follow Netware 3.12 procedure then into Netware Command line prompt.
     7. Load NET6820.DSK from Drive c:\netware.312\NET6820.DSK .
          :load c:\netware.312\ATP850S <Enter>
     8. Load Lan driver WD31.lan
          :load c:\netware.312\wd31
          :bind ipx to wd31
     9. Load Install
    10. Partiton a Netware partition.
    11. Create a Netware SYS: volume  and mount SYS:.
    12. Follow Netware Installation guide
        Copy Netware System file and utility
    13. Create file Startup.ncf and autoexec.ncf
    14. Make sure load ASPICD.DSK and CDROM.nlm in autoexec.bat
        not in startup.ncf.


Example <B>
  OS       : Netware 4.00(CDROM)
  System   : 486-66 with 16 MB memory
  Fdd      : 1.44 MB(Drive A)
  Hdd      : 1.5 GB (Drive C)
  CDROM    : SONY CDU-521(Drive D on ACARD SCSI-2)
  LAN Card : NE2000 compatible Ethernet

     1. Make a small DOS partiton(20 MB).
     2. Make a directory c:\server.40
     3. Install CDROM drive as a MSDOS drive D:
     4. Insert Netware 4.0 CDROM diskette.
     5. Copy ACARD SCSI-2 driver to directory c:\server.40
     6. copy CDNASPI.DSK and ASPITRAN.DSK(D:\netware.40\________\diskdrv\)
        to  directory c:\server.40
     7. Change directory to D:\netware.40\________\c_03c\) then copy
        CDROM.NLM to c:\server.40
     8. Change directory to \netware.40\english then run INSTALL.BAT
     9. Give server name and IPX number then follow install guide.
    10. Select Load another(different) driver then press <Ins>,<F3>
        select directory c:\server.40
        then select NET6820.DSK
    12. Then continue to install.
    13. Then Select automatically to install Hdd partition.
    14. Select <F10> to save Volume.
    15. Then you need insert [LICESE] floppy diskette.
    16. Select <Alt><F10> exit to Netware command prompt.
    17. Load c:\server.40\CDNASPI
    18. Load c:\server.40\CDROM then must remember CDROM drive no.
    19. Run CD MOUUNT 1 then remember CDROM volume name(CDVOL01) and
        *** Don't care any CDROM error message.
    20. Load c:\netware.40\instll
    21. Select Install a new V4.0 server.
    22. Select <F3> to enter Directory CDVOL01:\netware.40\english
    23. Follow Novell install guide to continue next procedure.
    24. Make sure load CDNASPI.DSK and CDROM.nlm in autoexec.bat
        not in startup.ncf.