Information and Instructions about this download file ======================= File Description: Universal Serial Bus Version 2.0 Drivers Version: 5.1.2600.41 Operating System: Microsoft(r) Windows(r) XP Part Number: 7513005/9519840 Date: 04/01/2002 ======================= Table of Contents ======================= Overview Identification Installation Removal Troubleshooting Reason for Update Applicable Part Numbers ======================= Overview This driver package contains both the USB 2.0 Enhanced Host Controller Interface (EHCI) drivers and the QFE fix for existing USB drivers in Windows XP. Both packages need to be installed to support USB 2.0 on Windows XP. Installation of this update is not required if Windows XP Service Pack 1 has been installed. Identification If the computer is a Profile 4 or the 400VTX portable computer, this is the correct driver. To confirm that this is the correct USB 2.0 driver update for your desktop computer, perform the following steps. If the computer is turned off: 1. Turn on the computer. On your keyboard, repeatedly press the F1 key to enter the BIOS Setup Utility. 2. In the BIOS Setup Utility, on the Main tab, look for the BIOS version line. The version needs to read RG84510A.xxx.xxxx.Pxx (where x is variable characters). The BIOS prefix RG84510A is constant and specifically identifies the correct motherboard. 3. If this is correct, this is the correct USB driver for your computer. Press the F10 key to exit the BIOS Setup Utility. If the computer is turned on and in Windows: 1. From the Start menu, click Shut Down. In the Shut Down Windows dialog box, select Restart, and then click Yes. 2. As soon as the computer restarts, on your keyboard, repeatedly press the F1 key to enter the BIOS Setup Utility. 3. In the BIOS Setup Utility, on the Main tab, look for the BIOS version line. The version needs to read RG84510A.xxx.xxxx.Pxx (where x is variable characters). The BIOS prefix RG84510A is constant and specifically identifies the correct motherboard. 4. If this is correct, this is the correct USB driver for your motherboard. Press the F10 key to exit the BIOS Setup Utility. Installation The following instructions are written specifically for this driver package with the Windows XP operating system already installed. 1. After downloading and double-clicking the 7513005.exe file, the needed files are extracted into the C:\Cabs\7513005 folder. 2. From the Start menu, click Control Panel. 3. In Control Panel, click Performance and Maintenance. 4. In the Performance and Maintenance window, click System. 5. In the System Properties dialog box, click the Hardware tab, and then click Device Manager. 6. In Device Manager, under Other Devices, double-click the Universal Serial Bus (USB) Controller. Note: If other USB drivers were previously installed, the USB Controller may be listed under System Devices. Double-click it. 7. In the Universal Serial Bus (USB) Controller Properties dialog box, click the Driver tab, and then click Update Driver. 8. In the Hardware Update Wizard dialog box, select Install the software automatically (Recommended), and then click Next. Note: If the next Hardware Update Wizard reports: Cannot Continue the Hardware Update Wizard, this version of the driver is either an earlier version or is the same version that is currently installed. Click Finish. 9. In the Completing the Hardware Update Wizard dialog box, click Finish. 10. In the Intel PCI to USB Enhanced Host Controller Properties dialog box, click Close. 11. Close Device Manager. 12. Close the System Properties dialog box. 13. Close the Performance and Maintenance window. 14. From the Start menu, click Run. 15. In the Run dialog box, in the Open text box, type: C:\Cabs\7513005\Q312370EN.exe. Click OK. 16. In the Welcome to the Windows XP Q312370 Setup Wizard dialog box, click Next. 17. In the Completing the Windows XP Q312370 Setup Wizard dialog box, click Finish. 18. The computer restarts automatically. Removal Removal of the USB 2.0 drivers is not recommended because doing so may cause some USB devices not to be recognized and installed by the operating system. The Windows XP Hotfix Q312370 can be removed through Add or Remove Programs, available in Control Panel. However, if the USB 2.0 drivers remain installed, removal of the hotfix is not recommended. Troubleshooting If you have difficulties installing this update, download the file again, and then ensure that all instructions in this document are followed. Reason for Update This is the initial USB 2.0 Windows XP supplement qualified for the Profile 4 computer, the 400VTX portable computer, for some of the Gateway 300 and 500 series computers, and the Gateway E-2000 and E-4000 computers. Applicable Part Numbers Essex motherboard (E-4000): 2516231, 2516232, 2516233, 2516234, 2516235, 2516236, 2516237, 2516238, 2516239, 2516240, 2516241, 2516242, 2516852, 2516853, 2516854, 2517116, 2517172, 2517173, 2517174, 2517175, 2517176, 2517177, 2517178, 2517179, 2517180, 2517181, 2517182, 2517183, 2517208, 2517209, 2517210, 2517510, 2517511, 2517512, 2517639, 2517642, 2517865, 2517868, 2517936, 2517942, 2517948, 2517953, 2518301, 2518554, 2518892, 2519530, 2519531, 2520534, 2520679, 2520681, 2520684, 2520773 Essex B Step motherboard: 2518943, 2518944, 2518946, 2518947, 2518948, 2518949, 2518950, 2518951, 2518952, 2518953, 2518954, 2519058, 2519067, 2519074, 2519079, 2519084, 2519091, 2519101, 2519150, 2519366, 2519411, 2519567, 2519568, 2519569, 2519570, 2519571, 2519572, 2519573, 2519574, 2519575, 2519576, 2519577, 2519578, 2519579, 2519580, 2519581, 2519582, 2519583, 2519614, Nimitz motherboard (E-2000): 2516275, 2516276, 2516277, 2516278, 2516280, 2516281, 2516282, 2516494, 2516496, 2516497, 2516498, 2517119, 2517184, 2517185, 2517186, 2517187, 2517188, 2517189, 2517190, 2517196, 2517197, 2517198, 2517199, 2517815, 2517938, 2517943, 2517949, 2517955, 2518050, 2518936, 2518938, 2518939, 2519073, 2519529, 2520678, 2520774 Nimitz B Step motherboard: 2518936, 2518937, 2518938, 2518939, 2518940, 2518941, 2519024, 2519057, 2519066, 2519100, 2519365, 2519610, 2519626, 2519729, 2519730, 2519731, 2519732, 2519733, 2519734, Profile 4 computers: 2900557, 2900558, 2900559, 3501291, 3501314, 3501398, 3501399, 3501400, 3501401, 3501425, 3501426, 3501442, 3501443, 3501610, 3501636, 3501637 400VTX notebook computers: 3501331, 3501335, 3501337, 3501341Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.