pa1_hct.ini Driver File Contents (9524859.exe)

# Generated by UJ Circuit Analyzer
# Friday, September 26, 2003 - 3:58:52 PM
# StacSrv version 4167
# Driver version 4167
[Models]
;all MODEL files (except perhaps STAC97.ini) should have a self-reference here.
;self-reference:
PCI\VEN_8086&DEV_24D5&subsys_0601107B = this

[DelRegKeys]
# Specify the registry keys to be deleted during Uninstall
HKCU\Software\Sigmatel\Settings=Yes		; Delete the current user's settings subkey
HKCU\Software\Sigmatel\JackSense=Yes		; Delete the current user's jacksense subkey
HKCU\Software\Sigmatel\JackSense2=Yes		; Delete new user key
HKLM\Software\Sigmatel\JackSense2=Yes		; both of them
HKR\Settings=Yes		; Delete the driver's settings subkey
HKR\JackSense=Yes		; Delete the driver's jacksense subkey

# The following 2 keys cause the volume settings to be 'forgotten' during Uninstall
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes
HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes

[Apps]
# Specify the application software to install
TinyUJ2                   = No
SSWiz                     = Yes
StacSysTray               = Yes
StacIt                    = Yes
PassThru                  = YesInvisible

# The following keys are used by StacSrv.application
[HKLM\Software\SigmaTel\Jacksense2]
RegistryVersionNum        = dword: 0x1		; Newer registry format based on jacks, not pins
PollingPeriod             = dword: 333		; 333 millliseconds
JSOscFreq                 = dword: 16000		; Set jacksense oscillator frequency to 16kHz
DockSupport               = dword: 1		; Bios Interface dock support

# Policies
PolicyHPMuteSpkrs         = dword: 0x1FF		; Plugging in any headphones mutes all speakers
#PolicyDefaultBassMgmt  = dword: 1         ; 1 = Enable 2.1 bass management at startup
#PolicyOnly1Input       = dword: 0x01ff    ; For multiple codecs
PolicyMicInsertSelect     = dword: 0x1FF		; Inserted Mic gets selected.
PolicySpkrMuteSpkrs       = dword: 0x100
PolicyConfigurator        = dword: 1		; Use Master Configuratator of the Universe

# Specify whether to route Line-Out/Front directly from Dac A or from the Analog Mixer
# The JackSense registry key "DigitalModel" should always be specified and set to Dword:1 
# in harmony w/ the driver setting EmulateAllMasters (binary) 01

DisableAnalogMixer        = dword: 1		; 1 = Dac A, 0 = mixer

# The following keys specify the number of different setups displayed
# by the Jack Sharing applet, and the mode that they support.  This will
# subsequently effect the menu item displayed by the Jack Sharing applet.
# Typically 4 modes used are 2 (Headphones), 4 (Stereo Speakers), 5 (Quad), and 7 (5.1)

#    0 = None
#    1 = Mono Speaker
#    2 = Headphones
#    3 = Stereo Speakers (narrow)
#    4 = Stereo Speakers (wide)
#    5 = Quadraphonic (4 channel)
#    6 = Surround (4 channel)
#    7 = 5.1 Surround (6 channel)
#    All other values are invalid

NumSpkrSetups             = dword: 0x0		; The number of setups defined.

#
# This section is used to change the default
# name of the jack panels
[HKLM\Software\Sigmatel\JackSense2\PanelLabels]
Panel1                    = "SidePanel"		; This is AC97JackLocationCode 1 = jlFrontPanel

#default Values
#Panel0 = "Rear Panel"
#Panel1 = "Front Panel"               ; or Side Panel as in above for Piranha
#Panel2 = "Internal"                  ; or Motherboard
#Panel3 = "Dock"
#Panel4 = "Reserved"                  ; 4 thru 7 are reserved for future use or definition by AC97.

# The following sections define which pins are connected to jacks
# Each pin will have properties associated with it such as the color of the jack,
# where it is located, and which mode (front, rear, center/lfe) to select when a
# speaker is plugged in and autoconfigure is set.

# DefaultSpeakerMode specifies which channels to configure if JackSense is
#  active and AutoConfigure is set and speakers are plugged into the jack

[HKLM\Software\Sigmatel\JackSense2\Codec2]
GpioMuxIndex              = dword: 5		;  controls the mux
GpioMuxType               = dword: 0


################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack1]          ;  0 : 0 - Front Panel Pink Jack
JackColor                 = dword: 10		;Pink
JackLocation              = dword: 1		;Front Panel
JackPanelOrder            = dword: 1		; 0
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 0		;Pins35/36
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 1		;jsMic
GpioSwitch                = dword: 3		;JackSwitch GPIO = GPIO 3
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0		; Inverted
MicBias                   = dword: 1		;Mic Bias GPIO = GPIO 1
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 1		;True
SupportedDevices          = dword: 0x77		; - jsNone - jsMic - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: -1		;True
FiveOhmResistorPresent    = dword: -1		;True
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: -1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack2]          ;  0 : 1 - Front Panel Green Jack
JackColor                 = dword: 5		;Green
JackLocation              = dword: 1		;Front Panel
JackPanelOrder            = dword: 2		; 1
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 1		;Pins39/41
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 2		;jsPwrSpkr
GpioSwitch                = dword: 5		;JackSwitch GPIO = GPIO V
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 1		; Not Inverted
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x7D		; - jsNone - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 3		;100 uF 25V Alum
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack3]          ;  0 : 2 - Front Panel Gray Jack
JackColor                 = dword: 8		;Gray
JackLocation              = dword: 1		;Front Panel
JackPanelOrder            = dword: 3		; 2
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 7		;Pins23/24
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 4		;jsLineIn
GpioSwitch                = dword: 6		;JackSwitch GPIO = GPIO X
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0		; Inverted
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x1F5		; - jsNone - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE - jsSpdifIn - jsSpdifOut
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack4]          ;  1 : 3 - Dock Blue Jack
JackColor                 = dword: 6		;Blue
JackLocation              = dword: 3		;Dock
JackPanelOrder            = dword: 4		; 3
ParentCodecIndex          = dword: 1		;1
PinIndex                  = dword: 7		;Pins23/24
DefaultSpeakerMode        = dword: 5		;jsSurround
PinConfiguration          = dword: 0		;jsNone
GpioSwitch                = dword: 2		;JackSwitch GPIO = GPIO 2
GpioMux                   = dword: 0		;Mux State 0
GPIOInverted              = dword: 0		; Inverted
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x75		; - jsNone - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack5]          ;  1 : 4 - Dock Pink Jack
JackColor                 = dword: 10		;Pink
JackLocation              = dword: 3		;Dock
JackPanelOrder            = dword: 5		; 4
ParentCodecIndex          = dword: 1		;1
PinIndex                  = dword: 0		;Pins35/36
DefaultSpeakerMode        = dword: 6		;jsCenterLFE
PinConfiguration          = dword: 1		;jsMic
GpioSwitch                = dword: 3		;JackSwitch GPIO = GPIO 3
GpioMux                   = dword: 1		;Mux State 1
GPIOInverted              = dword: 0		; Inverted
MicBias                   = dword: 1		;Mic Bias GPIO = GPIO 1
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 1		;True
SupportedDevices          = dword: 0x77		; - jsNone - jsMic - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: -1		;True
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack6]          ;  1 : 5 - Dock Green Jack
JackColor                 = dword: 5		;Green
JackLocation              = dword: 3		;Dock
JackPanelOrder            = dword: 6		; 5
ParentCodecIndex          = dword: 1		;1
PinIndex                  = dword: 1		;Pins39/41
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 2		;jsPwrSpkr
GpioSwitch                = dword: 2		;JackSwitch GPIO = GPIO 2
GpioMux                   = dword: 1		;Mux State 1
GPIOInverted              = dword: 0		; Inverted
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x7D		; - jsNone - jsPwrSpkr - jsHeadphone - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 3		;100 uF 25V Alum
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack7]          ;  1 : 6 - Dock Black Jack
JackColor                 = dword: 0		;Black
JackLocation              = dword: 3		;Dock
JackPanelOrder            = dword: 7		; 6
ParentCodecIndex          = dword: 1		;1
PinIndex                  = dword: 5		;Pins21/22
DefaultSpeakerMode        = dword: 5		;jsSurround
PinConfiguration          = dword: 5		;jsSurround
GpioSwitch                = dword: 3		;JackSwitch GPIO = GPIO 3
GpioMux                   = dword: 0		;Mux State 0
GPIOInverted              = dword: 0		; Inverted
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x75		; - jsNone - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack8]          ;  1 : 7 - Dock Orange Jack
JackColor                 = dword: 3		;Orange
JackLocation              = dword: 3		;Dock
JackPanelOrder            = dword: 8		; 7
ParentCodecIndex          = dword: 1		;1
PinIndex                  = dword: 2		;Pins43/44
DefaultSpeakerMode        = dword: 6		;jsCenterLFE
PinConfiguration          = dword: 6		;jsCenterLFE
GpioSwitch                = dword: 4		;JackSwitch GPIO = GPIO E
GpioMux                   = dword: 0		;Mux State 0
GPIOInverted              = dword: 0		; Inverted
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x75		; - jsNone - jsPwrSpkr - jsLineIn - jsSurround - jsCenterLFE
Notify                    = dword: 0x1		; - jsNone
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 2		;3.3 Ceramic
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: -1		;True
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack9]          ;  0 : 8 - Internal Amp
JackColor                 = dword: 0		;Black
JackLocation              = dword: 2		;Internal Amp
JackPanelOrder            = dword: 9		; 8
ParentCodecIndex          = dword: 0		;0
PinIndex                  = dword: 2		;Pins43/44
DefaultSpeakerMode        = dword: 2		;jsPwrSpkr
PinConfiguration          = dword: 2		;jsPwrSpkr
GpioSwitch                = dword: -1		;JackSwitch GPIO = gpioUnassociated
GpioMux                   = dword: -1		;No GPIO Crosspoint Mux
GPIOInverted              = dword: 0x1		; gpioUnassociated
MicBias                   = dword: -1		;Mic Bias GPIO = gpioUnassociated
MicBiasMode               = dword: 0		;Normal
MicBiasPolarity           = dword: 0		;False
SupportedDevices          = dword: 0x4		; - jsPwrSpkr
Notify                    = dword: 0x0		; - jsbmAllOff
AutoConfigure             = dword: 0x0		; - jsbmAllOff
AutoConfigSupport         = dword: 0x0		; - jsbmAllOff
JSAlgorithm               = dword: 1		;jsaGood
JSReadingsTotal           = dword: 30		;30
JSReadingsGood            = dword: 5		;5
DaisyChain                = dword: -1		;No Daisy Chain
OutputCapSize             = dword: 1		;1.0 uF
DirectConnect             = dword: 1		;True
FiveOhmResistorPresent    = dword: 0		;False
HasIntelFrontPanelHeader  = dword: 0		;False
ImpedanceGtrThan16k       = dword: 1		;True
IsDeviceSupported         = dword: 0		;False
IsolatedSwitch            = dword: 0		;False
NotCrossconnected         = dword: 1		;True
SameCapOnBothChannels     = dword: 1		;True

[HKR\Settings]

EmulateAllMasters         = hex: 1
DigitalMasterControlsAnalog = hex: 1
DockedIfJustCodecReady    = hex: 1
EnableLinearVolumes       = hex: 0
MakeCodecsPlayInParallel  = hex: 1
DisableCDIn               = hex: 1
MuteInactiveDac           = hex: 0
SPDIFInMute               = hex: 1
SPDIFInSharesJackWithAnalogIn = hex: 1
DisableHeadphone          = hex: 1
DisableLnlvl              = hex: 1
DisableWaveIn2            = hex: 1
DisablePCBeep             = hex: 0
DisablePhone              = hex: 1
SPDIFInSupportVariant     = 1
DisableMonoOut            = hex: 1
DisableAux                = hex: 1
DisableVideo              = hex: 1
Disable3DControl          = hex: 1
DisableMonoVirtual        = hex: 1
DisableMICSelect          = hex: 1
DisableLineInFromPlayback = hex: 1
DisableMicFromPlayback    = hex: 1
DisablePeakmeters         = hex: 1
EnableSPDIFIn             = hex: 1
MICBoost                  = hex: 1
MasterControlsAux         = hex: 1
MasterControlsMono        = hex: 1
RecMuxMuteAtFloor         = hex: 0
MICSelect                 = hex: 0
3DDepthEnable             = hex: 0
PCBeepMute                = hex: 0
PhoneMute                 = hex: 1
CDMute                    = hex: 1
VideoMute                 = hex: 1
AuxMute                   = hex: 1
EnableExtAmpControl       = hex: 0
EnableNonPCMOnWin2K       = hex: 1
EnableStereoMic           = hex: 1
MultichannelEnabledByUser        = hex: 1
EnableNewVolumeControls   = hex: 1
DisableStereoVirtual      = hex: 1
DisableMono2Virtual       = hex: 1
DisableStereo2Virtual     = hex: 1

# These settings control the values loaded into the AC97 registers by the driver.
# This allows setting the configuration prior to any applets running.

#######################################################
# the following settings setup 2 channel plus Mic and
# Line-In on the system, plus 6 channel on the dock.
# Be careful with R6E.  Only 1 codec can be inputting
# at a time.  Setting the off codec to slots 6-9 will
# effectively disable it.
#######################################################

0_76588384_R64	=hex:14, 91	; Hand edited to select DacA instead of mixer
0_76588384_R66	=hex:03, 02
0_76588384_R68	=hex:62, 60
0_76588384_R6E	=hex:40, 90
0_76588384_R3E	=hex:00, 00
0_76588384_R4C	=hex:08, 00
0_76588384_R4E	=hex:f8, ff
0_76588384_R54	=hex:06, 00
 
2_76588384_R64	=hex:0A, D0	; Hand edited to select DacA instead of Mixer
2_76588384_R66	=hex:06, 06
2_76588384_R68	=hex:01, 60
2_76588384_R6E	=hex:60, 90
2_76588384_R3E	=hex:00, 00
2_76588384_R4C	=hex:0c, 00
2_76588384_R4E	=hex:fc, ff
2_76588384_R54	=hex:02, 00

BiosInterfaceAddress      = dword: 0x4E1		; address in physical memory
BiosInterfaceAddressEnd   = dword: 0x0		; address in physical memory

############################################################
#The following settings must be hand-edited in the INI file
############################################################

# This SPDIFSharedPinMuxBIts value is required when we have SPDIF OUT on the same jack as any analog inputs/outputs (LINE IN, REAR etc.).
# When user enables SPDIF OUT driver uses this mask to check if this jack is configured as analog input or output
# and if it is it will remember that SPDIF OUT is on but actually won't turn it on until this jack is reconfigured
# as digital input/output. Digital input/output means that this jack is turned off in reg 64 and is not selected as
# input source in reg 66.
# Last three bits are shared pin mux bits from register 66
# In all higher bits the  1  should be provided at position of the bit that powers shared pin in reg. 64.
# Below we have bit 15 set, which powers pin43/44 and 5 is mux value of pin 43/44 in reg66.
SPDIFSharedPinMuxBIts     = 66		; pin 23/24 is shared with SPDIF on PA1

DockCodecID               = hex: 2
PCMVolumeFixedLevel       = hex: 08, 08		; only meaningful in analog or DigitalMasterControlsAnalog mode
WaveInMux                 = hex: 00, 00, 00, 00		; normally Mic

#    Volume units are represented in fixed point hexadecimal, 
#    in the same units that the OS passes to the driver.
#                                        [ADC Gain]      [Output volume]             [Input Volume]
#                                        [Reg 0x1C]      [Regs 2,4,6,36,38]    [Regs A,C,E,10,12,14,16,18]
#  +22.5 dB   16.8000h = 0x00168000   max slider                                              
#  +12 dB =   0C.0000h = 0x000C0000   1/4 slider                                  max slider
#  +06 dB =   06.0000h = 0x00060000                                               1/2 slider
#    0 dB =   00.0000h = 0x00000000   min slider         max slider               1/4 slider
# -0.5 dB = FFFF.8000h = 0xFFFF8000
#   -1 dB = FFFF.0000h = 0xFFFF0000
#   -6 dB = FFFA.0000h = 0xFFFF0000                      1/2 slider               1/8 slider
#  -12 dB = FFFA.0000h = 0xFFFF0000                      1/4 slider               1/16 slider
#  -18 dB = FFFA.0000h = 0xFFFF0000                      1/8 slider
#-35.5 dB = FFDD.8000h = 0xFFDD8000                                               min slider
#  -46 dB = FFD2.0000h = 0xFFD20000                      min slider

MICAtRecMuxVolume         = hex: 63, D0, 13, 00		; (0-168000)
MICVolume                 = hex: 90, 56, 08, 00		; (ffdd8000-c0000), (5 bit control).
CDVolume                  = hex: 89, F5, FF, FF		; (ffdd8000-c0000), (5 bit controls).

MasterVolume              = hex: FF, FF, FA, FF

# Other settings
# RJL 09/08/03 Change GpioMuxType from 5 to 0.  Is should always be 0.

#####################################################################
# Presets
# For PA1 2 EQ presets are defined: InternalSpeakers (Default) and Bypass (Headphones, external speakers, etc)
#
# presets currently must be hand-entered into the ini file.
# 
[HKR\Settings\EQ]
NumBands                  = dword: 20

[HKLM\Software\Sigmatel\Presets\Application]
NumPresets                = dword: 2

# Preset1 = No external front or headphones
Preset1                   = "Default"
Preset1Mask               = dword: 0xC00
Preset1Value              = dword: 0x0

# Preset2 = External Speakers
Preset2                   = "Bypass"
Preset2Mask               = dword: 0x400
Preset2Value              = dword: 0x400

[HKLM\Software\Sigmatel\Presets\Application\Default]
EQ                        = "Default"

[HKLM\Software\Sigmatel\Presets\Application\Bypass]
EQ                        = "Bypass"


[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band0]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band1]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band2]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band3]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band4]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band5]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band6]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band7]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band8]
Flags=dword:0xffffff80

[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band9]
Flags=dword:0xffffff80


# Fixed EQ - the following bands adjust for the internal speakers.
# Stereo
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band0]
Frequency                 = dword: 180
BandWidthx1000            = dword: 1000
Gainx1000                 = dword: -16000
Flags                     = dword: 0x10301

# Left
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band1]
Frequency                 = dword: 290
BandWidthx1000            = dword: 880
Gainx1000                 = dword: 4300
Flags                     = dword: 0x20100

#Right
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band2]
Frequency                 = dword: 330
BandWidthx1000            = dword: 1000
Gainx1000                 = dword: 3200
Flags                     = dword: 0x40200

#Stereo
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band3]
Frequency                 = dword: 560
BandWidthx1000            = dword: 1250
Gainx1000                 = dword: -9400
Flags                     = dword: 0x80300

# Left
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band4]
Frequency                 = dword: 1160
BandWidthx1000            = dword: 300
Gainx1000                 = dword: 2900
Flags                     = dword: 0x100100

# Right
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band5]
Frequency                 = dword: 1270
BandWidthx1000            = dword: 400
Gainx1000                 = dword: 3400
Flags                     = dword: 0x200200

# Left
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band6]
Frequency                 = dword: 2200
BandWidthx1000            = dword: 350
Gainx1000                 = dword: 2600
Flags                     = dword: 0x400100

# Right
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band7]
Frequency                 = dword: 2700
BandWidthx1000            = dword: 500
Gainx1000                 = dword: 3900
Flags                     = dword: 0x800200

# Stereo
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band8]
Frequency                 = dword: 5398
BandWidthx1000            = dword: 500
Gainx1000                 = dword: -6900
Flags                     = dword: 0x1000300

# Stereo
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Default\Band9]
Frequency                 = dword: 11300
BandWidthx1000            = dword: 50
Gainx1000                 = dword: -22000
Flags                     = dword: 0x2000300
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 2.52