mrpc_all_eq_off.ini Driver File Contents (9524859.exe)

# Generated by UJ Circuit Analyzer
# Thursday, September 04, 2003 - 4:31:51 PM
# StacSrv version 4159
# Driver version 4159
#
# This .INI is used to turn all EQ off, but leaves BassMgmt on when no headphones plugged in.

[Models]
;all MODEL files (except perhaps STAC97.ini) should have a self-reference here.
;self-reference:
PCI\VEN_8086&DEV_24D5&subsys_3009107B= this


[DelRegKeys]
# Specify the registry keys to be deleted during Uninstall
HKCU\Software\Sigmatel\Settings=Yes    ; Delete the current user's settings subkey
HKCU\Software\Sigmatel\JackSense=Yes   ; Delete the current user's jacksense subkey
HKCU\Software\Sigmatel\JackSense2=Yes  ; Delete new user key
HKLM\Software\Sigmatel\JackSense2=Yes  ; both of them
HKR\Settings=Yes                       ; Delete the driver's settings subkey
HKR\JackSense=Yes                      ; Delete the driver's jacksense subkey
HKLM\Software\Sigmatel\Presets=Yes

# The following 2 keys cause the volume settings to be 'forgotten' during Uninstall
HKCU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes
HKU\Software\Microsoft\Windows\CurrentVersion\Applets\Volume Control\SigmaTel Audio=Yes

[Apps]
# Specify the application software to install
TinyUJ2 = No
SSWiz = Yes
StacSysTray = Yes
StacIt = No
PassThru = YesInvisible

# The following keys are used by StacSrv.application
[HKLM\Software\SigmaTel\Jacksense2]
RegistryVersionNum   = dword: 0x1     ; Newer registry format based on jacks, not pins
DefaultSpeakerConfig = dword: 0x0004  ; Default MS Spkr Config set by StacApp
PollingPeriod        = dword: 333     ; 333 millliseconds
JSOscFreq            = dword: 16000   ; Set jacksense oscillator frequency to 16kHz
DockSupport          = dword: 0       ; Bios Interface dock support
JacksNotConfigurable = dword: 1       ; 1 = no configurable jacks

# Policies
#PolicyHPMuteSpkrs      = dword: 0x0000    ; Plugging in any headphones mutes all speakers (this is under the jack key now)
PolicyDefaultBassMgmt  = dword: 1         ; 1 = Enable the 5 presets at the bottom of this file
#PolicySpkrMuteSpkrs    = dword: 0x20
#PolicyConfigurator      = dword: 1         ; Enable full Configurator presets

# Specify whether to route Line-Out/Front directly from Dac A or from the Analog Mixer
# The JackSense registry key “DigitalModel” should always be specified and set to Dword:1 
# in harmony w/ the driver setting EmulateAllMasters (binary) 01

DisableAnalogMixer   = dword: 0     ; 1 = Dac A, 0 = mixer	RJL 9/22/03 was 1

# The following keys specify the number of different setups displayed
# by the Jack Sharing applet, and the mode that they support.  This will
# subsequently effect the menu item displayed by the Jack Sharing applet.
# Typically 4 modes used are 2 (Headphones), 4 (Stereo Speakers), 5 (Quad), and 7 (5.1)

#    0 = None
#    1 = Mono Speaker
#    2 = Headphones
#    3 = Stereo Speakers (narrow)
#    4 = Stereo Speakers (wide)
#    5 = Quadraphonic (4 channel)
#    6 = Surround (4 channel)
#    7 = 5.1 Surround (6 channel)
#    All other values are invalid

NumSpkrSetups     = dword: 0x0000   ; The number of setups defined.

# The following sections define which pins are connected to jacks
# Each pin will have properties associated with it such as the color of the jack,
# where it is located, and which mode (front, rear, center/lfe) to select when a
# speaker is plugged in and autoconfigure is set.

# DefaultSpeakerMode specifies which channels to configure if JackSense is
#  active and AutoConfigure is set and speakers are plugged into the jack

[HKLM\Software\SigmaTel\JackSense2\Codec1]
DacCSwap          = dword: 0              ;Swap L/R on DAC C

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack1]	 ;  0 : 0 - Front Panel Pink Jack
#   
JackColor                = dword: 10		 ; Pink
JackLocation             = dword: 1		 ; Front Panel
JackPanelOrder           = dword: 1		 ; # 0
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 5		 ; Pins21/22
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: 1		 ; jsMic
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 2		 ; Hardwired
MicBiasPolarity          = dword: 0		 ; False
EnforceMicBiasRules      = dword: 0              ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0002	 ;   - jsMic
Notify                   = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 0		 ;    0.33 uF
DirectConnect            = dword: -1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: -1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack2]	 ;  0 : 1 - Front Panel Green Jack
#   
JackColor                = dword: 5		 ; Green
JackLocation             = dword: 1		 ; Front Panel
JackPanelOrder           = dword: 2		 ; # 1
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 0		 ; Pins35/36
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: 3		 ; jsHeadphone
GpioSwitch               = dword: 0		 ; JackSwitch GPIO = GPIO 0
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False
EnforceMicBiasRules      = dword: 0              ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x006D	 ;   - jsNone - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: 0		 ;    Jack closest to Codec
OutputCapSize            = dword: 3		 ;    100 uF 25V Alum
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 0		 ;    False
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

#policy
PolicyHPMuteSpkrs = dword: 0x3f

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack3]	 ;  0 : 2 - Rear Panel Green Jack
#   
JackColor                = dword: 5		 ; Green
JackLocation             = dword: 0		 ; Rear Panel
JackPanelOrder           = dword: 3		 ; # 2
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 0		 ; Pins35/36
DefaultSpeakerMode       = dword: 5		 ; jsSurround
PinConfiguration         = dword: 3		 ; jsHeadphone
GpioSwitch               = dword: 1		 ; JackSwitch GPIO = GPIO 1
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False
EnforceMicBiasRules      = dword: 0              ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x006D	 ;   - jsNone - jsPwrSpkr - jsHeadphone - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: 1		 ;    Jack further from codec
OutputCapSize            = dword: 3		 ;    100 uF 25V Alum
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 0		 ;    False
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack4]	 ;  0 : 3 - Rear Panel Black Jack
#   
JackColor                = dword: 0		 ; Black
JackLocation             = dword: 0		 ; Rear Panel
JackPanelOrder           = dword: 4		 ; # 3
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 1		 ; Pins39/41
DefaultSpeakerMode       = dword: 5		 ; jsSurround
PinConfiguration         = dword: 5		 ; jsSurround
GpioSwitch               = dword: 6		 ; JackSwitch GPIO = GPIO X
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False
EnforceMicBiasRules      = dword: 0              ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0065	 ;   - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 2		 ;    3.3 Ceramic
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 0		 ;    False
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack5]	 ;  0 : 4 - Rear Panel Orange Jack
#   
JackColor                = dword: 3		 ; Orange
JackLocation             = dword: 0		 ; Rear Panel
JackPanelOrder           = dword: 5		 ; # 4
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 2		 ; Pins43/44
DefaultSpeakerMode       = dword: 6		 ; jsCenterLFE
PinConfiguration         = dword: 6		 ; jsCenterLFE
GpioSwitch               = dword: 2		 ; JackSwitch GPIO = GPIO 2
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0		 ; Inverted

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False
EnforceMicBiasRules      = dword: 0              ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0065	 ;   - jsNone - jsPwrSpkr - jsSurround - jsCenterLFE
Notify                   = dword: 0x0001	 ;   - jsNone
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: -1		 ;    No Daisy Chain
OutputCapSize            = dword: 3		 ;    100 uF 25V Alum
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: 0		 ;    False
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

################################################################################
[HKLM\Software\Sigmatel\JackSense2\Jack6]	 ;  0 : 5 - Internal Amp
#   
JackColor                = dword: 6		 ; Blue
JackLocation             = dword: 2		 ; Internal Amp
JackPanelOrder           = dword: 6		 ; # 5
ParentCodecIndex         = dword: 0		 ; Codec 0
PinIndex                 = dword: 0		 ; Pins35/36
DefaultSpeakerMode       = dword: 2		 ; jsPwrSpkr
PinConfiguration         = dword: 3		 ; jsHeadphone
GpioSwitch               = dword: -1		 ; JackSwitch GPIO = gpioUnassociated
GpioMux                  = dword: -1		 ; No GPIO Crosspoint Mux
GPIOInverted             = dword: 0x1		 ; gpioUnassociated

MicBias                  = dword: -1		 ; Mic Bias GPIO = gpioUnassociated
MicBiasMode              = dword: 0		 ; Normal
MicBiasPolarity          = dword: 0		 ; False
EnforceMicBiasRules      = dword: 0              ; False

# SupportedDevices, AutoConfigure, and Notify specify bitmaps of which devices to allow:
SupportedDevices         = dword: 0x0004	 ;   - jsPwrSpkr
Notify                   = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigure            = dword: 0x0000	 ;   - jsbmAllOff
AutoConfigSupport        = dword: 0x0000	 ;   - jsbmAllOff

Jack sense algorithm controls
JSAlgorithm              = dword: 1		 ;    jsaGood
JSReadingsTotal          = dword: 30		 ;    30
JSReadingsGood           = dword: 5		 ;    5

# Items directly derived from schematic review
DaisyChain               = dword: 2		 ;    Jack furthest from codec
OutputCapSize            = dword: 1		 ;    1.0 uF
DirectConnect            = dword: 1		 ;    True
FiveOhmResistorPresent   = dword: 0		 ;    False
HasIntelFrontPanelHeader = dword: 0		 ;    False
ImpedanceGtrThan16k      = dword: -1		 ;    True
IsDeviceSupported        = dword: 0		 ;    False
IsolatedSwitch           = dword: 0		 ;    False

[HKR\Settings]

EmulateAllMasters = hex: 1
DigitalMasterControlsAnalog = hex: 1   ; RJL 10/2/03
EnableLinearVolumes = hex: 1
MakeCodecsPlayInParallel = hex: 0
DisableCDIn = hex: 1
MuteInactiveDac = hex: 0
DisableHeadphone = hex: 1
DisableLnlvl = hex: 1
DisableWaveIn2 = hex: 1
DisablePCBeep = hex: 1
DisablePhone = hex: 0                   ; RJL 10/2/03
DisableMonoOut = hex: 1
DisableAux = hex: 1
DisableVideo = hex: 1
Disable3DControl = hex: 1
DisableMonoVirtual = hex: 1
DisableMICSelect = hex: 1
DisableLineInFromPlayback = hex: 1	; RJL 10/2/03
DisableMicFromPlayback = hex: 1
DisablePeakmeters = hex: 1
EnableSPDIFIn = hex: 0                  ; RJL 10/2/03
CPL_SpdifTransmitterEnabledByUser = hex: 1     ; enabled
DisableSPDIFControl	= hex: 0
MICBoost = hex: 1
MasterControlsAux = hex: 0
MasterControlsMono = hex: 0
RecMuxMuteAtFloor = hex: 0
MICSelect = hex: 0
3DDepthEnable = hex: 0
PCBeepMute = hex: 1                     ; RJL 10/2/03
PhoneMute = hex: 1
CDMute = hex: 1
VideoMute = hex: 1
AuxMute = hex: 1
EnableExtAmpControl = hex: 0
EnableNonPCMOnWin2K = hex: 1
EnableStereoMic = hex: 1
MultichannelEnabledByUser = hex: 1
EnableNewVolumeControls = hex: 1
BiosInterfaceAddress = hex: 0
#DockCodecID = hex: 1                   ; RJL 10/2/03 removing.
WaveInMux = hex: 0
DisableStereoVirtual = hex: 1		; RJL 10/2/03
DisableMono2Virtual = hex: 0
DisableStereo2Virtual = hex: 0
EnableVrefPowerDown   = hex: 1		; SWH 10/9/03


# These settings control the values loaded into the AC97 registers by the driver.
# This allows setting the configuration prior to any applets running.

#######################################################
# the following settings setup 2 channel plus Mic and
# Line-In on the system, plus 6 channel on the dock.
# Be careful with R6E.  Only 1 codec can be inputting
# at a time.  Setting the off codec to slots 6-9 will
# effectively disable it.
#######################################################

0_76588384_R3E      = hex: 01, 00    ; R3E = 0x0001
0_76588384_R4C      = hex: 0F, 00    ; R4C = 0x000F
0_76588384_R4E      = hex: FF, FF    ; R4E = 0xFFFF
0_76588384_R54      = hex: 08, 00    ; R54 = 0x0008
0_76588384_R64      = hex: 00, D2    ; R64 = 0xD200
0_76588384_R66      = hex: 01, 02    ; R66 = 0x0201
0_76588384_R68      = hex: 71, 01    ; R68 = 0x0171
0_76588384_R6E      = hex: 40, 90    ; R6E = 0x9040
0_76588384_R74      = hex: 00, 08    ; R74 = 0x0800


BiosInterfaceAddress      = dword: 0x00000000	 ; address in physical memory
BiosInterfaceAddressEnd   = dword: 0x00000000	 ; address in physical memory

############################################################
#The following settings must be hand-edited in the INI file
############################################################


PCMVolumeFixedLevel       = hex: 08, 08          ; only meaningful in analog or DigitalMasterControlsAnalog mode
WaveInMux                 = hex: 00, 00, 00, 00  ; normally Mic

#    Volume units are represented in fixed point hexadecimal, 
#    in the same units that the OS passes to the driver.
#                                        [ADC Gain]      [Output volume]             [Input Volume]
#                                        [Reg 0x1C]      [Regs 2,4,6,36,38]    [Regs A,C,E,10,12,14,16,18]
#  +22.5 dB   16.8000h = 0x00168000   max slider                                              
#  +12 dB =   0C.0000h = 0x000C0000   1/4 slider                                  max slider
#  +06 dB =   06.0000h = 0x00060000                                               1/2 slider
#    0 dB =   00.0000h = 0x00000000   min slider         max slider               1/4 slider
# -0.5 dB = FFFF.8000h = 0xFFFF8000
#   -1 dB = FFFF.0000h = 0xFFFF0000
#   -6 dB = FFFA.0000h = 0xFFFF0000                      1/2 slider               1/8 slider
#  -12 dB = FFFA.0000h = 0xFFFF0000                      1/4 slider               1/16 slider
#  -18 dB = FFFA.0000h = 0xFFFF0000                      1/8 slider
#-35.5 dB = FFDD.8000h = 0xFFDD8000                                               min slider
#  -46 dB = FFD2.0000h = 0xFFD20000                      min slider

MICAtRecMuxVolume  = hex: 63, D0, 13, 00  ; (0-168000)
MICVolume          = hex: 90, 56, 08, 00  ; (ffdd8000-c0000), (5 bit control).
CDVolume           = hex: 89, F5, FF, FF  ; (ffdd8000-c0000), (5 bit controls).

# Other settings

[HKLM\Software\SigmaTel\Jacksense2]
PolicyMRPC              = dword: 1   ; support for MRPC's cascaded jacks.

#
# Presets
#
# presets currently must be hand-entered into the ini file.
# 
[HKLM\Software\Sigmatel\Presets\Application\Default]
BassMgr="Default"
EQ="Bypass"

[HKLM\Software\Sigmatel\Presets\Application\Bypass]
BassMgr="Bypass"
EQ="Bypass"

[HKLM\Software\Sigmatel\Presets\Application\ExtSub]
BassMgr="Default"
EQ="Bypass"

[HKLM\Software\Sigmatel\Presets\Application\ExtSpkr]
BassMgr="Default"
EQ="Bypass"

[HKLM\Software\Sigmatel\Presets\Application\ExtAll]
BassMgr="Default"
EQ="Bypass"


[HKLM\SOFTWARE\SigmaTel\Presets\BassMgr\Bypass]
bBypass=dword:1
ChanEqFreqx1000=dword:204000
ChanEqGainx1000=dword:0xffff92a0
SubmixEqFreqx1000=dword:0x00031ce0
SubmixEqGainx1000=dword:0xffff92a0
SubmixLevelx1000=dword:0xffff8ad0
SubmixReturnLevelx1000=dword:0xffff8ad0

[HKLM\SOFTWARE\SigmaTel\Presets\BassMgr\Default]
bBypass=dword:0
ChanEqFreqx1000=dword:204000
ChanEqGainx1000=dword:0
SubmixEqFreqx1000=dword:0x00031ce0
SubmixEqGainx1000=dword:0
SubmixLevelx1000=dword:0
SubmixReturnLevelx1000=dword:0xffff8ad0


############
# EQ BYPASS
############
[HKLM\SOFTWARE\SigmaTel\Presets\EQ\Bypass\Band0]
Flags=dword:0xffffff80




Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web3, load: 1.96