Build.exe Setup Utility !Warning! Running the steps for this utility will erase the contents of this system. Make sure to back up any necessary files prior to running this utility. 1. After double-clicking on the Scanfix.exe file a build.exe file will appear. Make sure this file is saved to the hard disk. (ex. C:\Windows\Desktop) 2. Insert a blank formatted floppy into the A: drive. 3. Double-click on the Build.exe file. Note: You can not execute the build.exe file from the floppy disk. 4. Click on the Setup button. 5. Press the Enter key. (The utility will format the diskette and copy the necessary files, so this step may take a minute or two.) 6. Press the Space bar. 7. Close the Dos window. 8. Leave the floppy disk in the floppy drive and reboot the system. Note: Do NOT put the Recovery CD in at this time. Just the floppy disk. 9. The system will boot to the Floppy disk and ask for the system Recovery CD. Insert it at this time and continue with the on-screen installations instructions. Applicable Part Numbers: 3500585, 3500587, 2800014, 2800015, 2800023, 2800026, 3500697, 3500698, 3500855Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.