Installing an EtherWORKS 3 adapter on WIN95 =========================================== Double-click MY COMPUTER Icon Double-click CONTROL PANEL Icon Double-click NETWORK Icon Under the CONFIGURATION tab click the ADD... button Select the ADAPTER Icon in the SELECT NETWORK COMPONENT TYPE box click the ADD... button In the SELECT NETWORKS ADAPTERS BOX Manufacturers: scroll down to Digital Equipment select Digital Equipment Networks Adapters: scroll down to DEC EtherWORKS 3 (All ISA versions) select DEC EtherWORKS 3 (All ISA versions) click the OK button *************************** We are now back in the NETWORK box under the CONFIGURATION tab. Select DEC EtherWORKS 3 (All ISA versions) Click the PROPERTIES button In the DEC EtherWORKS 3 (ALL ISA VERSIONS) box DRIVER TYPE tab: Enhanced mode (32 bit and 16 bit NDIS driver) {prefered} BINDINGS tab: select protocol type used on the network ADVANCED tab: 2K/Configuration Type 0 is prefered, but the others may be used as the need arises. RESOURCES tab: Ensure the I/O address, IRQ and Memory address selection are the same the NIC being installed. If not sure, run the NICSETUP utility found on the driver diskette under the WIN95 DOS prompt to confirm/change the settings to match. NOTE: The asterisk before the hardware settings indicates a conflict exists with other hardware. Make the changes needed to eliminate the conflict. Click the CLOSE button *************************** We are now back in the NETWORK box under the CONFIGURATION tab. RESOURCES tab: you may wish to review the network components and remove those not used by your network i.e. CLIENT FOR MICROSOFT NETWORKS CLIENT FOR NETWARE NETWORKS IPX/SPX-COMPATIBLE PROTOCOL NETBEUI CAUTION: ensure the network component is not needed by your network before removal, otherwise improper network functionality may occur. IDENTIFICATION tab: ensure the computer name is unique on the network. The WORKGROUP name must be assigned if sharing files or printers. ACCESS CONTROL tab: Make selections on security level for sharing files. ############# We are now ready to bring up the network. Click the OK buttonDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.