1. e2kit201.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (e2kit201.zip)

*****************************************************************************

     INSTALLING THE NETWARE DOS IPX CLIENT DRIVER (Version 2.2 Only)

*****************************************************************************

  Step 1. Format a blank floppy giving it a volume label of LAN_DRV_422.
	  Copy the following files from the enclosed diskette to this 
	  newly created floppy:
	   
		a:\netware\dosipx\DOSIPX.LAN
		a:\netware\dosipx\DOSIPX.OBJ
		
  Step 2 To create a new workstation IPX use Novell's WSGEN utility 
	 following the directions in Novell's manual "INSTALLING and 
	 MAINTAINING THE NETWORK" page 51. For step 4b of the instructions 
	 use the LAN_DRV_422 floppy created in step 1, and select  
	 DEC DE100/DE200/DE210/DE422 v1.03EC (921105).

	 *NOTE* This will create an IPX.COM using the default settings
	 for the DEC EtherWORKS Adapter as shown below. To modify the
	 IPX.COM for settings other than default use the Novell utilities
	 JUMPERS/ECONFIG. Consult the Novell manuals for instructions.
	 
	   Example of Default Settings:
	   
	   MEMORY ADDRESS = D000
	   I/O ADDRESS    = 0300
	   IRQ            = 5
	   FRAME          = 802.3
	   
	   Note that the IRQ, MEMORY ADDRESS, and I/O ADDRESS of the
	   DEC EtherWORKS Adapter must not conflict with other PC
	   adapters installed in the PC.
   
   I.E.3 Once IPX.COM has been created add it to the Startup file or
	 Autoexec.bat of the PC along with the appropiate NETx.COM file.
	 
	 Example Autoexec.bat/Startup file:
	 
				   C:\IPX
				   C:\NETx


         NOTE: The NETWARE IPX Drivers currently support 64KB and 32KB 
               modes only.