; Tulip Enabled. ; ; COMMERCIAL INSTALL ; ; hpgt82.INF -- Windows Still Image Setup File for 8200 Scanners ; Note - this file is for Win98/Win98SE/Windows 2000/Windows XP ; Copyright (c) 1999 Hewlett-Packard Company ; Leave these lines as they are. ; ; The following GUID uniquely identifies this .INF ; GUID: {4E6C081A-4D67-43C6-922C-C7B8C56134DF} [Version] Signature="$CHICAGO$" Class=Image ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f} Provider=%HP% CatalogFile=hpgct82.cat DriverVer=01/01/2003,2.0.1.1 ; Class installer that prevents a Win95 USB Hardware First Installation. [ClassInstall] AddReg=HPImageClass.AddReg CopyFiles=HPImageClass.CopyFiles [HPImageClass.CopyFiles] hpsj95ci.dll [HPImageClass.AddReg] HKR,,,,%HPImageClass.Desc% HKR,,Installer,,hpsj95ci.dll HKR,,NoUseClass,,1 HKR,,NoInstallClass,,1 HKR,,NoDisplayClass,,1 HKR,,SilentInstall,,1 HKR,,Icon,,-20 [DestinationDirs] ; By default, files will be copied to \windows\system. DefaultDestDir=11 HP8200.Usb.WDMdriver=10,system32\drivers ; \windows\system32\drivers HP8200.CopyDS=10,TWAIN_32 [ControlFlags] ; Remove comment from this line if all devices are PnP. ExcludeFromSelect=* [Manufacturer] %Mfg%=Models, NT.5.1 [Models] ;STI Models %HPSJ8200Series% = HP8200.Usb, USB\VID_03F0&Pid_0b01 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________0 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________1 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________2 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________3 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________4 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________5 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________6 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________7 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________8 %HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________9 %HPSJ8200Series% = HP8200.SCSI, SCSI\Scannerhp______C9930A__________ ;WIA Models %HPSJ8200Series% = HP8200.Usb.WIA, USB\VID_03F0&PID_0b01 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________0 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________1 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________2 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________3 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________4 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________5 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________6 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________7 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________8 %HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________9 %HPSJ8200Series% = HP8200.SCSI.WIA, SCSI\Scannerhp______C9930A__________ ; Windows XP(Whistler) or later. [Models.NT.5.1] ;WIA Models %HPSJ8200Series% = HP8200.Usb.NTWIA, USB\VID_03F0&PID_0b01 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________0 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________1 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________2 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________3 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________4 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________5 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________6 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________7 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________8 %HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________9 %HPSJ8200Series% = HP8200.SCSI.NTWIA, SCSI\Scannerhp______C9930A__________ ; ***************************************************************************************** ; Win98, 98SE only (STI) ; VERY IMPORTANT - do not change the DriverVer date in this section. Leave at 1/10/2000 ; ***************************************************************************************** [HP8200.Usb] ;Non-Millenium OSes only. Make sure DriverVer is NOT newer than the WIA section!!! DriverVer=01/10/2000,1.00.0001.1 SubClass=StillImage DeviceType=1 DeviceSubType=0x1 Capabilities=0x0 DeviceData=HP8200.DeviceData AddReg=HP8200.Usb.AddReg,HP8200.AddReg.STI,HP8200.CurrentDevice CopyFiles=HP8200.CopyFiles,HP8200.Usb.WDMdriver,HP8200.CopyDS VendorSetup="hpgcvsco,InstallScanJetSoftware 8200" ICMProfiles="sRGB Color Space Profile.icm" [HP8200.SCSI] ;Non-Millenium OSes only. Make sure DriverVer is NOT newer than the WIA section!!! DriverVer=01/10/2000,1.00.0001.1 SubClass=StillImage DeviceType=1 DeviceSubType=0x1 Capabilities=0x0 DeviceData=HP8200.DeviceData AddReg=HP8200.SCSI.AddReg,HP8200.AddReg.STI,HP8200.CurrentDevice CopyFiles=HP8200.CopyFiles,HP8200.SCSI.WDMdriver,HP8200.CopyDS VendorSetup="hpgcvsco,InstallScanJetSoftware 8200" ICMProfiles="sRGB Color Space Profile.icm" ; ***************************************************************************************** ; Windows Millenium Only (WIA) ; ***************************************************************************************** [HP8200.Usb.WIA] ;Millenium (WIA) OSes only. Make sure DriverVer is newer than the Win98 section!!! DriverVer=01/01/2003,2.0.1.1 Include=sti.inf Needs=STI.USBSection SubClass=StillImage DeviceType=1 DeviceSubType=0x1 Capabilities=0x30 DeviceData=HP8200.DeviceData.WIA AddReg=HP8200.Usb.AddReg,HP8200.AddReg.WIA,HP8200.CurrentDevice CopyFiles=HP8200.CopyFiles.WIA,HP8200.CopyDS VendorSetup="hpgcvsco,InstallScanJetSoftware 8200" ICMProfiles="sRGB Color Space Profile.icm" [HP8200.SCSI.WIA] ;Millenium (WIA) OSes only. Make sure DriverVer is newer than the Win98 section!!! DriverVer=01/01/2003,2.0.1.1 Include=sti.inf Needs=STI.SCSISection SubClass=StillImage DeviceType=1 DeviceSubType=0x1 Capabilities=0x30 DeviceData=HP8200.DeviceData.WIA AddReg=HP8200.SCSI.AddReg,HP8200.AddReg.WIA,HP8200.CurrentDevice CopyFiles=HP8200.CopyFiles.WIA,HP8200.CopyDS VendorSetup="hpgcvsco,InstallScanJetSoftware 8200" ICMProfiles="sRGB Color Space Profile.icm" ; ***************************************************************************************** ; Windows 2000 Only (STI) ; ***************************************************************************************** [HP8200.Usb.NT] DriverVer=01/01/2003,2.0.1.1 ; The next two lines are new from Win2k to do the install of the kernel mode driver. Include=sti.inf Needs=STI.USBSection SubClass=StillImage DeviceType=1 DeviceSubType=0x1 Capabilities=0x0 DeviceData=HP8200.DeviceData AddReg=HP8200.Usb.AddReg,HP8200.AddReg.STI CopyFiles=HP8200.CopyFiles,HP8200.CopyDS RegisterDlls=HP8200.RegisterDlls.STI ; Coinstaller needs to explicitly do this. ICMProfiles="sRGB Color Space Profile.icm" [HP8200.Usb.NT.Services] Include=sti.inf Needs=STI.USBSection.Services [HP8200.Usb.NT.coinstallers] AddReg=Coinstaller.AddReg CopyFiles=Coinstaller.CopyFiles [HP8200.Usb.NT.HW] AddReg=HP8200.HWmodelU [HP8200.SCSI.NT] DriverVer=01/01/2003,2.0.1.1 ; The next two lines are new from Win2k to do the install of the kernel mode driver. Include=sti.inf Needs=STI.SCSISection SubClass=StillImage DeviceType=1 DeviceSubType=0x1 Capabilities=0 DeviceData=HP8200.DeviceData AddReg=HP8200.SCSI.AddReg,HP8200.AddReg.STI CopyFiles=HP8200.CopyFiles,HP8200.CopyDS RegisterDlls=HP8200.RegisterDlls.STI ; Coinstaller needs to explicitly do this. ICMProfiles="sRGB Color Space Profile.icm" [HP8200.SCSI.NT.Services] Include=sti.inf Needs=STI.SCSISection.Services [HP8200.SCSI.NT.coinstallers] AddReg=Coinstaller.AddReg CopyFiles=Coinstaller.CopyFiles [HP8200.SCSI.NT.HW] AddReg=HP8200.HWmodelU ; ***************************************************************************************** ; Windows XP (Whistler) and later (WIA) ; ***************************************************************************************** [HP8200.Usb.NTWIA] ;Millenium (WIA) OSes only. Make sure DriverVer is newer than the Win98 section!!! DriverVer=01/01/2003,2.0.1.1 Include=sti.inf Needs=STI.USBSection SubClass=StillImage DeviceType=1 DeviceSubType=0x1 Capabilities=0x30 DeviceData=HP8200.DeviceData.WIA AddReg=HP8200.Usb.AddReg,HP8200.AddReg.WIA CopyFiles=HP8200.CopyFiles.WIA,HP8200.CopyDS RegisterDlls=HP8200.RegisterDlls.WIA ICMProfiles="sRGB Color Space Profile.icm" [HP8200.Usb.NTWIA.Services] Include=sti.inf Needs=STI.USBSection.Services [HP8200.Usb.NTWIA.coinstallers] AddReg=Coinstaller.AddReg CopyFiles=Coinstaller.CopyFiles [HP8200.Usb.NTWIA.HW] AddReg=HP8200.HWmodelU [HP8200.SCSI.NTWIA] ;Millenium (WIA) OSes only. Make sure DriverVer is newer than the Win98 section!!! DriverVer=01/01/2003,2.0.1.1 Include=sti.inf Needs=STI.SCSISection SubClass=StillImage DeviceType=1 DeviceSubType=0x1 Capabilities=0x30 DeviceData=HP8200.DeviceData.WIA AddReg=HP8200.SCSI.AddReg,HP8200.AddReg.WIA CopyFiles=HP8200.CopyFiles.WIA,HP8200.CopyDS RegisterDlls=HP8200.RegisterDlls.WIA ICMProfiles="sRGB Color Space Profile.icm" [HP8200.SCSI.NTWIA.Services] Include=sti.inf Needs=STI.SCSISection.Services [HP8200.SCSI.NTWIA.coinstallers] AddReg=Coinstaller.AddReg CopyFiles=Coinstaller.CopyFiles [HP8200.SCSI.NTWIA.HW] AddReg=HP8200.HWmodelU ; ***************************************************************************************** ; Common sections ; ***************************************************************************************** ; This is for the coninstaller functionality that replaces VendorSetup [HP8200.HWmodelU] HKR,,CoinstallerModel,,"8200CU_CUE" [Coinstaller.AddReg] HKR,,CoInstallers32,0x00010000,"hpgcvsco.dll,HPScannerCoInstaller" [HP8200.DeviceData] TwainDS="" TulipCLSID={D502149A-33F4-49F1-9371-56382CD043A1} TulipDriver=hpgt82.dll InstallCLSID={4D4E7AD1-7049-409F-B159-F5BFB0DC4EC3} InstallRegPath="Software\HP\Scanners" [HP8200.DeviceData.WIA] TwainDS="" Server=local UI Class ID={4DB1AD10-3391-11D2-9A33-00C04FA36145} TulipCLSID={D502149A-33F4-49F1-9371-56382CD043A1} TulipDriver=hpgt82.dll InstallCLSID={4D4E7AD1-7049-409F-B159-F5BFB0DC4EC3} InstallRegPath="Software\HP\Scanners" [HP8200.AddReg.WIA] HKR,,USDClass,,"{552A819C-9CAC-4379-9638-BD335A10A11B}" HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B},,,"hp WIA/STI USD commercial" HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B}\InProcServer32,,,%11%\HPGCWIAM.dll HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B}\InProcServer32,ThreadingModel,,"Both" [HP8200.AddReg.STI] ; Register the commercial Tulip Common USD HKR,,USDClass,,"{5603B647-4E79-44BD-92C5-4EC272894125}" HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125},,,"hp STI USD commercial" HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125}\InProcServer32,,,%11%\HPGCTUSD.dll HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125}\InProcServer32,ThreadingModel,,"Both" ; ; TulipIOType - from Tulip doc for ENUM SCANNER_IO_TYPE ; 1 = USB, 2 = Parallel, 3 = SCSI, 4 = DOT4, 5 = IP (network), 6 = USB2, 7 = 1394 (firewire). ; [HP8200.Usb.AddReg] ; This all depends on which kernel services you need ; Hardware configuration is not known HKR,,HardwareConfig,1,1 HKR,,DevLoader,,*NTKERN HKR,,NTMPDriver,,"usbscan.sys" HKR,DeviceData,TulipIOType,0x10001,1 [HP8200.SCSI.AddReg] ; This all depends on which kernel services you need ; Hardware configuration is not known HKR,,HardwareConfig,1,1 HKR,,DevLoader,,*NTKERN HKR,,NTMPDriver,,"scsimap.sys,scsiscan.sys" HKR,DeviceData,TulipIOType,0x10001,3 [HP8200.CurrentDevice] ; This marks this SW instance as a the most current install device. ; VendorSetup needs this to determine the HW devnode for the current device. HKR,,LastInstalled,,"True" [HP8200.RegisterDlls.WIA] 11,,hpgt82.dll,1 11,,hpgcwiam.dll,1 [HP8200.RegisterDlls.STI] 11,,hpgt82.dll,1 11,,hpgctusd.dll,1 [HP8200.CopyFiles] hpgctusd.dll hpgcvsco.dll hpgt82.dll [HP8200.CopyFiles.WIA] hpgcwiam.dll hpgt82.dll hpgcvsco.dll [HP8200.CopyDS] [HP8200.Usb.WDMdriver] ; Copy the kernel drivers that are needed. usbscan.sys,usbscan.sy_ [HP8200.SCSI.WDMdriver] ; Copy the kernel drivers that are needed. scsiscan.sys,scsiscan.sy_ scsimap.sys,scsimap.sy_ [Coinstaller.CopyFiles] hpgcvsco.dll [SourceDisksNames] 99=%DiskName%,, [SourceDisksFiles] hpgctusd.dll=99 hpgcvsco.dll=99 hpsj95ci.dll=99 usbscan.sy_=99 hpgcwiam.dll=99 hpgt82.dll=99 [Strings] ; Always put strings down here so they can be easily localized to ; other languages. HP="Hewlett-Packard" Mfg="Hewlett-Packard" DiskName="HP Scanning Software" HPImageClass.desc="HP Win95 Lockout Class" HPSJ8200Series="hp scanjet 8200 series"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.