1. col4076.exe Driver
  2. hpgct82.inf File Contents

hpgct82.inf Driver File Contents (col4076.exe)

; Tulip Enabled.
;
; COMMERCIAL INSTALL
;
; hpgt82.INF  -- Windows Still Image Setup File for 8200 Scanners
; Note - this file is for Win98/Win98SE/Windows 2000/Windows XP
; Copyright (c) 1999 Hewlett-Packard Company
; Leave these lines as they are.
;
; The following GUID uniquely identifies this .INF
; GUID:  {4E6C081A-4D67-43C6-922C-C7B8C56134DF}

[Version]
Signature="$CHICAGO$"
Class=Image
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
Provider=%HP%
CatalogFile=hpgct82.cat
DriverVer=01/01/2003,2.0.1.1

; Class installer that prevents a Win95 USB Hardware First Installation.
[ClassInstall]
AddReg=HPImageClass.AddReg
CopyFiles=HPImageClass.CopyFiles

[HPImageClass.CopyFiles]
hpsj95ci.dll

[HPImageClass.AddReg]
HKR,,,,%HPImageClass.Desc%
HKR,,Installer,,hpsj95ci.dll
HKR,,NoUseClass,,1
HKR,,NoInstallClass,,1
HKR,,NoDisplayClass,,1
HKR,,SilentInstall,,1
HKR,,Icon,,-20

[DestinationDirs]
; By default, files will be copied to \windows\system.
DefaultDestDir=11
HP8200.Usb.WDMdriver=10,system32\drivers 	; \windows\system32\drivers
HP8200.CopyDS=10,TWAIN_32

[ControlFlags]
; Remove comment from this line if all devices are PnP.
ExcludeFromSelect=*

[Manufacturer]
%Mfg%=Models, NT.5.1

[Models]
;STI Models
%HPSJ8200Series% = HP8200.Usb, USB\VID_03F0&Pid_0b01
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________0
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________1
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________2
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________3
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________4
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________5
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________6
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________7
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________8
%HPSJ8200Series% = HP8200.SCSI, HP______C9930A__________9
%HPSJ8200Series% = HP8200.SCSI, SCSI\Scannerhp______C9930A__________
;WIA Models
%HPSJ8200Series% = HP8200.Usb.WIA, USB\VID_03F0&PID_0b01
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________0
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________1
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________2
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________3
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________4
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________5
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________6
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________7
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________8
%HPSJ8200Series% = HP8200.SCSI.WIA, HP______C9930A__________9
%HPSJ8200Series% = HP8200.SCSI.WIA, SCSI\Scannerhp______C9930A__________

; Windows XP(Whistler) or later.
[Models.NT.5.1]
;WIA Models
%HPSJ8200Series% = HP8200.Usb.NTWIA, USB\VID_03F0&PID_0b01
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________0
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________1
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________2
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________3
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________4
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________5
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________6
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________7
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________8
%HPSJ8200Series% = HP8200.SCSI.NTWIA, HP______C9930A__________9
%HPSJ8200Series% = HP8200.SCSI.NTWIA, SCSI\Scannerhp______C9930A__________

; *****************************************************************************************
;            Win98, 98SE only (STI)
; VERY IMPORTANT - do not change the DriverVer date in this section.  Leave at 1/10/2000
; *****************************************************************************************
[HP8200.Usb]
;Non-Millenium OSes only.  Make sure DriverVer is NOT newer than the WIA section!!!
DriverVer=01/10/2000,1.00.0001.1
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
Capabilities=0x0
DeviceData=HP8200.DeviceData
AddReg=HP8200.Usb.AddReg,HP8200.AddReg.STI,HP8200.CurrentDevice
CopyFiles=HP8200.CopyFiles,HP8200.Usb.WDMdriver,HP8200.CopyDS
VendorSetup="hpgcvsco,InstallScanJetSoftware 8200"
ICMProfiles="sRGB Color Space Profile.icm"

[HP8200.SCSI]
;Non-Millenium OSes only.  Make sure DriverVer is NOT newer than the WIA section!!!
DriverVer=01/10/2000,1.00.0001.1
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
Capabilities=0x0
DeviceData=HP8200.DeviceData
AddReg=HP8200.SCSI.AddReg,HP8200.AddReg.STI,HP8200.CurrentDevice
CopyFiles=HP8200.CopyFiles,HP8200.SCSI.WDMdriver,HP8200.CopyDS
VendorSetup="hpgcvsco,InstallScanJetSoftware 8200"
ICMProfiles="sRGB Color Space Profile.icm"

; *****************************************************************************************
;            Windows Millenium Only (WIA)
; *****************************************************************************************
[HP8200.Usb.WIA]
;Millenium (WIA) OSes only.  Make sure DriverVer is newer than the Win98 section!!!
DriverVer=01/01/2003,2.0.1.1
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
Capabilities=0x30
DeviceData=HP8200.DeviceData.WIA
AddReg=HP8200.Usb.AddReg,HP8200.AddReg.WIA,HP8200.CurrentDevice
CopyFiles=HP8200.CopyFiles.WIA,HP8200.CopyDS
VendorSetup="hpgcvsco,InstallScanJetSoftware 8200"
ICMProfiles="sRGB Color Space Profile.icm"

[HP8200.SCSI.WIA]
;Millenium (WIA) OSes only.  Make sure DriverVer is newer than the Win98 section!!!
DriverVer=01/01/2003,2.0.1.1
Include=sti.inf
Needs=STI.SCSISection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
Capabilities=0x30
DeviceData=HP8200.DeviceData.WIA
AddReg=HP8200.SCSI.AddReg,HP8200.AddReg.WIA,HP8200.CurrentDevice
CopyFiles=HP8200.CopyFiles.WIA,HP8200.CopyDS
VendorSetup="hpgcvsco,InstallScanJetSoftware 8200"
ICMProfiles="sRGB Color Space Profile.icm"

; *****************************************************************************************
;           Windows 2000 Only (STI)
; *****************************************************************************************
[HP8200.Usb.NT]
DriverVer=01/01/2003,2.0.1.1
; The next two lines are new from Win2k to do the install of the kernel mode driver.
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
Capabilities=0x0
DeviceData=HP8200.DeviceData
AddReg=HP8200.Usb.AddReg,HP8200.AddReg.STI
CopyFiles=HP8200.CopyFiles,HP8200.CopyDS
RegisterDlls=HP8200.RegisterDlls.STI 		; Coinstaller needs to explicitly do this.
ICMProfiles="sRGB Color Space Profile.icm"

[HP8200.Usb.NT.Services]
Include=sti.inf
Needs=STI.USBSection.Services

[HP8200.Usb.NT.coinstallers]
AddReg=Coinstaller.AddReg
CopyFiles=Coinstaller.CopyFiles

[HP8200.Usb.NT.HW]
AddReg=HP8200.HWmodelU

[HP8200.SCSI.NT]
DriverVer=01/01/2003,2.0.1.1
; The next two lines are new from Win2k to do the install of the kernel mode driver.
Include=sti.inf
Needs=STI.SCSISection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
Capabilities=0
DeviceData=HP8200.DeviceData
AddReg=HP8200.SCSI.AddReg,HP8200.AddReg.STI
CopyFiles=HP8200.CopyFiles,HP8200.CopyDS
RegisterDlls=HP8200.RegisterDlls.STI		; Coinstaller needs to explicitly do this.
ICMProfiles="sRGB Color Space Profile.icm"

[HP8200.SCSI.NT.Services]
Include=sti.inf
Needs=STI.SCSISection.Services

[HP8200.SCSI.NT.coinstallers]
AddReg=Coinstaller.AddReg
CopyFiles=Coinstaller.CopyFiles

[HP8200.SCSI.NT.HW]
AddReg=HP8200.HWmodelU

; *****************************************************************************************
;           Windows XP (Whistler) and later (WIA)
; *****************************************************************************************
[HP8200.Usb.NTWIA]
;Millenium (WIA) OSes only.  Make sure DriverVer is newer than the Win98 section!!!
DriverVer=01/01/2003,2.0.1.1
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
Capabilities=0x30
DeviceData=HP8200.DeviceData.WIA
AddReg=HP8200.Usb.AddReg,HP8200.AddReg.WIA
CopyFiles=HP8200.CopyFiles.WIA,HP8200.CopyDS
RegisterDlls=HP8200.RegisterDlls.WIA
ICMProfiles="sRGB Color Space Profile.icm"

[HP8200.Usb.NTWIA.Services]
Include=sti.inf
Needs=STI.USBSection.Services

[HP8200.Usb.NTWIA.coinstallers]
AddReg=Coinstaller.AddReg
CopyFiles=Coinstaller.CopyFiles

[HP8200.Usb.NTWIA.HW]
AddReg=HP8200.HWmodelU

[HP8200.SCSI.NTWIA]
;Millenium (WIA) OSes only.  Make sure DriverVer is newer than the Win98 section!!!
DriverVer=01/01/2003,2.0.1.1
Include=sti.inf
Needs=STI.SCSISection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
Capabilities=0x30
DeviceData=HP8200.DeviceData.WIA
AddReg=HP8200.SCSI.AddReg,HP8200.AddReg.WIA
CopyFiles=HP8200.CopyFiles.WIA,HP8200.CopyDS
RegisterDlls=HP8200.RegisterDlls.WIA
ICMProfiles="sRGB Color Space Profile.icm"

[HP8200.SCSI.NTWIA.Services]
Include=sti.inf
Needs=STI.SCSISection.Services

[HP8200.SCSI.NTWIA.coinstallers]
AddReg=Coinstaller.AddReg
CopyFiles=Coinstaller.CopyFiles

[HP8200.SCSI.NTWIA.HW]
AddReg=HP8200.HWmodelU

; *****************************************************************************************
;           Common sections
; *****************************************************************************************

;  This is for the coninstaller functionality that replaces VendorSetup
[HP8200.HWmodelU]
HKR,,CoinstallerModel,,"8200CU_CUE"

[Coinstaller.AddReg]
HKR,,CoInstallers32,0x00010000,"hpgcvsco.dll,HPScannerCoInstaller"

[HP8200.DeviceData]
TwainDS=""
TulipCLSID={D502149A-33F4-49F1-9371-56382CD043A1}
TulipDriver=hpgt82.dll
InstallCLSID={4D4E7AD1-7049-409F-B159-F5BFB0DC4EC3}
InstallRegPath="Software\HP\Scanners"

[HP8200.DeviceData.WIA]
TwainDS=""
Server=local
UI Class ID={4DB1AD10-3391-11D2-9A33-00C04FA36145}
TulipCLSID={D502149A-33F4-49F1-9371-56382CD043A1}
TulipDriver=hpgt82.dll
InstallCLSID={4D4E7AD1-7049-409F-B159-F5BFB0DC4EC3}
InstallRegPath="Software\HP\Scanners"

[HP8200.AddReg.WIA]
HKR,,USDClass,,"{552A819C-9CAC-4379-9638-BD335A10A11B}"
HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B},,,"hp WIA/STI USD commercial"
HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B}\InProcServer32,,,%11%\HPGCWIAM.dll
HKCR,CLSID\{552A819C-9CAC-4379-9638-BD335A10A11B}\InProcServer32,ThreadingModel,,"Both"

[HP8200.AddReg.STI]
; Register the commercial Tulip Common USD
HKR,,USDClass,,"{5603B647-4E79-44BD-92C5-4EC272894125}"
HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125},,,"hp STI USD commercial"
HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125}\InProcServer32,,,%11%\HPGCTUSD.dll
HKCR,CLSID\{5603B647-4E79-44BD-92C5-4EC272894125}\InProcServer32,ThreadingModel,,"Both"

;
; TulipIOType - from Tulip doc for ENUM SCANNER_IO_TYPE
; 1 = USB, 2 = Parallel, 3 = SCSI, 4 = DOT4, 5 = IP (network), 6 = USB2, 7 = 1394 (firewire).
; 
[HP8200.Usb.AddReg]
; This all depends on which kernel services you need
; Hardware configuration is not known
HKR,,HardwareConfig,1,1
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,"usbscan.sys"
HKR,DeviceData,TulipIOType,0x10001,1

[HP8200.SCSI.AddReg]
; This all depends on which kernel services you need
; Hardware configuration is not known
HKR,,HardwareConfig,1,1
HKR,,DevLoader,,*NTKERN
HKR,,NTMPDriver,,"scsimap.sys,scsiscan.sys"
HKR,DeviceData,TulipIOType,0x10001,3

[HP8200.CurrentDevice]
; This marks this SW instance as a the most current install device.
; VendorSetup needs this to determine the HW devnode for the current device.
HKR,,LastInstalled,,"True"

[HP8200.RegisterDlls.WIA]
11,,hpgt82.dll,1
11,,hpgcwiam.dll,1

[HP8200.RegisterDlls.STI]
11,,hpgt82.dll,1
11,,hpgctusd.dll,1

[HP8200.CopyFiles]
hpgctusd.dll
hpgcvsco.dll
hpgt82.dll

[HP8200.CopyFiles.WIA]
hpgcwiam.dll
hpgt82.dll
hpgcvsco.dll

[HP8200.CopyDS]

[HP8200.Usb.WDMdriver]
; Copy the kernel drivers that are needed.
usbscan.sys,usbscan.sy_

[HP8200.SCSI.WDMdriver]
; Copy the kernel drivers that are needed.
scsiscan.sys,scsiscan.sy_
scsimap.sys,scsimap.sy_

[Coinstaller.CopyFiles]
hpgcvsco.dll

[SourceDisksNames]
99=%DiskName%,,

[SourceDisksFiles]
hpgctusd.dll=99
hpgcvsco.dll=99
hpsj95ci.dll=99
usbscan.sy_=99
hpgcwiam.dll=99
hpgt82.dll=99

[Strings]
; Always put strings down here so they can be easily localized to
; other languages.
HP="Hewlett-Packard"
Mfg="Hewlett-Packard"
DiskName="HP Scanning Software"
HPImageClass.desc="HP Win95 Lockout Class"
HPSJ8200Series="hp scanjet 8200 series"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web5, load: 1.34