LANTASTI.TXT Driver File Contents (hpen1207.zip)

<================================================================>
<                       HEWLETT PACKARD                          >
<            EN1207D-TX 10/100 Fast Ethernet PCI Adapter         >
<                   SOFTWARE DRIVER SUPPORT                      >
<                                                                >
<            Copyright 1997-1998 HEWLETT PACKARD                 >
<                     All Rights Reserved.                       >
<                                                                >
<================================================================>

  Content:
  --------

      A) Install HP drivers for LANtastic 5.0

      B) Install HP drivers for LANtastic 6.0


A) Install HP drivers for LANtastic 5.0
   ========================================

   LANtastic 5.0 can support following driver: NDIS driver


   Using the NDIS driver:
   ----------------------
   For NDIS, HP provides the "HPND2.DOS" driver for
   the EN1207D-TX PCI Fast Ethernet adapter.  User can use
   the "HPND2.DOS" driver to replace AEXNDIS.DOS which is the
   NDIS driver offered by ARTISOFT.

   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\HPND2.DOS      -------> By HP


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

        C:\LANTASTI\AI-NDIS BIND_TO=HPND2_NIF
        C:\LANTASTI\AILANBIO
        C:\LANTASTI\REDIR MachineName


   Example  -----  PROTOCOL.INI

        [PROTMAN]
           DRIVERNAME = PROTMAN$
           DYNAMIC = YES

        [HPND2_NIF]
           DRIVERNAME = HPND2$

   Comments:
     If you are using PROTMAN.DOS V1.x, you must use the NO_BIND
     option on the AI-NDIS command line in STARTNET.BAT,
     and you need to run NETBIND.EXE V1.x before AILANBIO.EXE.


B) Install HP drivers for LANtastic 6.0
   ========================================

   LANtastic 6.0 can support the following driver: NDIS driver


  Using NDIS driver:
  ------------------

   To install HP's NDIS driver "HPND2.DOS", you can use the
   LANtastic 6.0  install program, and select "NDIS support for
   network adapters" then insert HP's EN1207D-TX driver
   diskette, and type the path "A:\NDIS\DOS".  The Install program 
   will search for "HPND2.DOS" and "PROTOCOL.INI" and copy these two
   files to the target directory.

   If you have already installed LANtastic 6.0 and need to install
   HP's PCI Ethernet Adapter, just replace AEXNDIS.DOS with
   HP's NDIS driver "HPND2.DOS" in CONFIG.SYS

   "HPND2.DOS"  is an NDIS driver supported by HP
   "AEXNDIS.DOS" is an NDIS driver supported by ARTISOFT


   Example  -----  CONFIG.SYS

        DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
        DEVICE=C:\LANTASTI\HPND2.DOS        -------> By HP


   Example  -----  AUTOEXEC.BAT / STARTNET.BAT

    @echo ===== Begin LANtastic configuration =====
    SET LAN_CFG=C:\LANTASTI
    PATH C:\LANTASTI;%PATH%
    SET LAN_DIR=C:\LANTASTI.NET

    rem Please obtain the NETBEUI.EXE program from Microsoft
    NETBEUI
    AI-NDIS BIND_TO=AEXNDIS_NIF
    AILANBIO @STARTNET.CFG
    REDIR THOMAS @STARTNET.CFG

    SERVER C:\LANTASTI.NET @STARTNET.CFG
    NET LOGIN \\THOMAS
    @echo ===== End LANtastic configuration =====


   Example  -----  Protocol.ini

    [PROTMAN]
    Priority=NETBEUI
      DriverName = PROTMAN$
      Dynamic = Yes

    [NETBEUI_XIF]
      DriverName = netbeui$
      Sessions = 6
      NCBS = 12
      Bindings = HPND2_NIF
      LANABASE = 1

    [HPND2_NIF]
      DriverName = HPND2$

-----
All trademarks or brand names mentioned are properties
of their respective companies.

--- End of File ---

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 1.04