Windows 95, OSR2 Introduction: ------------- This document describes the procedure to install Windows 95 and OSR2 driver for D-Link DFE-538TX 10/100 Adapter. Location of Driver: \WIN95\DLKRTS.SYS Installing driver procedure on Microsoft Windows 95 : ----------------------------------------------------- Before you start with the installation process, make sure that your adapter should be properly installed in your PCI bus slot. Executing Windows 95, it will auto-detect your system configuration and find the adapter hardware. ( If Win95 does not prompt that it detects the PCI Ethernet adapter, there must be something wrong with the D-Link DFE-538TX 10/100 Adapter or your system enviroment.) 1. Ask you to select which driver you want to install, select "Driver from disk provided by hardware manufacturer". 2. Insert the D-Link DFE-538TX driver disk into drive A and specify the setup file pathname A:\WIN95. 3. Windows 95 will appear some messages to insert Windows 95 system disk to complete setup step. 4. Windows 95 will finish the other installation procedure automatically, then you restart the system.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.